My Inquiry
My Account
Renesas HI4P0201-5Z
- Part No.:
- HI4P0201-5Z
- Manufacturer:
- Renesas
- Package:
- 20-LCC (J-Lead)
- Datasheet:
-
HI4P0201-5Z.pdf
- Description:
- IC SWITCH SPST-NCX4 80OHM 20PLCC
- Quantity:
- Payment:
- Shipping:
Inventory:1,212
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
HI4P0201-5Z from Intersil is a quad SPST CMOS analog switch in 20-lead PLCC package, featuring 185ns turn-on time, 55Ω typical ON resistance, ±15V analog signal range, and 80mA maximum analog current handling. It operates across 0°C to 75°C and supports high-frequency analog switching in precision instrumentation signal routing.
For engineers reviewing the HI4P0201-5Z datasheet, HI4P0201-5Z pinout, HI4P0201-5Z application, or HI4P0201-5Z equivalent, this device is evaluated for low-leakage, break-before-make switching in rail-to-rail analog paths with TTL/CMOS-compatible digital control and rugged DI construction eliminating latch-up.
Technical Context
The HI4P0201-5Z implements four independent SPST switches using dielectrically isolated (DI) CMOS process technology, enabling operation over ±15V analog rails without substrate SCR failure. Its internal reference cell and level shifter ensure TTL/CMOS logic compatibility across full temperature range.
Each switch provides break-before-make timing, 5.5pF OFF-state input/output capacitance, and <5nA typical OFF leakage at 25°C. The device requires dual ±15V supplies and does not support single-supply operation - HI-300 series is recommended for +5V-only systems.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Analog Voltage Range | ±15V - supports rail-to-rail analog signal switching without clipping or distortion |
| ON Resistance (rON) | 55Ω typ - ensures minimal signal attenuation and gain error in precision amplifier networks |
| Turn-On Time (tON) | 185ns typ - enables use in >1MHz sample-and-hold and multiplexed data acquisition |
| Off Isolation | 80dB at 100kHz - suppresses crosstalk between active and inactive channels in multi-path systems |
| Switch Leakage (IS(OFF)) | 2nA max at 25°C - preserves accuracy in high-impedance sensor interfaces and integrator circuits |
| Power Dissipation | 15mW at 25°C - allows dense placement in thermally constrained industrial modules |
| Digital Input Compatibility | TTL/CMOS - interfaces directly with microcontrollers, FPGAs, and logic families without level-shifting |
Pinout & Package
HI4P0201-5Z is housed in a 20-lead plastic leaded chip carrier (PLCC) package with gull-wing leads, RoHS-compliant matte tin plating, and MSL rating compatible with wave soldering only (not reflow).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 2, 3, 4 | A1–A4 (Analog Inputs) | Independent source terminals for each of four SPST switches |
| 5, 6, 7, 8 | OUT1–OUT4 (Analog Outputs) | Drain terminals routed to common output nodes per switch |
| 9, 10 | V−, GND | Negative supply and substrate reference; GND serves as logic ground reference |
| 11, 12 | IN1–IN4 (Digital Control Inputs) | Active-high TTL/CMOS inputs controlling respective switch ON/OFF state |
| 13, 14 | V+, VREF | Positive supply rail (+15V) and internal reference voltage node (open or tied to V+) |
| 15–20 | NC, NC, NC, NC, NC, NC | No-connect pins - electrically isolated; must remain unconnected per datasheet |
Key Features
| Feature | Design Value |
|---|---|
| Dielectric Isolation (DI) Construction | Eliminates latch-up and substrate SCR failure modes - critical for reliability in harsh industrial environments |
| Break-Before-Make Switching | Prevents momentary short-circuit between signal paths during state transitions - essential for fault-tolerant routing |
| Low 5.5pF OFF Capacitance | Minimizes capacitive coupling and feedthrough in high-frequency (>1MHz) analog signal chains |
| Rugged ±22V Absolute Max Supply | Provides 7V headroom beyond ±15V operating rails - accommodates transient overvoltage events |
| Pb-Free (RoHS Compliant) | Matte tin termination compatible with SnPb and Pb-free wave solder processes - meets modern environmental compliance |
Applications
| High-Frequency Analog Switching | Sample-and-Hold Circuits |
|---|---|
Use Scenario: Multiplexing multiple sensor outputs into a shared ADC channel in real-time test equipment. IC Role / Device Role / Timing Role: Quad SPST analog switch providing low-distortion, fast-settling signal path selection under microcontroller control. Use Value: 185ns tON and 80dB off-isolation enable accurate sub-microsecond sampling with minimal inter-channel crosstalk. |
Use Scenario: Capturing instantaneous voltage levels from RF detector outputs for envelope analysis. IC Role / Device Role / Timing Role: Precision hold switch isolating capacitor charge during acquisition phase with ultra-low leakage. Use Value: 2nA max OFF leakage at 25°C preserves sampled voltage integrity for >10ms hold periods. |
| Digital Filters | Operational Amplifier Gain Switching |
Use Scenario: Reconfiguring feedback network topology in switched-capacitor filter banks for programmable cutoff frequency. IC Role / Device Role / Timing Role: Low-rON, low-capacitance analog switch selecting discrete capacitor values in filter tuning paths. Use Value: 55Ω rON and 5.5pF CS(OFF) maintain filter Q-factor stability and minimize settling time jitter. |
Use Scenario: Dynamically adjusting closed-loop gain of instrumentation amplifiers in automated calibration systems. IC Role / Device Role / Timing Role: Rail-to-rail analog switch routing feedback resistors to configure gain without introducing offset errors. Use Value: ±15V analog range and break-before-make action prevent gain discontinuity and output transients during switching. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar quad SPST analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| HI9P0201-5Z | 16-lead SOIC package; identical electrical specs but lower thermal resistance (θJA = 110°C/W vs. 80°C/W) | Better suited for surface-mount PCBs with space constraints and moderate power dissipation | Select when board area is limited and wave-solder compatibility is not required |
| ADG1414BRUZ | 44V supply rating; 1.8Ω rON; SPI interface instead of parallel TTL/CMOS control | Requires digital controller with SPI support; superior ON resistance but higher complexity and cost | Select when ultra-low rON and extended supply range outweigh need for simple parallel control |
Compared with HI9P0201-5Z and ADG1414BRUZ, the HI4P0201-5Z offers proven PLCC reliability for through-hole industrial modules, direct TTL/CMOS compatibility without protocol overhead, and DI robustness - making it optimal for legacy-replacement and high-EMI environments where simplicity and latch-up immunity are prioritized.
Availability
HI4P0201-5Z is available at Aetrix Electronics and suitable for high-frequency analog switching, sample-and-hold circuitry, digital filters, operational amplifier gain switching networks, and industrial instrumentation requiring stable component supply and long-term obsolescence management.
Supply support for HI4P0201-5Z includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Intersil Corporation is a leading provider of precision analog and power management solutions, acquired by Renesas Electronics in 2017 and integrated into its analog product portfolio.
The HI-200/HI-201 family was designed for high-reliability, rail-to-rail analog signal routing in military, aerospace, and industrial test equipment where latch-up immunity and predictable switching behavior are mandatory.
FAQ
What is the operating temperature range for HI4P0201-5Z?
The HI4P0201-5Z is rated for operation from 0°C to 75°C, as specified in the ordering information table of FN3121 Rev 9.00. This commercial-grade temperature range aligns with its 20-lead PLCC packaging and Pb-free construction. Operation outside this range is not characterized and may result in degraded performance or reliability loss for HI4P0201-5Z.
Does HI4P0201-5Z support single-supply operation?
No, HI4P0201-5Z does not support single-supply operation. Its internal switching threshold is optimized for ±15V dual supplies, and the datasheet explicitly states that single-supply use is unsupported. For +5V-only systems, Intersil recommends the HI-300 series - HI4P0201-5Z must be powered with separate positive and negative rails to function correctly.
What is the maximum analog signal voltage HI4P0201-5Z can handle?
The HI4P0201-5Z supports an analog signal range of ±15V, meaning it can pass signals from −15V to +15V without distortion or conduction loss. Its absolute maximum rating allows up to ±22V supply rails, but analog input voltage must stay within (V+) +2V to (V−) −2V - so with ±15V supplies, the safe analog input window remains ±15V for HI4P0201-5Z.
Is HI4P0201-5Z pin-compatible with other HI-201 variants like HI3-0201-5Z?
No, HI4P0201-5Z is not pin-compatible with HI3-0201-5Z. HI4P0201-5Z uses a 20-lead PLCC package with specific pin assignments including six no-connect (NC) pins, while HI3-0201-5Z is a 16-lead PDIP device with different pinout and terminal count. Mechanical and electrical layout changes are required when substituting HI4P0201-5Z for any other HI-201 variant.
What does "NO LONGER AVAILABLE OR SUPPORTED" mean for HI4P0201-5Z in the datasheet?
The "NO LONGER AVAILABLE OR SUPPORTED" note indicates that HI4P0201-5Z has been discontinued by the original manufacturer (Intersil/Renesas) and is no longer in active production. However, Aetrix Electronics maintains legacy inventory and provides traceable, tested units with full documentation support - ensuring continued access for repair, maintenance, and long-lifecycle industrial programs relying on HI4P0201-5Z.
HI4P0201-5Z Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 80Ohm
- Channel-to-Channel Matching (ΔRon):
- -
- Voltage - Supply, Single (V+):
- -
- Voltage - Supply, Dual (V±):
- ±15V
- Switch Time (Ton, Toff) (Max):
- 240ns, 500ns (Typ)
- -3db Bandwidth:
- -
- Charge Injection:
- -
- Channel Capacitance (CS(off), CD(off)):
- 5.5pF, 5.5pF
- Current - Leakage (IS(off)) (Max):
- 50nA
- Crosstalk:
- -
- Operating Temperature:
- 0°C ~ 75°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 20-PLCC (9x9)
HI4P0201-5Z FAQ
1.How can I place an order for HI4P0201-5Z through Aetrix?
Please submit a Request for Quotation (RFQ) for HI4P0201-5Z on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for HI4P0201-5Z reliable?
The price and inventory of HI4P0201-5Z are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for HI4P0201-5Z is usually 5 days.
3.What payment methods are accepted for HI4P0201-5Z?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for HI4P0201-5Z transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for HI4P0201-5Z?
HI4P0201-5Z orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your HI4P0201-5Z order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for HI4P0201-5Z?
For technical support, including HI4P0201-5Z datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your HI4P0201-5Z requirements.
6.How does Aetrix verify that HI4P0201-5Z is sourced from the original manufacturer or authorized distributors?
All HI4P0201-5Z products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that HI4P0201-5Z meets industry standards.
7.What is the process for return or replacement of HI4P0201-5Z?
All HI4P0201-5Z units undergo pre-shipment inspection (PSI). If there is an issue with HI4P0201-5Z, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The HI4P0201-5Z part is unused and in its original packaging.
Return procedure for HI4P0201-5Z:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
HI4P0201-5Z Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
