My Inquiry
My Account
Analog Devices Inc. HMC220AMS8E
- Part No.:
- HMC220AMS8E
- Manufacturer:
- Analog Devices Inc.
- Category:
- RF Mixers
- Package:
- 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
- Datasheet:
-
HMC220AMS8E.pdf
- Description:
- IC MIXER 5-12GHZ UP/DWN 8MSOP
- Quantity:
- Payment:
- Shipping:
Inventory:3,366
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
HMC220AMS8E from Analog Devices (formerly Hittite Microwave) is a GaAs MMIC double-balanced mixer in MSOP-8 package, operating RF/LO from 5–12 GHz and IF from DC–4 GHz, with 8.5 dB typical conversion loss and +13 dBm LO drive requirement, used in microwave radio and VSAT up/downconversion stages.
For engineers reviewing the HMC220AMS8E datasheet, HMC220AMS8E pinout, HMC220AMS8E application, or HMC220AMS8E equivalent, key selection criteria include its wideband IF response, high LO-to-RF isolation (25 dB typ), low noise figure (8.5 dB typ), and RoHS-compliant matte Sn lead finish with MSL1 rating.
Technical Context
This passive MMIC mixer uses monolithic GaAs Schottky diodes and integrated planar transformer baluns to achieve true double-balanced operation without external hybrids. It supports bidirectional signal flow as upconverter, downconverter, bi-phase modulator, or phase comparator.
Performance is specified across –40°C to +85°C with stable conversion gain and IP3 over temperature and LO drive variations. Absolute maximum ratings include +27 dBm LO input and +13 dBm RF/IF input, with Class 1A ESD sensitivity requiring strict handling protocols.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| RF/LO Frequency Range | 5–12 GHz - covers full C-band and lower X-band for satellite and point-to-point radio links |
| IF Frequency Range | DC–4 GHz - enables baseband I/Q demodulation and wide IF sampling without external filtering |
| Conversion Loss | 8.5 dB typ @ LO = +13 dBm, IF = 100 MHz - defines minimum system NF penalty in receiver chains |
| LO–RF Isolation | 25 dB typ @ +13 dBm LO - suppresses LO leakage into antenna path, easing front-end filter requirements |
| Input IP3 | 16 dBm typ @ LO = +10 dBm - determines third-order intermodulation headroom in dense signal environments |
| 1 dB Compression (Input) | 8 dBm typ @ LO = +10 dBm - sets upper RF input power limit before gain compression degrades linearity |
| Noise Figure (SSB) | 8.5 dB typ - directly impacts receiver sensitivity in low-SNR microwave applications |
Pinout & Package
Package: RoHS-compliant MSOP-8 (3.0 × 3.0 × 0.85 mm), matte Sn lead finish, MSL1 rated (260 °C peak reflow).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | RF Input | Differential RF port requiring 50 Ω balanced drive; connects to antenna or PA output via balun |
| 2 | Ground | RF ground reference; must be soldered directly to PCB ground plane with multiple vias |
| 3 | LO Input | Differential LO port; accepts +10 to +13 dBm drive; sensitive to impedance mismatch |
| 4 | Ground | LO ground reference; isolated from RF ground in layout to minimize coupling |
| 5 | IF Output | Differential IF output; DC–4 GHz bandwidth supports direct baseband or IF sampling |
| 6 | Ground | IF ground reference; critical for maintaining common-mode rejection in differential IF path |
| 7 | Ground | Package thermal and RF ground; ties die substrate to PCB ground plane |
| 8 | RF Input (Complement) | Complementary RF terminal completing balanced input pair; not interchangeable with Pin 1 |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-miniature MSOP-8 package | 3.0 × 3.0 mm footprint saves board space in compact microwave modules and phased-array subassemblies |
| Monolithic GaAs Schottky diode core | Eliminates discrete balun components and assembly tolerances, ensuring consistent performance across production lots |
| DC–4 GHz IF bandwidth | Supports zero-IF and low-IF architectures without external IF transformers or filters |
| +13 dBm LO drive optimization | Enables use with low-power synthesizers while maintaining >25 dB LO–RF isolation and <9 dB conversion loss |
| Class 1A ESD rating | Requires grounded wrist strap and ionized air handling but allows integration into automated SMT lines with proper controls |
Applications
| Microwave Point-to-Point Radio | VSAT Outdoor Unit (ODU) |
|---|---|
|
Use Scenario: Full-duplex transceiver in 6–11 GHz licensed backhaul links requiring simultaneous Tx/Rx on adjacent channels. IC Role / Device Role / Timing Role: Downconverter for 7.5 GHz RF to 700 MHz IF in receive chain; upconverter for 700 MHz IF to 7.6 GHz RF in transmit chain. Use Value: 25 dB LO–RF isolation prevents Tx LO leakage from desensitizing Rx path; 8.5 dB conversion loss maintains link budget margin. |
Use Scenario: Ku-band satellite terminal ODU performing LNB downconversion and BUC upconversion. IC Role / Device Role / Timing Role: Dual-role mixer: LO-driven downconversion of 10.7–12.75 GHz satellite signals to 950–2150 MHz IF; LO-driven upconversion of IF to transmit band. Use Value: DC–4 GHz IF range accommodates full 950–2150 MHz L-band IF without band-splitting; RoHS-compliant packaging meets telecom environmental compliance. |
| Test & Measurement Signal Source | Phased Array Radar T/R Module |
|
Use Scenario: Local oscillator subsystem in broadband vector signal analyzer generating calibrated IF outputs for distortion analysis. IC Role / Device Role / Timing Role: Phase comparator for LO phase alignment verification; bi-phase modulator for IQ calibration tone generation. Use Value: Consistent conversion loss and IP3 across temperature ensure measurement repeatability; MSOP-8 enables dense layout in modular instrument backplanes. |
Use Scenario: Compact T/R module in X-band active electronically scanned array (AESA) radar requiring low-profile RF front-end components. IC Role / Device Role / Timing Role: Receive-path downconverter translating 8–12 GHz radar echoes to baseband for digital beamforming; transmit-path upconverter for waveform synthesis. Use Value: 85 °C max operating temperature supports conduction-cooled radar chassis; 3.0 mm × 3.0 mm size fits within tight T/R tile spacing constraints. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar double-balanced mixer applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| HMC1048LP4E | Wider RF/LO range (4–14 GHz), higher conversion loss (9.5 dB typ), larger 4×4 mm QFN package | Better suited for Ka-band extensions; less suitable for space-constrained C-band modules | Select when broader frequency coverage outweighs size and loss penalties |
| ADL5801ACPZ-R7 | Active mixer with 22 dB conversion gain, 5–12 GHz RF, requires Vcc bias; 50 Ω single-ended ports | Enables receiver gain staging without external LNA; incompatible with passive balun-based layouts | Select when system-level gain budget is constrained and DC power is available |
Compared with HMC220AMS8E, HMC1048LP4E trades higher loss and larger footprint for extended Ka-band support, while ADL5801ACPZ-R7 replaces passive architecture with active gain at the cost of added bias complexity and single-ended interface-neither is pin-compatible, and layout redesign is required for either alternative.
Availability
HMC220AMS8E is available at Aetrix Electronics and suitable for microwave radios, VSAT outdoor units, and test equipment requiring stable component supply with RoHS-compliant packaging and MSL1 reflow compatibility.
Supply support for HMC220AMS8E includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices acquired Hittite Microwave in 2014 and maintains its high-frequency RF portfolio, specializing in GaAs and SiGe MMICs for defense, aerospace, and communications infrastructure.
The HMC220AMS8E belongs to Hittite's legacy passive mixer product line, designed specifically for compact, high-isolation double-balanced mixing in licensed microwave bands where thermal stability and repeatable MMIC performance are critical.
FAQ
What is the recommended LO drive level for optimal performance of the HMC220AMS8E?
The HMC220AMS8E achieves best conversion loss (8.5 dB typ), noise figure (8.5 dB typ), and IP3 (16 dBm typ) at +13 dBm LO drive. Operation at +10 dBm increases conversion loss by ~1 dB and reduces IP3 by ~3 dBm. Drive below +7 dBm degrades isolation and increases conversion loss nonlinearly; do not exceed +27 dBm absolute maximum.
Does the HMC220AMS8E require external baluns for operation?
No. The HMC220AMS8E integrates planar transformer baluns on-die for all three ports (RF, LO, IF), enabling direct connection to 50 Ω single-ended sources via external hybrid couplers or differential drivers. External baluns are unnecessary unless custom impedance transformation is needed beyond the device's native 50 Ω design point.
Is the HMC220AMS8E pin-compatible with the non-RoHS HMC220AMS8?
Yes. HMC220AMS8E shares identical MSOP-8 pinout, outline dimensions, and electrical specifications with HMC220AMS8. The only differences are RoHS-compliant matte Sn lead finish (vs. Sn/Pb), higher 260 °C MSL1 reflow rating (vs. 235 °C), and updated package marking "H220A" with 4-digit lot code.
What is the maximum operating temperature for continuous use of the HMC220AMS8E?
The HMC220AMS8E is rated for continuous operation from –40°C to +85°C ambient. Performance parameters (conversion loss, IP3, isolation) are guaranteed across this range per datasheet specs. Exceeding +85°C ambient risks parametric shift and accelerated degradation; derating is required above this limit.
Can the HMC220AMS8E be used for phase comparison applications?
Yes. The HMC220AMS8E's double-balanced architecture provides inherent phase-sensitive mixing, making it suitable as a phase comparator in PLLs or coherent detection systems. When RF and LO inputs carry signals of equal frequency, the IF output amplitude is proportional to the cosine of their phase difference, enabling precise phase error extraction.
HMC220AMS8E Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Series:
- -
- Package/Case:
- 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
- Packaging:
- Strip
- Product Status:
- Obsolete
- RF Type:
- General Purpose
- Frequency:
- 5GHz ~ 12GHz
- Number of Mixers:
- 1
- Gain:
- -
- Noise Figure:
- 7dB
- Secondary Attributes:
- Up/Down Converter
- Current - Supply:
- -
- Voltage - Supply:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-MSOP
HMC220AMS8E FAQ
1.How can I place an order for HMC220AMS8E through Aetrix?
Please submit a Request for Quotation (RFQ) for HMC220AMS8E on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for HMC220AMS8E reliable?
The price and inventory of HMC220AMS8E are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for HMC220AMS8E is usually 5 days.
3.What payment methods are accepted for HMC220AMS8E?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for HMC220AMS8E transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for HMC220AMS8E?
HMC220AMS8E orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your HMC220AMS8E order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for HMC220AMS8E?
For technical support, including HMC220AMS8E datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your HMC220AMS8E requirements.
6.How does Aetrix verify that HMC220AMS8E is sourced from the original manufacturer or authorized distributors?
All HMC220AMS8E products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that HMC220AMS8E meets industry standards.
7.What is the process for return or replacement of HMC220AMS8E?
All HMC220AMS8E units undergo pre-shipment inspection (PSI). If there is an issue with HMC220AMS8E, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The HMC220AMS8E part is unused and in its original packaging.
Return procedure for HMC220AMS8E:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
HMC220AMS8E Tags
-
MAX2671EUT+T
Analog Devices Inc./Maxim Integrated
-
ADEX-10+
Mini-Circuits
-
ADE-2+
Mini-Circuits
-
ADE-1+
Mini-Circuits
-
LT5560EDD#PBF
Analog Devices Inc.
-
LT5560EDD#TRPBF
Analog Devices Inc.
-
LTC5562IUC#TRPBF
Analog Devices Inc.
-
MAX2681EUT+T
Analog Devices Inc./Maxim Integrated
-
ADE-1ASK+
Mini-Circuits
-
ADE-1L+
Mini-Circuits
-
ADL5350ACPZ-R7
Analog Devices Inc.
-
AD608ARZ-RL
Analog Devices Inc.
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
