My Inquiry
My Account
Analog Devices Inc. HMC410AMS8GETR
- Part No.:
- HMC410AMS8GETR
- Manufacturer:
- Analog Devices Inc.
- Category:
- RF Mixers
- Package:
- 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
- Datasheet:
-
HMC410AMS8GETR.pdf
- Description:
- IC MIXER HI IP3 DBL-BAL
- Quantity:
- Payment:
- Shipping:
Inventory:2,525
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
HMC410AMS8GETR from Analog Devices (formerly Hittite Microwave) is a GaAs MMIC passive double-balanced mixer designed for RF-to-IF downconversion in 9–15 GHz systems, delivering 8 dB typical conversion loss, +24 dBm input IP3, and 40 dB LO/RF isolation. It operates with +13 to +19 dBm LO drive, requires no external bias or components, and targets microwave radio and VSAT infrastructure.
For engineers reviewing the HMC410AMS8GETR datasheet, HMC410AMS8GETR pinout, HMC410AMS8GETR application, or HMC410AMS8GETR equivalent, key selection criteria include its 9–15 GHz RF/LO bandwidth, DC–2.5 GHz IF range, MSOP8G package compatibility, and high-linearity performance at elevated LO drive levels.
Technical Context
The HMC410AMS8GETR implements a passive double-balanced diode ring architecture using GaAs Schottky barrier diodes, enabling inherent LO–RF and LO–IF isolation without active circuitry. Its balanced topology suppresses even-order harmonics and local oscillator leakage.
It functions as a broadband downconverter with fixed IF port DC coupling and AC-coupled LO input matched to 50 Ω. All ground pins-including exposed paddle-must be soldered to RF ground per layout guidelines to maintain specified isolation and conversion loss.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| RF/LO Frequency Range | 9–15 GHz: supports full-band operation in E-band point-to-point radios and military SATCOM uplinks. |
| IF Frequency Range | DC–2.5 GHz: enables baseband and low-IF architectures without external DC blocking on IF output. |
| Conversion Loss | 8 dB typ (max 11 dB): defines signal path attenuation; impacts receiver noise figure and dynamic range budget. |
| Input IP3 | +24 dBm typ: determines two-tone intermodulation rejection in dense RF environments like multi-channel VSAT hubs. |
| LO/RF Isolation | 40 dB typ: minimizes LO radiation into antenna paths, reducing spurious emissions and easing filter requirements. |
| LO Drive Range | +13 to +19 dBm: specifies required LO power level; higher drive improves IP3 but increases power consumption. |
| Operating Temperature | −40°C to +85°C: qualifies for outdoor microwave radio enclosures and industrial-grade wireless infrastructure. |
Pinout & Package
Package: MSOP8G (Mini Small Outline Package, 8-lead, exposed thermal paddle), RoHS-compliant with matte tin finish (HMC410AMS8GE variant); MSL1 rated, max reflow 260 °C.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 8 | GND | RF and DC ground terminals; must be soldered to PCB ground plane with multiple vias for thermal and RF integrity. |
| 2 | LO | AC-coupled 50 Ω input; accepts +13 to +19 dBm LO signal without external matching network. |
| 3, 4, 6 | N/C | No internal connection; externally grounded per evaluation board layout to minimize parasitic coupling. |
| 5 | IF | DC-coupled output; supports DC–2.5 GHz IF; limited to ±4 mA DC current to prevent die damage. |
| 7 | RF | DC-coupled 50 Ω RF input; handles +20 dBm max RF input; requires external DC blocking if DC not needed. |
Key Features
| Feature | Design Value |
|---|---|
| No external bias or components required | Reduces BOM count and layout complexity; eliminates DC blocking capacitors and bias tees in LO/RF paths. |
| High LO/RF isolation (40 dB) | Minimizes LO leakage into antenna feed, easing compliance with spectral mask requirements in licensed bands. |
| DC-coupled IF output | Enables direct connection to baseband ADCs or low-IF filters without series capacitors or level-shifting circuits. |
| Exposed thermal paddle | Provides low-thermal-resistance path to PCB ground; essential for maintaining junction temperature below 125°C at full LO drive. |
| Class 1A ESD rating | Requires strict handling per JESD22-A114; prevents gate oxide damage during assembly without special protection. |
Applications
| Long-Haul Radio Platforms | Microwave Radio |
|---|---|
Use Scenario: High-capacity backhaul links operating in 11–13 GHz licensed bands with 256-QAM modulation and tight adjacent-channel selectivity requirements. IC Role / Device Role / Timing Role: Downconverting RF carrier to low-IF for digitization and demodulation in dual-conversion receivers. Use Value: +24 dBm IP3 ensures minimal intermodulation distortion under multi-carrier loading; 8 dB conversion loss preserves SNR margin. | Use Scenario: Compact 6–12 GHz point-to-point radios deployed in cellular small-cell aggregation networks. IC Role / Device Role / Timing Role: Passive mixer core in compact front-end modules where size, power, and linearity are constrained. Use Value: MSOP8G package enables high-density RF layout; no bias simplifies power domain design and reduces standby current. |
| VSAT Terminals | Military SATCOM Uplinks |
Use Scenario: Ku-band VSAT hub stations receiving multiple simultaneous uplink signals from remote terminals. IC Role / Device Role / Timing Role: First-stage mixer in wide-dynamic-range receive chains requiring high IP3 and LO rejection. Use Value: 40 dB LO/RF isolation prevents LO breakthrough into LNA stages; DC–2.5 GHz IF supports flexible channel filtering. | Use Scenario: Tactical SATCOM terminals operating in contested spectrum with intentional jamming and high-power interferers. IC Role / Device Role / Timing Role: Front-end mixer in hardened transceivers where reliability across −40°C to +85°C is mandatory. Use Value: Specified operation over full industrial temperature range ensures consistent conversion loss and IP3 without calibration. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar passive double-balanced mixer applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| HMC1048LP4E | Wider RF/LO range (6–18 GHz), higher conversion loss (9.5 dB typ), lower IP3 (+21 dBm). | Better suited for multi-band test equipment; less optimal for high-linearity 12 GHz VSAT hubs. | Select when broader frequency coverage outweighs IP3 and loss requirements. |
| Qorvo QM11036 | Same 9–15 GHz band, +23 dBm IP3, 8.5 dB conversion loss, 32 dB LO/RF isolation, 3×3 mm QFN. | Smaller footprint but lower isolation; requires tighter layout control to meet spurious emission limits. | Prefer for space-constrained designs where 8 dB loss and 40 dB isolation are non-negotiable. |
Compared with HMC410AMS8GETR, HMC1048LP4E trades linearity for bandwidth, while QM11036 offers miniaturization at the cost of isolation-making HMC410AMS8GETR the optimal choice for high-reliability, high-isolation microwave radio receivers.
Availability
HMC410AMS8GETR is available at Aetrix Electronics and suitable for long-haul radio platforms, microwave radio systems, and VSAT infrastructure requiring stable component supply, extended temperature operation, and repeatable RF performance.
Supply support for HMC410AMS8GETR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices acquired Hittite Microwave in 2014 and integrates its high-frequency RF portfolio into precision RF signal chain solutions.
The HMC mixer family was developed specifically for microwave and millimeter-wave communications infrastructure, emphasizing high linearity, broadband operation, and robust SMT packaging for automated manufacturing.
FAQ
What is the maximum RF input power rating for the HMC410AMS8GETR?
The HMC410AMS8GETR has an absolute maximum RF input rating of +20 dBm. Exceeding this level risks permanent damage to the GaAs diode junctions. For reliable operation, RF input should be kept ≤ +14 dBm (P1dB point) to avoid compression and distortion. The HMC410AMS8GETR datasheet specifies +14 dBm as the typical 1 dB compression point at +17 dBm LO drive and 14.45 GHz RF frequency.
Does the HMC410AMS8GETR require external DC biasing or matching components?
No, the HMC410AMS8GETR is a fully passive double-balanced mixer and requires no external DC bias, pull-up resistors, or impedance-matching networks. Its LO, RF, and IF ports are internally matched to 50 Ω (LO and RF AC-coupled, IF DC-coupled). This eliminates the need for external baluns, bias tees, or DC blocks-simplifying design and reducing bill-of-materials cost for the HMC410AMS8GETR.
What is the recommended PCB grounding strategy for the HMC410AMS8GETR?
All ground pins (1 and 8) plus the exposed thermal paddle must be soldered directly to a solid RF ground plane using multiple thermal vias (≥6 per pad). The HMC410AMS8GETR evaluation board (101650) uses Rogers 4350 substrate with 50 Ω microstrip routing and via-fenced ground zones. Inadequate grounding degrades LO/RF isolation and increases conversion loss-both verified in HMC410AMS8GETR characterization data.
Can the HMC410AMS8GETR be used in upconverter configurations?
Yes, the HMC410AMS8GETR supports upconversion per its functional diagram and measured upconverter performance plots. When used as an upconverter, the IF port becomes the input and the RF port the output, with LO drive unchanged (+13 to +19 dBm). Conversion gain remains ~8 dB, though LO–RF isolation drops slightly versus downconversion mode-verified in HMC410AMS8GETR application notes.
What is the ESD sensitivity classification for the HMC410AMS8GETR?
The HMC410AMS8GETR is classified as Class 1A per JEDEC JS-001 (HBM), meaning it withstands ≤ 250 V HBM ESD stress. Handling requires grounded wrist straps, conductive foam storage, and ionized air workstations. The HMC410AMS8GETR's GaAs process is inherently sensitive; uncontrolled ESD can permanently degrade conversion loss or cause open-circuit failure in the diode ring.
HMC410AMS8GETR Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Series:
- -
- Package/Case:
- 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- RF Type:
- General Purpose
- Frequency:
- 9GHz ~ 15GHz
- Number of Mixers:
- 1
- Gain:
- -
- Noise Figure:
- 8dB
- Secondary Attributes:
- Up/Down Converter
- Current - Supply:
- -
- Voltage - Supply:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-MSOPG
HMC410AMS8GETR FAQ
1.How can I place an order for HMC410AMS8GETR through Aetrix?
Please submit a Request for Quotation (RFQ) for HMC410AMS8GETR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for HMC410AMS8GETR reliable?
The price and inventory of HMC410AMS8GETR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for HMC410AMS8GETR is usually 5 days.
3.What payment methods are accepted for HMC410AMS8GETR?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for HMC410AMS8GETR transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for HMC410AMS8GETR?
HMC410AMS8GETR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your HMC410AMS8GETR order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for HMC410AMS8GETR?
For technical support, including HMC410AMS8GETR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your HMC410AMS8GETR requirements.
6.How does Aetrix verify that HMC410AMS8GETR is sourced from the original manufacturer or authorized distributors?
All HMC410AMS8GETR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that HMC410AMS8GETR meets industry standards.
7.What is the process for return or replacement of HMC410AMS8GETR?
All HMC410AMS8GETR units undergo pre-shipment inspection (PSI). If there is an issue with HMC410AMS8GETR, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The HMC410AMS8GETR part is unused and in its original packaging.
Return procedure for HMC410AMS8GETR:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
HMC410AMS8GETR Tags
-
MAX2671EUT+T
Analog Devices Inc./Maxim Integrated
-
ADEX-10+
Mini-Circuits
-
ADE-2+
Mini-Circuits
-
ADE-1+
Mini-Circuits
-
LT5560EDD#PBF
Analog Devices Inc.
-
LT5560EDD#TRPBF
Analog Devices Inc.
-
LTC5562IUC#TRPBF
Analog Devices Inc.
-
MAX2681EUT+T
Analog Devices Inc./Maxim Integrated
-
ADE-1ASK+
Mini-Circuits
-
ADE-1L+
Mini-Circuits
-
ADL5350ACPZ-R7
Analog Devices Inc.
-
AD608ARZ-RL
Analog Devices Inc.
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
