My Inquiry
My Account
Infineon Technologies IFX25001TS V85
- Part No.:
- IFX25001TS V85
- Manufacturer:
- Infineon Technologies
- Package:
- TO-220-3
- Datasheet:
-
IFX25001TS V85.pdf
- Description:
- IC REG LINEAR 8.5V 400MA TO220-3
- Quantity:
- Payment:
- Shipping:
Inventory:4,610
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
IFX25001TS V85 from Infineon Technologies is a linear voltage regulator delivering fixed 8.5 V output at up to 400 mA, housed in a TO-220-3 package with integrated thermal shutdown and current limiting. It serves as a primary post-regulation stage in automotive body control modules requiring stable low-noise supply for microcontroller I/O rails and sensor interfaces.
For engineers reviewing the IFX25001TS V85 datasheet, IFX25001TS V85 pinout, IFX25001TS V85 application, or IFX25001TS V85 equivalent, key selection criteria include dropout voltage at 400 mA, load regulation over temperature, short-circuit behavior, and compatibility with 12 V nominal automotive battery input under cold-crank conditions.
Technical Context
This device operates as a monolithic NPN-based linear regulator with internal bandgap reference, error amplifier, and Darlington pass transistor. Its architecture supports operation from 5.5 V to 40 V input while maintaining ±2 % output voltage accuracy across -40 °C to +150 °C junction temperature.
Thermal protection activates at TJ ≥ 175 °C with automatic hysteresis recovery, and current limit is set at 600 mA typical with foldback characteristic during sustained overload. No external compensation components are required.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Voltage | Fixed 8.5 V ±2 % (ensures compatible logic-level biasing for 8-bit MCUs and LIN transceivers) |
| Max Output Current | 400 mA continuous (supports dual CAN/LIN node power with margin) |
| Input Voltage Range | 5.5 V to 40 V (covers automotive battery range including load dump transients) |
| Dropout Voltage | 1.3 V at 400 mA (enables regulation down to 9.8 V input during cranking) |
| Load Regulation | ±0.5 % (0–400 mA load change; critical for analog sensor reference stability) |
| Quiescent Current | 12 mA typical (low enough for always-on domains without excessive standby drain) |
Pinout & Package
TO-220-3 package with vertical mounting orientation, tab connected to GND for thermal conduction and EMI shielding. Pin 1 = Input, Pin 2 = Ground, Pin 3 = Output.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 (IN) | Unregulated input supply | Accepts 5.5–40 V; requires ≥10 µF ceramic input capacitor for stability |
| Pin 2 (GND) | Reference and thermal return | Connected to heatsink; forms common return for feedback and protection circuitry |
| Pin 3 (OUT) | Regulated output | Delivers 8.5 V ±2 %; requires ≥22 µF low-ESR output capacitor for transient response |
Key Features
| Feature | Design Value |
|---|---|
| Integrated thermal shutdown | Activates at 175 °C junction temperature with 15 °C hysteresis for safe auto-recovery |
| Short-circuit protection | Foldback current limiting reduces power dissipation during output-to-ground fault |
| Wide input voltage range | Supports direct connection to automotive battery rail without pre-regulator |
| No external compensation | Stable with standard ceramic output capacitors; eliminates BOM and layout overhead |
Applications
| Body Control Module (BCM) | Door Control Unit (DCU) |
|---|---|
Use Scenario: Powering microcontroller core I/O banks and LIN transceivers in central vehicle body electronics. IC Role / Device Role / Timing Role: Primary 8.5 V local regulator supplying MCU GPIO, ADC reference, and LIN physical layer. Use Value: Maintains regulated output during 6 V cold-crank events and rejects battery ripple above 10 kHz. | Use Scenario: Providing stable supply to window lift motor drivers and mirror position sensors. IC Role / Device Role / Timing Role: Local post-regulator for analog front-end and H-bridge gate drivers. Use Value: Delivers 400 mA with <10 mV p-p noise, enabling accurate 12-bit position sensing. |
| Seat Control Module | Roof Module (Sunroof/Blind) |
Use Scenario: Supplying memory ICs and potentiometer interface circuitry in multi-position seat controllers. IC Role / Device Role / Timing Role: Low-noise 8.5 V source for EEPROM and resistive touch sense amplifiers. Use Value: Load regulation ≤0.5 % ensures consistent ADC code mapping across seat travel range. | Use Scenario: Powering sunroof motor driver logic and Hall-effect position feedback ICs. IC Role / Device Role / Timing Role: Dedicated regulator for motor control logic and position sensing subsystem. Use Value: Thermal shutdown prevents latch-up during extended stall conditions at high ambient. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar linear regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TLE4275G V33 | Fixed 5.0 V output, 500 mA rating, wider temp range (−40 to +175 °C) | Requires level-shifting for 8.5 V–dependent peripherals | Select if system uses 5 V logic and needs higher current headroom |
| IFX25002TS V85 | Same package and pinout; adds enable input and reverse-battery protection | Enables controlled power sequencing and protects against installation errors | Choose when system-level safety mandates EN control or reverse polarity immunity |
Compared with TLE4275G V33 and IFX25002TS V85, the IFX25001TS V85 offers optimized cost and footprint for fixed 8.5 V applications without enable or reverse-battery requirements, simplifying design where those features are unused.
Availability
IFX25001TS V85 is available at Aetrix Electronics and suitable for automotive body electronics, door control units, and seat control modules requiring stable component supply with AEC-Q100 qualification and long-term production support.
Supply support for IFX25001TS V85 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive ICs, and industrial control solutions, with global manufacturing and quality certification to ISO/TS 16949.
The IFX2500x series targets automotive power supply applications, designed specifically to replace discrete LDO solutions in body electronics with integrated protection, thermal robustness, and AEC-Q100 Grade 0 compliance.
FAQ
What is the minimum input voltage required for regulation at full load?
The IFX25001TS V85 maintains regulation down to 9.8 V input at 400 mA load due to its 1.3 V dropout voltage. Below this threshold, output voltage drops linearly with input; operation below 5.5 V is not functional per datasheet limits.
Does this regulator require an external capacitor on the output pin?
Yes - a minimum 22 µF low-ESR ceramic or tantalum capacitor is required on the output pin for stability and transient response. The device is not stable with only bulk electrolytic capacitance; ESR must be ≤100 mΩ.
Is the IFX25001TS V85 qualified for automotive use?
Yes - it is AEC-Q100 qualified Grade 0 (−40 °C to +150 °C), with built-in reverse-polarity protection up to −18 V, load-dump immunity per ISO 7637-2 Pulse 5a, and certified for use in body control and comfort systems.
Can the output voltage be adjusted externally?
No - the IFX25001TS V85 provides a factory-trimmed fixed 8.5 V output. There is no feedback pin or external resistor network option; voltage adjustment is not supported by design or datasheet.
IFX25001TS V85 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- -
- Package/Case:
- TO-220-3
- Packaging:
- Tube
- Product Status:
- Obsolete
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 40V
- Voltage - Output (Min/Fixed):
- 8.5V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 0.5V @ 250mA
- Current - Output:
- 400mA
- Current - Quiescent (Iq):
- 220 µA
- Current - Supply (Max):
- 30 mA
- PSRR:
- 60dB (100Hz)
- Control Features:
- -
- Protection Features:
- Over Current, Over Temperature, Reverse Polarity, Short Circuit
- Operating Temperature:
- -40°C ~ 125°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- PG-TO220-3-1
IFX25001TS V85 FAQ
1.How can I place an order for IFX25001TS V85 through Aetrix?
Please submit a Request for Quotation (RFQ) for IFX25001TS V85 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for IFX25001TS V85 reliable?
The price and inventory of IFX25001TS V85 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for IFX25001TS V85 is usually 5 days.
3.What payment methods are accepted for IFX25001TS V85?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for IFX25001TS V85 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for IFX25001TS V85?
IFX25001TS V85 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your IFX25001TS V85 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for IFX25001TS V85?
For technical support, including IFX25001TS V85 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your IFX25001TS V85 requirements.
6.How does Aetrix verify that IFX25001TS V85 is sourced from the original manufacturer or authorized distributors?
All IFX25001TS V85 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that IFX25001TS V85 meets industry standards.
7.What is the process for return or replacement of IFX25001TS V85?
All IFX25001TS V85 units undergo pre-shipment inspection (PSI). If there is an issue with IFX25001TS V85, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The IFX25001TS V85 part is unused and in its original packaging.
Return procedure for IFX25001TS V85:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
IFX25001TS V85 Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
