Send an Inquiry

To receive a quote for your project, please fill in the following information, and we’ll get back to you promptly.

Submit Inventory List

Please fill in the following information, and we’ll get back to you promptly.

Home > Products > Integrated Circuits (ICs) > Power Management (PMIC) > Power Distribution Switches, Load Drivers

STMicroelectronics IPS1025HQ

Name: IPS1025HQ
Brand: STMicroelectronics
SKU: IPS1025HQ
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Compare

Part No.:: IPS1025HQ

Manufacturer:: STMicroelectronics

Category:: Power Distribution Switches, Load Drivers

Package:: 48-VFQFN Exposed Pad

Datasheet:: IPS1025HQ.pdf

Description:: HIGH EFFICIENCY, HIGH-SIDE SWITC

Quantity:: RFQ Add To RFQ list

Payment:

Shipping:

Inventory:697

Please send an inquiry. Send us your inquiry, and we will respond immediately.

Product details

Overview

IPS1025HQ from STMicroelectronics is a single-channel high-side switch IC designed for industrial load control, featuring 8 V to 60 V supply operation, ≤25 mΩ R_DS(on) at T_J = 125 °C, dual-threshold overload protection (IPKH/IPKL), and integrated junction + case over-temperature shutdown. It drives resistive, capacitive (e.g., incandescent lamps), and inductive loads with fast demagnetization and ground disconnection protection.

For engineers reviewing the IPS1025HQ datasheet, IPS1025HQ pinout, IPS1025HQ application, or IPS1025HQ equivalent, this device supports robust diagnostics via FLT1/FLT2 current-source fault pins, configurable IPD-based current-limiting modes, and compliance with IEC 61000-4-2/4/5 EMC standards in PowerSSO-24 and VFQFPN-48L packages.

Technical Context

The IPS1025HQ implements dual-threshold current limiting: an initial high threshold (IPKH = 15.4 A) active for DPK = 215 × C_PD µs (470 pF–470 nF), followed by steady-state limiting at IPKL = 8.0 A with ILIML = 3.5 A typical. Its active clamp circuit enables fast demagnetization of inductive loads by pulling OUT to V_CC−V_DEMAG (V_CC−72.5 V typical).

Thermal protection uses two independent sensors: junction shutdown triggers at T_JSD = 170 °C with 20 °C hysteresis, while case shutdown activates at T_CSD = 130 °C. Fault reporting is implemented via two dedicated current-source diagnostic pins-FLT1 for thermal events and FLT2 for overload-with blanking time of 200–470 µs and clamp voltage of 6.8 V.

Key Specifications

Parameter	Value and Actual Design Meaning
R_DS(on)	≤25 mΩ at T_J = 125 °C - enables 2.4 A continuous output with low conduction loss and minimal self-heating
V_CC Range	8 V to 60 V - supports wide industrial supply rails including 24 V and 48 V systems without external regulation
IPKH / IPKL	15.4 A / 8.0 A - dual activation thresholds allow safe inrush handling for bulbs while maintaining stable steady-state current limiting
V_DEMAG	V_CC−72.5 V typical - fast active clamp dissipates inductive energy without external flyback diodes
T_JSD / T_CSD	170 °C / 130 °C - independent junction and case thermal shutdown prevents latch-up and ensures system-level thermal safety
FLT Pin Type	Current-source (−4.0 mA fault sink) - directly interfaces with microcontroller GPIOs without pull-up resistors
UVLO Thresholds	V_UVON = 6.9 V, V_UVOFF = 6.5 V - tight hysteresis (0.4 V) prevents oscillation during brown-out conditions

Pinout & Package

IPS1025HQ is available in two thermally optimized packages: PowerSSO-24 (exposed pad, R_th(JC) = 0.7 °C/W) and VFQFPN-48L (8×6×0.9 mm, R_th(JC) = 1.0 °C/W). Both support high-power dissipation and PCB-level thermal management via exposed thermal pads.

Pin/Terminal	Circuit Role	Design Meaning
VCC	Supply input	Accepts 8–60 V; includes internal clamp (70.0 V typical) and UVLO circuitry
OUT	Power stage output	High-side switched output; multiple pins (PSSO24: 5–20; VFQFPN: 17–24 & 35–42) must be shorted on PCB
IN	Digital input control	CMOS-compatible (V_IH ≥ 2.2 V); 0.4 V hysteresis prevents noise-induced switching
GND	Reference ground	Device return path; GND disconnection detection triggers automatic channel disable
FLT1	Thermal fault indicator	Current-source output activated during junction or case over-temperature events
FLT2	Overload fault indicator	Current-source output activated when output current exceeds IPK thresholds
IPD	Protection mode selector	Configures dual/single threshold mode via capacitor (CPD) or resistor (10 kΩ/220 kΩ) to IN/GND

Key Features

Feature	Design Value
Smart capacitive load driving	Configurable IPKH/IPKL thresholds with programmable DPK timing enable safe lamp pre-heat and hold without external timers
Fast inductive demagnetization	V_DEMAG = V_CC−72.5 V clamping reduces decay time and eliminates need for external snubbers or freewheeling diodes
Dual thermal protection	Independent junction (T_JSD = 170 °C) and case (T_CSD = 130 °C) sensors prevent thermal runaway under sustained overload
Ground disconnection detection	ILGND ≤ 0.5 mA leakage during GND loss ensures fail-safe shutdown without external monitoring circuitry
IEC-compliant EMC robustness	Designed to meet IEC 61000-4-2 (ESD ±8 kV contact), -4-4 (EFT 4 kV), and -4-5 (surge 2 kV line-earth)

Applications

Programmable Logic Control (PLC) Output Modules

Vending Machine Load Drivers

Use Scenario: Driving solenoids, valves, and indicator lamps in modular PLC backplanes with 24 V DC power rails.

IC Role / Device Role / Timing Role: High-side switch providing isolated load control, fault reporting, and thermal resilience in DIN-rail mounted controllers.

Use Value: Dual-threshold current limiting prevents nuisance tripping during solenoid coil inrush while maintaining precise steady-state current control.

Use Scenario: Controlling coin acceptors, dispensing motors, and LED signage in unattended vending units operating across temperature extremes.

IC Role / Device Role / Timing Role: Robust load interface with built-in GND disconnection and V_CC dropout protection for field-replaceable modules.

Use Value: Active clamp and fast demagnetization eliminate external flyback components, reducing BOM count and board space in compact enclosures.

Industrial PC Peripheral I/O

Numerical Control Machine Axis Interlocks

Use Scenario: Managing opto-isolated I/O expansion cards for IPCs used in factory automation and test equipment.

IC Role / Device Role / Timing Role: High-side driver with diagnostic FLT pins enabling real-time fault logging and predictive maintenance alerts.

Use Value: FLT1/FLT2 current-source outputs simplify microcontroller interface-no external pull-ups required for reliable fault signaling.

Use Scenario: Enabling/disabling hydraulic or pneumatic actuators in CNC machine tool safety interlock circuits.

IC Role / Device Role / Timing Role: Fail-safe high-side switch with case-overtemperature shutdown ensuring thermal integrity during extended machining cycles.

Use Value: Independent case temperature sensor (T_CSD = 130 °C) provides early warning before junction thermal shutdown, preserving process continuity.

Equivalent & Alternatives

The following parts are listed as comparable options for similar high-side switch applications.

Alternative Part	Technical Difference	Application Difference	Selection Advice
IPS1025H	Same die, PowerSSO-24 only; no VFQFPN-48L option; identical electrical specs except R_th(JC) = 0.7 °C/W fixed	Limited to lower-power thermal profiles due to absence of VFQFPN-48L's superior heat spreading	Select when board layout constraints favor PowerSSO-24 and peak power dissipation remains below 3.5 W
IPS2050H	Higher R_DS(on) (≤40 mΩ), single-threshold overload (IPK = 10 A), no case temperature sensing, no IPD pin	Lacks smart capacitive load handling and dual thermal protection; simpler configuration but reduced diagnostic granularity	Choose for cost-sensitive designs where dual-threshold control and case-level thermal monitoring are not required

Compared with IPS1025H, IPS1025HQ adds VFQFPN-48L packaging for higher thermal performance; versus IPS2050H, it delivers enhanced diagnostics, dual thermal sensing, and programmable inrush management-critical for mission-critical industrial loads.

Availability

IPS1025HQ is available at Aetrix Electronics and suitable for programmable logic control, vending machine load management, and industrial PC peripheral I/O requiring stable component supply, long-term lifecycle assurance, and traceable sourcing.

Supply support for IPS1025HQ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, delivering intelligent power, analog, MEMS, and microcontroller solutions for industrial, automotive, and consumer markets.

The IPS1025 family belongs to ST's high-side switch product line, engineered specifically for industrial load control with integrated diagnostics, robust EMC immunity, and fail-safe thermal management in harsh environments.

FAQ

What is the maximum continuous output current rating for IPS1025HQ?

The IPS1025HQ supports up to 2.4 A continuous output current at T_J ≤ 125 °C, enabled by its low R_DS(on) of ≤25 mΩ. This rating assumes proper PCB copper area, thermal vias, and ambient conditions per the VFQFPN-48L or PowerSSO-24 thermal data (R_th(JC) = 1.0 °C/W or 0.7 °C/W respectively). Derating applies above 85 °C ambient.

How does the IPD pin configure overload protection modes?

The IPD pin selects between three overload configurations: connecting to GND via a capacitor (470 pF–470 nF) enables dual-threshold mode (IPKH/ILIMH then IPKL/ILIML); a 220 kΩ resistor to IN forces single low-threshold mode (IPKL only); a 10 kΩ resistor to GND enables single high-threshold mode (IPKH only). Floating IPD defaults to 1 µs IPKH duration.

Can IPS1025HQ drive inductive loads without external components?

Yes-IPS1025HQ integrates active clamp circuitry that pulls OUT to V_CC−V_DEMAG (V_CC−72.5 V typical) during turn-off, enabling fast demagnetization of inductive loads without external flyback diodes or snubbers. This reduces BOM cost and improves reliability in motor and solenoid applications.

What fault conditions activate FLT1 versus FLT2?

FLT1 activates exclusively for thermal faults: junction over-temperature (T_J > 170 °C) or case over-temperature (T_C > 130 °C). FLT2 activates only for overload events-when output current exceeds IPKH or IPKL thresholds. Both pins operate as current sources (−4.0 mA typical sink) and require no external pull-up resistors.

IPS1025HQ Specifications

Product attributes: Attribute value

Manufacturer:: STMicroelectronics

Package/Case:: 48-VFQFN Exposed Pad

Series:: -

Packaging:: Tape & Reel (TR)

Product Status:: Active

Switch Type:: General Purpose

Number of Outputs:: 1

Ratio - Input:Output:: 1:1

Output Configuration:: High Side

Output Type:: N-Channel

Interface:: Logic

Voltage - Load:: -

Voltage - Supply (Vcc/Vdd):: 8V ~ 60V

Current - Output (Max):: 2.4A

Rds On (Typ):: 12mOhm

Input Type:: Non-Inverting

Features:: -

Fault Protection:: Current Limiting (Fixed), Over Load, Over Temperature, Reverse Current, Short Circuit, UVLO

Operating Temperature:: -40°C ~ 150°C

Grade:: -

Qualification:: -

Mounting Type:: Surface Mount

Supplier Device Package:: 48-QFN (8x6)

IPS1025HQ FAQ

1.How can I place an order for IPS1025HQ through Aetrix?

Please submit a Request for Quotation (RFQ) for IPS1025HQ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.

2.Are the price and stock information for IPS1025HQ reliable?

The price and inventory of IPS1025HQ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for IPS1025HQ is usually 5 days.

3.What payment methods are accepted for IPS1025HQ?

We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for IPS1025HQ transactions.

Note: Certain payment methods may incur a processing fee.

4.How is shipping managed for IPS1025HQ?

IPS1025HQ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.

Once your IPS1025HQ order is processed, you will receive an email with the shipment details and tracking number.

Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.

5.How can I obtain technical support or documentation for IPS1025HQ?

For technical support, including IPS1025HQ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your IPS1025HQ requirements.

6.How does Aetrix verify that IPS1025HQ is sourced from the original manufacturer or authorized distributors?

All IPS1025HQ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that IPS1025HQ meets industry standards.

7.What is the process for return or replacement of IPS1025HQ?

All IPS1025HQ units undergo pre-shipment inspection (PSI). If there is an issue with IPS1025HQ, returns or replacements are accepted under the following conditions:

1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.

2.The issue is reported within 90 days of delivery.

3.The IPS1025HQ part is unused and in its original packaging.

Return procedure for IPS1025HQ:

1.Submit a request within 90 days.

2.Obtain a Return Material Authorization (RMA) from Aetrix.

Tech Hub

2026-09-03 Logic Level Shifter: How to Connect 3.3V and 5V Logic Safely

A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.

2026-09-03 74HC595 vs TPIC6B595: Output Drive, Pinout, Current, and Load Selection

The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…

2026-09-01 74HC595 Pinout, Timing, Output Current, and Applications

The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…

2026-09-01 Latch vs Flip-Flop: Timing, Differences and Design Choices

A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…

2026-08-30 D Latch Circuit: Truth Table, Timing, ICs and Applications

A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …

2026-08-28 SR Latch Explained: NOR and NAND Circuits, Truth Tables, and Applications

An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…

2026-08-27 Latch Circuit: SR and D Latches, Truth Tables, Timing, and Applications

Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…

2026-08-21 What Is an LED Driver? Types, Circuits, Dimming, and Selection

An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…

2026-08-18 Operational Amplifier (Op Amp): Basics, Configurations, Feedback and Applications

Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…

2026-08-14 Jumper Cables: How to Use, Connect and Choose Them Safely

Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…