Infineon Technologies IR3563BMTRPBF

Overview

IR3563BMTRPBF from International Rectifier is a Single-output digital multiphase buck controller for high-current voltage-regulator applications used to control high-current multiphase buck regulators. It is supplied in the 48-VFQFN Exposed Pad package and is intended for platform rails that require phase management, telemetry, current balancing, and digitally configurable regulation behavior.

For engineers reviewing the IR3563BMTRPBF datasheet, IR3563BMTRPBF pinout, IR3563BMTRPBF application, or IR3563BMTRPBF equivalent, this device is commonly used in cpu and gpu voltage regulators, memory and asic power rails, motherboard and overclocking platforms, and vr controller replacement designs. The controller supports up to 8 phases, enabling current sharing and reduced ripple in high-current VR designs. Its switching-frequency range is 200 kHz to 2 MHz per phase, allowing efficiency and transient-response optimization. This makes IR3563BMTRPBF relevant for CPU, GPU, memory, ASIC, and motherboard voltage-regulator designs where a single controller coordinates several external phase legs.

Technical Context

In a multiphase VR design, IR3563BMTRPBF does not carry the main output current itself; it supervises external power stages or phase drivers. Layout priorities are therefore PWM routing, current-sense integrity, remote-sense accuracy, and clean digital configuration lines.

Phase allocation, switching frequency, load-line configuration, protection thresholds, and digital interface settings define the electrical behavior of the final regulator. These items must be matched to the processor or platform specification rather than copied from a generic buck design.

For replacement, the firmware or board configuration is as important as the package. A controller with a similar phase count may still be incompatible if VID behavior, register programming, pinout, or telemetry interface differs from the IR3563BMTRPBF technical documentation.

Key Specifications

Pinout & Package

The IR3563BMTRPBF pinout must be reviewed from the exact package drawing because terminal function, thermal path, and mechanical footprint are linked in this product family. 48-VFQFN Exposed Pad package information and Bulk packaging for this line.

For PCB design, use the package drawing and confirm copper area, soldering method, creepage or clearance where applicable, and the final orderable suffix before layout or replacement approval. leadless power package requiring exposed-pad soldering, thermal vias, and compact high-current layout.

Key Features

• Single-output digital multiphase buck controller for high-current voltage-regulator applications for high-current digitally controlled voltage-regulator systems.
• Supports multiphase current sharing and transient-response optimization.
• Digital configuration and telemetry functions support platform-specific power management.
• Designed to coordinate external power stages rather than switch the full current internally.
• Package and pinout must be checked against board-level VR routing.
• Replacement requires firmware, register, VID, and phase-assignment compatibility review.

Applications

Equivalent & Alternatives

When evaluating IR3563BMTRPBF equivalent devices, engineers should compare only specific orderable alternatives and should verify package footprint, pinout, electrical ratings, thermal data, qualification status, and suffix or packing requirements before substitution.

Compared with related alternatives, IR3563BMTRPBF should remain the preferred sourcing reference when the existing BOM, PCB footprint, and qualification documentation require the exact International Rectifier orderable device.

Quality

IR3563BMTRPBF should be sourced as original International Rectifier / Infineon inventory through traceable and controlled supply channels. Quality verification may include package inspection, top-mark validation, label and lot review, solderability inspection, moisture-sensitivity handling review, and electrical screening according to the target production requirement.

Because IR3563BMTRPBF is used in digital multiphase voltage-regulator designs, final validation should include the actual PCB footprint, thermal path, electrical stress, operating temperature, and fault-condition behavior. Traceable sourcing helps reduce counterfeit risk and supports repeatable performance in production, repair, and maintenance programs.

Availability

IR3563BMTRPBF available at Aetrix Electronics and suitable for digital multiphase voltage-regulator designs requiring stable component supply, package matching, and controlled replacement planning.

Supply support may include scheduled delivery planning, volume procurement support, BOM continuity assistance, traceable sourcing management, and long-term availability support for OEM manufacturers, repair programs, and electronics production teams.

For production or repair deployment, confirming package type, orderable suffix, lifecycle status, environmental requirement, electrical rating, thermal condition, and sourcing continuity helps reduce procurement risk and improve manufacturing stability.

Manufacturer

International Rectifier was a semiconductor manufacturer known for power MOSFETs, IGBTs, gate drivers, power-management ICs, intelligent power switches, photovoltaic relays, and power modules. International Rectifier products became part of Infineon Technologies' power semiconductor portfolio after the acquisition of International Rectifier.

The IR3563BMTRPBF ordering line should be reviewed with the relevant International Rectifier legacy technical documentation and Infineon supply-chain references where available. This is especially important for legacy MOSFETs, IRAM modules, PV relay products, and automotive AUIR power devices.

FAQ

What is IR3563BMTRPBF used for?

IR3563BMTRPBF is used in digital multiphase voltage-regulator designs. The exact application depends on the technical documentation electrical ratings, package, pinout, and thermal capability.

Where can I find the IR3563BMTRPBF technical documentation?

The IR3563BMTRPBF technical documentation should be obtained from International Rectifier / Infineon documentation or an authorized technical documentation source. It should be used to confirm ratings, package information, pinout, thermal data, and test conditions.

What should be considered in IR3563BMTRPBF pinout design?

Pinout design should confirm the package drawing, terminal functions, thermal path, high-current routing or isolation spacing, and whether the orderable suffix changes package or packing details.

Can IR3563BMTRPBF be used as a direct replacement?

IR3563BMTRPBF can be used as a direct replacement only when the package footprint, pinout, electrical ratings, thermal behavior, and qualification status match the original design.

What are common IR3563BMTRPBF equivalent solutions?

Equivalent solutions should be limited to specific orderable devices with verified technical documents. Suffix variants may differ in package, reel orientation, lead finish, qualification, or manufacturing status.