My Inquiry
My Account
Renesas ISL54063IRTZ-T
- Part No.:
- ISL54063IRTZ-T
- Manufacturer:
- Renesas
- Package:
- 10-VFDFN Exposed Pad
- Datasheet:
-
ISL54063IRTZ-T.pdf
- Description:
- IC SW SPST-NOX2 550MOHM 10TDFN
- Quantity:
- Payment:
- Shipping:
Inventory:3,411
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ISL54063IRTZ-T from Intersil is a dual SPST analog switch with normally open (NO) configuration, designed for low-distortion audio signal routing in battery-powered portable systems. It delivers 0.55 Ω typical ON-resistance at +4.5V, supports negative signal swing down to 6.5V below V+, and features integrated click-and-pop elimination circuitry for direct speaker interface in MP3 players and mobile handsets.
For engineers reviewing the ISL54063IRTZ-T datasheet, ISL54063IRTZ-T pinout, ISL54063IRTZ-T application, or ISL54063IRTZ-T equivalent, key selection criteria include sub-ohm rON matching (≤30 mΩ), guaranteed break-before-make timing, 1.8V logic compatibility, and validated performance across 1.8V–6.5V single-supply operation with audio-grade THD+N (0.02% @ 32 Ω).
Technical Context
The ISL54063IRTZ-T implements a dual-channel, bidirectional CMOS analog switch architecture with independent digital control inputs (IN1/IN2) driving two normally open switches (NO1/NO2 ↔ COM1/COM2). Its internal level-shifter enables 1.8V logic compatibility across supply voltages up to +6.5V while maintaining rail-to-rail analog signal handling - including signals extending 6.5V below V+.
Click-and-pop suppression is achieved via controlled turn-on/turn-off sequencing of internal gate drivers and charge-injection minimization (≤200 pC), verified under 1.8V–4.3V supplies. The device guarantees break-before-make switching to prevent momentary shorting between channels during state transitions.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| ON-resistance (rON) | 0.55 Ω typ @ V+ = +4.5V, 100 mA - ensures minimal insertion loss & voltage drop in audio paths |
| rON matching | ≤30 mΩ max - maintains channel-to-channel signal balance in stereo applications |
| Turn-on time (tON) | 43 ns typ @ V+ = +4.3V - enables fast switching without audible artifacts in dynamic audio routing |
| Negative signal swing | Up to 6.5V below V+ - supports AC-coupled audio signals with ground-referenced biasing |
| THD+N | 0.02% @ 20Hz–20kHz, 32 Ω load - meets high-fidelity audio requirements for portable playback |
| Supply range | +1.8V to +6.5V single supply - compatible with Li-ion, Li-poly, and regulated 3.3V/5V rails |
| Logic compatibility | 1.8V CMOS input thresholds (VINH ≥ 1.4V, VINL ≤ 0.5V @ 3V supply) - interfaces directly with baseband processors and PMICs |
Pinout & Package
ISL54063IRTZ-T is packaged in a 10-lead 3mm × 3mm TDFN (Pb-free, RoHS-compliant) with exposed thermal pad. Pin 1 is marked by a dot; the package requires GND connection to the underside paddle for optimal thermal performance and EMI suppression.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| V+ | Positive power supply | Single supply rail (+1.8V to +6.5V); must be decoupled with 0.1 µF capacitor near pin |
| GND | Ground reference | Return path for analog and digital circuits; connects to exposed paddle for thermal management |
| IN1, IN2 | Digital control inputs | Independent logic inputs controlling NO1/COM1 and NO2/COM2; 1.8V-compatible thresholds |
| NO1, NO2 | Normally open switch terminals | Open-circuit when INx = 0; connect to COMx only when INx = 1 (logic high) |
| COM1, COM2 | Analog common nodes | Signal I/O ports shared between NOx and NCx; support bidirectional signal flow |
| N.C. | No-connect terminal | Unbonded pin; must remain unconnected per datasheet (pin 4 and pin 9 in TDFN layout) |
Key Features
| Feature | Design Value |
|---|---|
| Audio click-and-pop elimination | Integrated circuitry suppresses transient noise during switching - eliminates need for external mute control in speaker paths |
| Sub-ohm rON flatness | 0.35 Ω max variation over full signal range - preserves linearity in high-fidelity audio and precision sensor multiplexing |
| Guaranteed break-before-make | Verified timing margin prevents channel shorting - critical for safe switching between multiple audio sources |
| Low leakage current | ≤0.7 µA max ICOM(ON) @ full temperature range - minimizes DC offset drift in sensitive analog front-ends |
| ESD robustness | >6 kV HBM rating - withstands handling and system-level ESD events without latch-up or parametric shift |
Applications
| Mobile Audio Routing | Stereo Headphone Switching |
|---|---|
Use Scenario: Dynamic selection between earpiece, loudspeaker, and headset outputs in cellular handsets. IC Role / Device Role / Timing Role: Dual SPST NO switch enabling concurrent or exclusive audio path activation with zero-crossing timing control. Use Value: Eliminates mechanical relays and external muting logic; click-and-pop suppression ensures silent transitions during call handover. |
Use Scenario: Sharing a single DAC output between left/right headphone channels and mono speaker in portable media players. IC Role / Device Role / Timing Role: Low-rON, matched dual switch providing symmetrical signal integrity for L/R stereo paths. Use Value: rON matching ≤30 mΩ prevents channel imbalance; 0.02% THD+N preserves audio fidelity at 32 Ω loads. |
| Portable Medical Sensors | Battery-Powered Test Equipment |
Use Scenario: Multiplexing biopotential signals (ECG, EEG) with AC coupling and negative swing capability. IC Role / Device Role / Timing Role: Analog switch supporting signals down to −3.8V (at V+ = +2.7V) without clipping or distortion. Use Value: 6.5V negative swing headroom enables true bipolar signal handling in ultra-low-voltage medical wearables. |
Use Scenario: Signal path selection in handheld DMMs and oscilloscope probes requiring wide dynamic range. IC Role / Device Role / Timing Role: High-bandwidth (60 MHz −3dB), low-charge-injection switch for precision measurement front-ends. Use Value: 200 pC max charge injection prevents baseline shift in high-impedance sensor measurements. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual SPST analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TSM1022IDCNT | Higher rON (1.2 Ω typ @ 3.3V), no integrated click/pop suppression, 1.2V logic compatible | Lacks audio-optimized switching; suitable for general-purpose multiplexing but not speaker-level routing | Select when cost sensitivity outweighs audio quality; verify external mute circuitry required |
| MAX4677EUA+ | 0.8 Ω rON @ 5V, ±15V signal range, no negative swing below ground, 3.3V logic only | Designed for industrial signal conditioning, not portable audio; requires dual supply for full-range operation | Prefer for wide-voltage industrial muxing where ground-referenced negative swing is unnecessary |
Compared with TSM1022IDCNT and MAX4677EUA+, the ISL54063IRTZ-T uniquely combines sub-ohm rON, 6.5V negative swing, and embedded click/pop elimination - making it the only qualified option for space-constrained, battery-powered audio routing without external compensation.
Availability
ISL54063IRTZ-T is available at Aetrix Electronics and suitable for mobile handset design, portable medical instrumentation, and handheld test equipment requiring stable component supply, long-term lifecycle assurance, and RoHS-compliant packaging.
Supply support for ISL54063IRTZ-T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Intersil Corporation (now part of Renesas Electronics) is a U.S.-based semiconductor company specializing in precision analog, power management, and interface ICs for high-reliability applications.
The ISL54063IRTZ-T belongs to Intersil's low-voltage analog switch product line, engineered specifically for audio signal integrity and ultra-low-power operation in portable consumer electronics.
FAQ
What is the maximum allowable analog signal voltage range for ISL54063IRTZ-T when operating at +3.3V supply?
At V+ = +3.3V, the ISL54063IRTZ-T supports an analog signal range from −3.2V to +3.3V (6.5V below V+ to V+). This is confirmed in the Absolute Maximum Ratings table and Figure 14 of the FN6582 datasheet. Operation outside this range risks forward-biasing internal ESD diodes and exceeding the ±300mA continuous current limit on COM/NO pins.
Does ISL54063IRTZ-T require external decoupling capacitors, and if so, what value is recommended?
Yes, ISL54063IRTZ-T requires a 0.1 µF ceramic capacitor placed as close as possible between V+ and GND pins. This is explicitly specified in the Pin Descriptions section (Page 3) and Detailed Description (Page 10) of the FN6582 datasheet to stabilize internal level shifters and suppress high-frequency noise that could degrade switching performance or increase THD+N.
Can ISL54063IRTZ-T be used in a normally closed (NC) configuration?
No - ISL54063IRTZ-T is a committed normally open (NO) dual SPST switch. Its internal topology connects NOx to COMx only when INx = logic high. For NC functionality, the pin-compatible ISL54064IRTZ-T must be used, as stated in the Product Overview (Page 1) and Truth Table (Page 3) of FN6582.
What is the guaranteed break-before-make interval for ISL54063IRTZ-T, and how is it implemented?
The ISL54063IRTZ-T guarantees break-before-make timing through internal gate-driver sequencing - verified in characterization but not specified as a minimum nanosecond value. Per the Detailed Description (Page 9), this architecture prevents simultaneous conduction between channels during logic transitions, eliminating risk of short-circuit current in multi-source audio routing.
Is ISL54063IRTZ-T compatible with 1.2V logic inputs?
No - ISL54063IRTZ-T requires minimum logic high input voltage (VINH) of 1.4V at 3V supply (Page 5), scaling to 1.0V at 1.8V supply (Page 7). A 1.2V logic high falls below the guaranteed recognition threshold across all operating conditions and may result in undefined switching behavior or increased supply current.
ISL54063IRTZ-T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 2
- On-State Resistance (Max):
- 550mOhm (Typ)
- Channel-to-Channel Matching (ΔRon):
- 15mOhm
- Voltage - Supply, Single (V+):
- 1.8V ~ 6.5V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 35ns, 10ns
- -3db Bandwidth:
- 60MHz
- Charge Injection:
- 170pC
- Channel Capacitance (CS(off), CD(off)):
- 36pF
- Current - Leakage (IS(off)) (Max):
- -
- Crosstalk:
- -75dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 10-TDFN (3x3)
ISL54063IRTZ-T FAQ
1.How can I place an order for ISL54063IRTZ-T through Aetrix?
Please submit a Request for Quotation (RFQ) for ISL54063IRTZ-T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ISL54063IRTZ-T reliable?
The price and inventory of ISL54063IRTZ-T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ISL54063IRTZ-T is usually 5 days.
3.What payment methods are accepted for ISL54063IRTZ-T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ISL54063IRTZ-T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ISL54063IRTZ-T?
ISL54063IRTZ-T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ISL54063IRTZ-T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ISL54063IRTZ-T?
For technical support, including ISL54063IRTZ-T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ISL54063IRTZ-T requirements.
6.How does Aetrix verify that ISL54063IRTZ-T is sourced from the original manufacturer or authorized distributors?
All ISL54063IRTZ-T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ISL54063IRTZ-T meets industry standards.
7.What is the process for return or replacement of ISL54063IRTZ-T?
All ISL54063IRTZ-T units undergo pre-shipment inspection (PSI). If there is an issue with ISL54063IRTZ-T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ISL54063IRTZ-T part is unused and in its original packaging.
Return procedure for ISL54063IRTZ-T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ISL54063IRTZ-T Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
