My Inquiry
My Account
Renesas ISL54064IRTZ-T
- Part No.:
- ISL54064IRTZ-T
- Manufacturer:
- Renesas
- Package:
- 10-VFDFN Exposed Pad
- Datasheet:
-
ISL54064IRTZ-T.pdf
- Description:
- IC SW SPST-NCX2 550MOHM 10TDFN
- Quantity:
- Payment:
- Shipping:
Inventory:4,557
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ISL54064IRTZ-T from Intersil is a dual SPST analog switch with normally closed (NC) configuration, designed for low-distortion audio signal routing in battery-powered portable systems. It delivers 0.65 Ω typical ON-resistance at 4.3 V supply, −6.5 V negative signal swing capability, and integrated click-and-pop elimination circuitry - enabling clean speaker switching in mobile phones and MP3 players.
For engineers reviewing the ISL54064IRTZ-T datasheet, ISL54064IRTZ-T pinout, ISL54064IRTZ-T application, or ISL54064IRTZ-T equivalent, key selection criteria include guaranteed break-before-make timing, rON matching ≤30 mΩ, THD+N of 0.02% at 32 Ω, and compatibility with 1.8 V logic on a +1.8 V to +6.5 V single supply.
Technical Context
The ISL54064IRTZ-T implements a dual-channel, bidirectional CMOS analog switch architecture with independent digital control inputs (IN1/IN2) driving two normally closed (NC1/NC2) switches referenced to common pins (COM1/COM2). Its internal level-shifting logic ensures 1.8 V logic compatibility across the full 1.8–6.5 V supply range.
Integrated click-and-pop suppression operates via controlled voltage ramping at switch transitions, verified per Figure 7B test circuit with 220 µF capacitors and 200 ms delay. The device guarantees break-before-make operation and supports analog signals from (V+ − 6.5 V) to V+, enabling true rail-to-rail and sub-ground signal handling.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Switch Type | Dual SPST, normally closed (NC) configuration - each channel conducts when INx = logic low (≤0.5 V) |
| ON-Resistance (rON) | 0.65 Ω typical at V+ = 4.3 V - enables <0.01 dB insertion loss in 32 Ω audio paths |
| Signal Swing Range | −6.5 V below V+ to V+ - supports ±3.8 V analog swing at 2.7 V supply, critical for headphone DAC outputs |
| THD+N | 0.02% at 20 Hz–20 kHz, 32 Ω load - meets high-fidelity audio requirements without external filtering |
| Switching Speeds | tON = 43 ns / tOFF = 23 ns at V+ = 4.3 V - ensures minimal transient artifacts during fast channel selection |
| Power Supply | +1.8 V to +6.5 V single supply - eliminates need for dual-rail supplies in portable designs |
| Logic Compatibility | 1.8 V CMOS input thresholds (VINH ≥ 1.4 V, VINL ≤ 0.5 V at 3 V supply) - interoperable with baseband processors and PMICs |
Pinout & Package
ISL54064IRTZ-T is packaged in a 10-lead 3 mm × 3 mm TDFN (Pb-free, RoHS-compliant) with exposed thermal pad tied to GND. Pin 1 is top-left corner marked by dot or beveled edge.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| V+ | Positive power supply | Accepts +1.8 V to +6.5 V; requires local 0.1 µF decoupling to GND for stable switching performance |
| GND | Ground reference | Return path for analog and digital domains; must connect to exposed paddle for thermal and EMI integrity |
| IN1, IN2 | Digital control inputs | Active-low logic: NCx connects to COMx when INx = logic low (≤0.5 V); no pull-up required |
| COM1, COM2 | Analog common terminals | Signal hub for each switch; bidirectional current path up to ±300 mA continuous |
| NC1, NC2 | Normally closed analog terminals | Conduct to COMx when INx = low; open when INx = high - used for default-path audio routing |
| N.C. | No-connect terminal | Internally unconnected; must remain floating - not for grounding or bypassing |
Key Features
| Feature | Design Value |
|---|---|
| Negative signal swing support | Enables analog signals down to (V+ − 6.5 V), e.g., −3.8 V at 2.7 V supply - essential for AC-coupled audio interfaces |
| Click-and-pop elimination | On-chip circuitry reduces audible transients during speaker activation/deactivation - eliminates need for external mute sequencing |
| rON matching & flatness | ≤30 mΩ channel-to-channel rON mismatch and ≤0.5 Ω rON flatness over full signal range - preserves stereo balance and linearity |
| Guaranteed break-before-make | Prevents momentary shorting between channels during state transitions - protects downstream amplifiers and DACs |
| Low leakage & high isolation | COM ON leakage ≤0.7 µA and OFF-isolation ≥60 dB at 100 kHz - minimizes crosstalk and DC offset in multi-channel systems |
Applications
| Mobile Audio Routing | Portable Medical Sensors |
|---|---|
Use Scenario: Switching between earpiece, loudspeaker, and headset outputs in smartphones under dynamic power management. IC Role / Device Role / Timing Role: Dual NC switch provides default-conductive path to speaker; INx controls mute state with sub-50 ns timing precision. Use Value: Eliminates mechanical relay wear and click noise during call handover, while supporting 1.8 V baseband logic without level shifters. |
Use Scenario: Multiplexing biopotential signals (ECG, EEG) into a single ADC channel in handheld diagnostic devices. IC Role / Device Role / Timing Role: NC configuration maintains default sensor connection; fast tOFF (23 ns) enables precise sampling window control. Use Value: Sub-ohm rON and <0.02% THD+N preserve microvolt-level signal fidelity; negative swing handles electrode DC offsets. |
| USB-C Audio Adapters | Wearable Audio Amplifiers |
Use Scenario: Managing analog audio paths (TRRS detection, mic/speaker routing) in compact USB-C dongles with tight board space. IC Role / Device Role / Timing Role: Dual NC switch routes default audio path; tiny 3 mm × 3 mm TDFN footprint saves >40% area vs SOIC alternatives. Use Value: Integrated click-and-pop suppression removes need for external RC mute networks, reducing BOM count and PCB layers. |
Use Scenario: Enabling/disabling speaker drivers in hearables to extend battery life during standby without audible pop. IC Role / Device Role / Timing Role: NC switch keeps driver enabled by default; INx asserts high to disconnect during sleep mode. Use Value: 20 nA quiescent current at 1.8 V supply minimizes system standby drain; −6.5 V swing accommodates Class-D amplifier output rails. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Texas Instruments TS5A23157DCUR | SPST NO configuration (not NC); 0.9 Ω rON at 3 V; no integrated click/pop suppression | Requires external mute sequencing for speaker switching; suitable for non-audio signal routing only | Select when NC functionality is unnecessary and cost is primary; verify external pop mitigation is implemented |
| Analog Devices ADG884BRMZ | Dual SPST NO/NC configurable; 0.55 Ω rON at 3 V; no dedicated click/pop circuitry | Supports flexible topology but lacks on-chip audio transient suppression - demands careful layout and timing control | Choose for mixed-signal multiplexing where NC/NO flexibility matters more than autonomous pop elimination |
Compared with TS5A23157DCUR and ADG884BRMZ, the ISL54064IRTZ-T uniquely combines NC topology, sub-ohm rON, and hardware-based click-and-pop elimination - reducing firmware complexity and PCB area in portable audio systems.
Availability
ISL54064IRTZ-T is available at Aetrix Electronics and suitable for mobile audio routing, portable medical sensors, and USB-C audio adapters requiring stable component supply, long-term lifecycle support, and RoHS-compliant packaging.
Supply support for ISL54064IRTZ-T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Intersil Corporation (now part of Renesas Electronics) is a semiconductor manufacturer specializing in precision analog, power management, and interface ICs for industrial, computing, and consumer applications.
The ISL54064IRTZ-T belongs to Intersil's low-voltage analog switch product line, engineered specifically for high-fidelity, low-power audio signal routing in space-constrained portable electronics.
FAQ
What is the default state of the ISL54064IRTZ-T switches?
The ISL54064IRTZ-T features two normally closed (NC) SPST switches. When IN1 and IN2 are at logic low (≤0.5 V), NC1 and NC2 conduct to COM1 and COM2 respectively. This default-conductive state ensures fail-safe audio path continuity in portable devices - a key distinction from the NO-configured ISL54063. The ISL54064IRTZ-T remains in this NC state until actively disabled by a logic-high control signal.
Does the ISL54064IRTZ-T require external components for click-and-pop suppression?
No. The ISL54064IRTZ-T integrates dedicated click-and-pop elimination circuitry that operates autonomously using internal timing and voltage ramping - as validated in Figure 7B of the FN6582 datasheet. Unlike discrete solutions requiring external RC networks or processor-driven mute sequences, the ISL54064IRTZ-T achieves clean speaker switching with no additional components, reducing BOM count and layout complexity.
Can the ISL54064IRTZ-T operate with a 1.8 V supply and still drive audio loads?
Yes. The ISL54064IRTZ-T is fully specified down to +1.8 V supply, delivering 1.87 Ω typical rON and 0.04% THD+N at 20 Hz–20 kHz into 32 Ω. While rON increases versus higher supplies, its 1.8 V logic compatibility and sub-ground signal swing (down to −4.7 V) make it viable for ultra-low-power headphone amplifiers and wearables where supply headroom is constrained.
What is the maximum analog signal voltage the ISL54064IRTZ-T can handle?
The ISL54064IRTZ-T supports analog signals from (V+ − 6.5 V) to V+. At V+ = 5 V, this translates to −1.5 V to +5 V; at V+ = 2.7 V, it spans −3.8 V to +2.7 V. This extended negative swing is achieved via internal charge-pump-assisted biasing and is critical for interfacing with AC-coupled audio codecs and op-amp outputs without external level-shifting circuitry.
Is the ISL54064IRTZ-T pin-compatible with other devices in the ISL5406x family?
Yes - the ISL54064IRTZ-T shares identical 10-lead TDFN pinout and package dimensions with the ISL54063IRTZ-T, differing only in internal switch configuration (NC vs NO). This allows direct PCB reuse across designs requiring either default-on or default-off behavior, provided firmware logic is updated to match the inverted control polarity of the NC topology.
ISL54064IRTZ-T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 2
- On-State Resistance (Max):
- 550mOhm (Typ)
- Channel-to-Channel Matching (ΔRon):
- 15mOhm
- Voltage - Supply, Single (V+):
- 1.8V ~ 6.5V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 35ns, 10ns
- -3db Bandwidth:
- 60MHz
- Charge Injection:
- 170pC
- Channel Capacitance (CS(off), CD(off)):
- 36pF
- Current - Leakage (IS(off)) (Max):
- -
- Crosstalk:
- -75dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 10-TDFN (3x3)
ISL54064IRTZ-T FAQ
1.How can I place an order for ISL54064IRTZ-T through Aetrix?
Please submit a Request for Quotation (RFQ) for ISL54064IRTZ-T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ISL54064IRTZ-T reliable?
The price and inventory of ISL54064IRTZ-T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ISL54064IRTZ-T is usually 5 days.
3.What payment methods are accepted for ISL54064IRTZ-T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ISL54064IRTZ-T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ISL54064IRTZ-T?
ISL54064IRTZ-T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ISL54064IRTZ-T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ISL54064IRTZ-T?
For technical support, including ISL54064IRTZ-T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ISL54064IRTZ-T requirements.
6.How does Aetrix verify that ISL54064IRTZ-T is sourced from the original manufacturer or authorized distributors?
All ISL54064IRTZ-T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ISL54064IRTZ-T meets industry standards.
7.What is the process for return or replacement of ISL54064IRTZ-T?
All ISL54064IRTZ-T units undergo pre-shipment inspection (PSI). If there is an issue with ISL54064IRTZ-T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ISL54064IRTZ-T part is unused and in its original packaging.
Return procedure for ISL54064IRTZ-T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ISL54064IRTZ-T Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
