My Inquiry
My Account
Renesas ISL54500IHZ-T
- Part No.:
- ISL54500IHZ-T
- Manufacturer:
- Renesas
- Package:
- SOT-23-6
- Datasheet:
-
ISL54500IHZ-T.pdf
- Description:
- IC SWITCH SPDT X 1 5OHM 6SOT
- Quantity:
- Payment:
- Shipping:
Inventory:2,276
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ISL54500IHZ-T from Intersil is a single-pole/double-throw (SPDT) analog switch optimized for battery-powered portable equipment, featuring 5.0 Ω ON-resistance at +5 V, 22 ns turn-on time, and guaranteed break-before-make switching. It operates from a single +1.8 V to +5.5 V supply, supports 1.8 V CMOS logic compatibility at +3 V, and is housed in a 6-lead SOT-23 package.
For engineers reviewing the ISL54500IHZ-T datasheet, ISL54500IHZ-T pinout, ISL54500IHZ-T application, or ISL54500IHZ-T equivalent, this page delivers verified electrical specs, validated SOT-23 pin mapping, confirmed SPDT mux use cases in audio/video routing and cellular ASIC signal expansion, and two technically documented alternative parts with explicit functional and packaging differences.
Technical Context
The ISL54500IHZ-T implements a committed SPDT architecture with one normally open (NO) and one normally closed (NC) channel, enabling true 2:1 multiplexing without external logic. Its sub-microamp quiescent current (0.5 µA max) and rail-to-rail analog signal range (0 V to V+) support low-power, high-fidelity signal routing in space-constrained designs.
Internal level shifters translate 1.8 V–3.6 V CMOS logic inputs to full V+/GND gate drive, ensuring reliable switching across the entire supply range. Break-before-make timing (18 ns min) prevents signal shorting during state transitions, while ESD robustness (6 kV HBM) and latch-up immunity are enhanced by internal protection diodes and recommended external series resistors.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| ON-resistance (rON) | 5.0 Ω at +5 V - enables low insertion loss in 50 Ω RF/audio paths and minimizes voltage drop under 100 mA load |
| Turn-on / Turn-off time | 22 ns / 15 ns at +4.5 V - supports high-speed signal routing in digital interface muxing and test equipment |
| Supply voltage range | +1.8 V to +5.5 V - powers directly from Li-ion battery (3.0–4.2 V), 3.3 V rails, or regulated 1.8 V logic domains |
| rON matching | 46 mΩ typical - ensures balanced channel performance critical for differential or precision analog switching |
| OFF-isolation | 75 dB at 1 MHz - suppresses crosstalk between active and inactive signal paths in multi-source audio/video systems |
| ESD rating (HBM) | 6 kV - meets IEC 61000-4-2 Level 4 for handheld device front-end protection without added TVS |
| Package | 6-lead SOT-23 (MDP0038) - footprint-compatible with industry-standard discrete transistor layouts; 2.9 mm × 2.8 mm × 1.3 mm height |
Pinout & Package
ISL54500IHZ-T is packaged in a Pb-free, RoHS-compliant 6-lead SOT-23 (MDP0038) with standard gull-wing leads and 0.95 mm pitch. The package is MSL-1 rated and compatible with SnPb and Pb-free reflow profiles.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (NC) | Analog Normally Closed terminal | Connected to COM when IN = 0; used for default-path routing or fail-safe signal continuity |
| 2 (IN) | Digital control input | Accepts 1.8 V CMOS logic (0.5 V/1.4 V thresholds at +3 V); drives internal level shifter to control switch state |
| 3 (NO) | Analog Normally Open terminal | Connected to COM when IN = 1; enables on-demand signal path activation in multiplexer configurations |
| 4 (GND) | Ground reference | Return path for analog signals and digital logic; must be low-impedance to minimize noise coupling into rON |
| 5 (COM) | Analog common terminal | Shared I/O node for bidirectional signal flow; supports rail-to-rail analog voltages up to V+ |
| 6 (V+) | Positive power supply | Single supply input (+1.8 V to +5.5 V); powers internal CMOS switches and logic; requires 100 Ω series resistor for enhanced ESD/latch-up immunity |
Key Features
| Feature | Design Value |
|---|---|
| Guaranteed break-before-make | 18 ns minimum delay prevents momentary shorting between NC and NO paths during switching - essential for protecting downstream circuitry |
| rON flatness | 1.1 Ω at +4.5 V - maintains consistent signal attenuation across full analog input range (0 V to V+), reducing harmonic distortion |
| Low charge injection | 16 pC typical - minimizes voltage glitches on high-impedance nodes (e.g., ADC inputs or sensor interfaces) during switching |
| High-frequency bandwidth | 350 MHz −3 dB point - supports clean routing of video clocks, USB 1.1 data, and other high-speed baseband signals |
| 1.8 V logic compatibility | Validated at +3 V supply with VINL ≤ 0.5 V and VINH ≥ 1.4 V - enables direct interfacing with ultra-low-voltage microcontrollers and FPGAs |
Applications
| Cellular Phone Signal Expansion | Portable Audio Muxing |
|---|---|
|
Use Scenario: Expanding limited ASIC analog I/O in smartphones to support additional sensors, antennas, or audio codecs without redesigning the baseband IC. IC Role / Device Role / Timing Role: SPDT analog switch acting as a 2:1 multiplexer to route external analog signals (e.g., microphone bias, antenna diversity) into shared ASIC pins. Use Value: Reduces ASIC design risk and BOM count while maintaining signal integrity via 5.0 Ω rON and 75 dB OFF-isolation at RF frequencies. |
Use Scenario: Selecting between dual audio sources (e.g., Bluetooth headset and wired earpiece) in compact portable media players. IC Role / Device Role / Timing Role: Bidirectional analog switch managing stereo line-level signals with rail-to-rail operation and <22 ns switching to prevent audible clicks. Use Value: Enables seamless source switching with <0.12% THD at 32 Ω load and minimal crosstalk due to matched rON and low COFF (6 pF). |
| Laptop Docking Station Interface | Handheld Test Equipment Signal Routing |
|
Use Scenario: Routing HDMI, USB, or DisplayPort auxiliary channels through a compact docking station where PCB real estate is constrained. IC Role / Device Role / Timing Role: Low-capacitance SPDT switch isolating or selecting analog sideband signals (e.g., DDC, HPD) with minimal loading on high-speed lanes. Use Value: Preserves signal integrity with CCOM(ON) = 12 pF and COFF = 6 pF, supporting >350 MHz bandwidth without trace-length compensation. |
Use Scenario: Configuring signal paths in battery-powered multimeters or oscilloscope probes to select between voltage, current, or frequency measurement modes. IC Role / Device Role / Timing Role: Precision analog switch providing low-leakage (<300 nA) and low-distortion routing for DC-coupled measurement front-ends. Use Value: Ensures measurement accuracy with ±0.01% THD at 600 Ω and <13 Ω rON at 1.8 V, enabling stable readings across wide supply and temperature ranges. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar SPDT analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ISL54050IRUZ-T | Same SPDT topology but in 6-lead µTDFN (1.2 mm × 1.0 mm); 4.2 Ω rON at +4.5 V; no SOT-23 option | Better thermal resistance (θJA = 239°C/W vs. 260°C/W) and smaller footprint - preferred for ultra-dense layouts | Select ISL54050IRUZ-T when board area is critical and µTDFN assembly capability exists; not pin-compatible with ISL54500IHZ-T |
| TMUX1574DSGR | TI part in 6-lead WSON (2.0 mm × 2.0 mm); 4.5 Ω rON; 1.65–5.5 V supply; 1.8 V logic compatible | Higher ESD rating (8 kV HBM); integrated ESD protection eliminates need for external clamps; different pinout (IN/COM/NO/NC/GND/V+) | Choose TMUX1574DSGR for enhanced system-level ESD robustness and broader supply flexibility; requires PCB layout change |
Compared with ISL54500IHZ-T, ISL54050IRUZ-T offers superior thermal performance and smaller size but mandates µTDFN rework, while TMUX1574DSGR provides higher ESD immunity and wider voltage tolerance at the cost of non-interchangeable pin mapping and larger footprint.
Availability
ISL54500IHZ-T is available at Aetrix Electronics and suitable for cellular phone signal expansion, portable audio muxing, laptop docking interface, and handheld test equipment requiring stable component supply and long-term industrial availability.
Supply support for ISL54500IHZ-T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Intersil Corporation (now part of Renesas Electronics) is a U.S.-based semiconductor company specializing in precision analog, power management, and interface ICs for industrial, computing, and communications markets.
The ISL54500 product line was designed specifically for low-voltage, high-speed analog signal routing in battery-powered portable electronics, emphasizing minimal rON, fast switching, and ultra-small packaging to extend runtime and shrink form factors.
FAQ
What is the maximum analog signal voltage range supported by the ISL54500IHZ-T?
The ISL54500IHZ-T supports a rail-to-rail analog signal range from 0 V to V+, where V+ is the positive supply voltage. With V+ operating from +1.8 V to +5.5 V, the analog input/output can swing fully across that supply range - for example, 0 V to +3.3 V when powered from a 3.3 V rail. This ensures compatibility with common logic and sensor output levels without level-shifting circuitry.
Does the ISL54500IHZ-T require external components for reliable operation?
Yes - Intersil recommends adding a 100 Ω resistor in series with the V+ pin to enhance ESD and latch-up immunity during system-level transients. Additionally, Schottky diodes may be added to analog signal pins if overvoltage conditions beyond V+ or below GND cannot be avoided. The ISL54500IHZ-T itself draws only 0.5 µA typical supply current, so these external components introduce negligible impact on normal operation.
Is the ISL54500IHZ-T pin-compatible with other members of the ISL54500 family?
No - the ISL54500IHZ-T uses the 6-lead SOT-23 package (MDP0038) with a specific pinout: Pin 1 = NC, Pin 2 = IN, Pin 3 = NO, Pin 4 = GND, Pin 5 = COM, Pin 6 = V+. In contrast, the ISL54500IRUZ-T variant uses a 6-lead µTDFN package (L6.1.2x1.0A) with entirely different pin numbering and physical layout. They are functionally identical but not mechanically or electrically interchangeable without PCB redesign.
What is the guaranteed break-before-make timing specification for the ISL54500IHZ-T?
The ISL54500IHZ-T guarantees a minimum break-before-make time delay (tD) of 18 ns under full operating conditions (−40°C to +85°C, V+ = +5.5 V). This parameter is measured with RL = 50 Ω and CL = 35 pF, and ensures that the NC path fully disconnects before the NO path connects - preventing momentary shorts that could damage sensitive downstream circuitry or cause signal corruption.
Can the ISL54500IHZ-T operate reliably from a 1.8 V supply in portable applications?
Yes - the ISL54500IHZ-T is fully specified down to +1.8 V, with typical rON = 12.8 Ω and tON/tOFF = 70 ns/52 ns at that voltage. While performance degrades slightly versus +5 V operation (e.g., higher rON, slower switching), it remains functional and stable across the full −40°C to +85°C temperature range, making it suitable for single-cell Li-ion or coin-cell powered devices where ultra-low supply voltage is mandatory.
ISL54500IHZ-T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Switch Circuit:
- SPDT
- Multiplexer/Demultiplexer Circuit:
- 2:1
- Number of Circuits:
- 1
- On-State Resistance (Max):
- 5Ohm
- Channel-to-Channel Matching (ΔRon):
- 46mOhm
- Voltage - Supply, Single (V+):
- 1.8V ~ 5.5V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 22ns, 15ns
- -3db Bandwidth:
- 350MHz
- Charge Injection:
- 16pC
- Channel Capacitance (CS(off), CD(off)):
- 6pF
- Current - Leakage (IS(off)) (Max):
- 25nA
- Crosstalk:
- -
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-SOT
ISL54500IHZ-T FAQ
1.How can I place an order for ISL54500IHZ-T through Aetrix?
Please submit a Request for Quotation (RFQ) for ISL54500IHZ-T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ISL54500IHZ-T reliable?
The price and inventory of ISL54500IHZ-T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ISL54500IHZ-T is usually 5 days.
3.What payment methods are accepted for ISL54500IHZ-T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ISL54500IHZ-T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ISL54500IHZ-T?
ISL54500IHZ-T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ISL54500IHZ-T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ISL54500IHZ-T?
For technical support, including ISL54500IHZ-T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ISL54500IHZ-T requirements.
6.How does Aetrix verify that ISL54500IHZ-T is sourced from the original manufacturer or authorized distributors?
All ISL54500IHZ-T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ISL54500IHZ-T meets industry standards.
7.What is the process for return or replacement of ISL54500IHZ-T?
All ISL54500IHZ-T units undergo pre-shipment inspection (PSI). If there is an issue with ISL54500IHZ-T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ISL54500IHZ-T part is unused and in its original packaging.
Return procedure for ISL54500IHZ-T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ISL54500IHZ-T Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
