NXP Semiconductors K32W-001-T10

Overview

K32W-001-T10 from NXP Semiconductors is a mezzanine upgrade board module designed to interface with base development boards, enabling hardware-compatible evaluation of K32W061/41, QN9090, and JN5189 wireless MCU families. It supports Zigbee 3.0, Thread, IEEE 802.15.4, and Bluetooth LE 5.0 protocols, features dual-mode RF capability, and integrates NFC NTAG option for tap-to-pair commissioning in smart home gateways.

For engineers reviewing the K32W-001-T10 datasheet, K32W-001-T10 pinout, K32W-001-T10 application, or K32W-001-T10 equivalent, this module enables rapid validation of multi-protocol wireless stack interoperability, low-power RF performance testing, and NFC-assisted provisioning workflows without PCB redesign.

Technical Context

The K32W-001-T10 is a hardware adapter board-not an IC-designed to mount onto compatible base boards (e.g., IOTZTB-DK006) via mezzanine connector. It provides physical and electrical compatibility with K32W061/41 modules (6×6 mm QFN, 640 KB Flash/152 KB SRAM, Arm Cortex-M4 @48 MHz) and maintains signal integrity for RF paths, SPIFI, UART, I²C, and GPIO interfaces across protocol stacks.

It supports runtime switching between K32W061/41 and legacy QN9090/JN5189 modules through configurable jumpers or firmware-selectable routing, preserving debug access via Serial Wire Debug and enabling side-by-side RF performance comparison under identical host conditions.

Key Specifications

Availability

K32W-001-T10 is available at Aetrix Electronics and suitable for smart home gateway development, wireless sensor network prototyping, and multi-protocol IoT device certification requiring stable component supply and consistent hardware reference platforms.

Supply support for K32W-001-T10 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

NXP Semiconductors is a global semiconductor company headquartered in Eindhoven, Netherlands, specializing in secure connectivity solutions for automotive, industrial, and IoT applications.

The K32W-001-T10 belongs to NXP's K32W061/41 wireless MCU platform family, engineered specifically to accelerate development of certified, ultra-low-power, multi-protocol edge devices for residential and commercial automation ecosystems.

FAQ

What is the primary function of the K32W-001-T10?

The K32W-001-T10 is a mezzanine upgrade board that allows developers to evaluate and switch between K32W061/41, QN9090, and JN5189 wireless MCU modules on a common baseboard. It does not contain active silicon itself but provides mechanical, electrical, and signal-routing compatibility to streamline multi-protocol wireless development using the K32W-001-T10 as a hardware abstraction layer.

Does the K32W-001-T10 include an integrated microcontroller?

No, the K32W-001-T10 is a passive hardware adapter board without an onboard MCU. It hosts socketed or soldered modules (e.g., K32W061, QN9090), and all processing, RF, and peripheral functionality comes from the installed module. The K32W-001-T10 ensures correct power sequencing, RF matching, debug routing, and interface alignment so the K32W-001-T10 functions as a seamless carrier.

Can the K32W-001-T10 be used standalone without a baseboard?

No - the K32W-001-T10 requires a compatible baseboard such as the IOTZTB-DK006 to provide power regulation, USB interface, antenna switching, and host connectivity. It lacks voltage regulators, USB transceivers, or RF front-end components; its sole purpose is to serve as a modular interface bridge, and operation of the K32W-001-T10 is fully dependent on integration with a supporting carrier platform.

Which software tools support development with the K32W-001-T10?

Development with the K32W-001-T10 leverages NXP's MCUXpresso IDE and SDK, which include certified Zigbee 3.0, OpenThread, and Bluetooth LE 5.0 protocol stacks. The K32W-001-T10 is validated with IAR Embedded Workbench and supports OTA updates, RF performance analysis via IoT Toolbox, and sniffer-based debugging using the OM15080-K32W dongle alongside the K32W-001-T10.

Is NFC functionality available when using the K32W-001-T10 with all supported modules?

NFC functionality is only available when the K32W-001-T10 is populated with the K32W061 module, which integrates an NFC NTAG® IC. Neither QN9090 nor JN5189 modules include NFC hardware, so NFC-based tap-to-pair commissioning is disabled in those configurations. The K32W-001-T10 routes NFC signals only when the K32W061 is installed - confirming NFC capability depends entirely on the selected module, not the K32W-001-T10 board itself.