NXP Semiconductors KITPF0100SKTEVBE

Overview

KITPF0100SKTEVBE from Freescale Semiconductor is an evaluation socket board designed for programming the one-time programmable (OTP) registers of MMPF0100NPEP and other PF0x00-series power management ICs. It features a 56-pin QFN socket, supports I²C-based configuration via SCL/SDA signals, and interfaces directly with the KITPFPGMEVME programmer using an 8-conductor ribbon cable.

For engineers reviewing the KITPF0100SKTEVBE datasheet, KITPF0100SKTEVBE pinout, KITPF0100SKTEVBE application, or KITPF0100SKTEVBE equivalent, this tool enables rapid OTP fuse programming during early development of consumer and industrial PMIC-based systems-prior to final PCB integration and without soldering.

Technical Context

The KITPF0100SKTEVBE provides direct physical and electrical access to all critical pins of the MMPF0100NPEP in 56QN50S18080 package, including VDDOTP, SCL, SDA, PWRON, GPIO1, GPIO2, and reset/stanby control lines. It routes these signals to a 2×4 header (J1) matching the KITPFPGMEVME programmer's output pinout.

Board-level design includes decoupling capacitors (10 µF, 1 µF, 0.1 µF), LED status indicators (green/red), test points for VDDOTP, SDA, SCL, 3V3, and PWRON, and mounting holes for mechanical stability. No on-board voltage regulation or level-shifting circuitry is integrated-the board relies entirely on external supply and programmer logic levels.

Key Specifications

Availability

KITPF0100SKTEVBE is available at Aetrix Electronics and suitable for consumer electronics prototyping, industrial PMIC evaluation, and embedded power architecture validation requiring stable component supply and traceable evaluation hardware sourcing.

Supply support for KITPF0100SKTEVBE includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Freescale Semiconductor (now part of NXP Semiconductors) was a leading designer of analog and mixed-signal ICs, specializing in power management, microcontrollers, and automotive semiconductors before its 2015 acquisition.

The KITPF0100SKTEVBE belongs to Freescale's PF Series evaluation tool ecosystem, developed specifically to accelerate OTP configuration and functional validation of MMPF0100 and related multi-rail PMICs in pre-production design phases.

FAQ

What is the primary function of the KITPF0100SKTEVBE?

The KITPF0100SKTEVBE is a dedicated programming socket board that enables engineers to configure the one-time programmable (OTP) registers of the MMPF0100NPEP and compatible PF0x00-series PMICs. It does not operate as a standalone device-it requires connection to the KITPFPGMEVME programmer and a host PC running Freescale's configuration software. The KITPF0100SKTEVBE itself contains no active logic or firmware.

Which PMIC packages does the KITPF0100SKTEVBE support?

The KITPF0100SKTEVBE supports only the 56-pin QFN package variant identified as 56QN50S18080, used by the MMPF0100NPEP. It is not compatible with other PF-series devices in different packages (e.g., 48-pin QFN or BGA variants), nor with non-PF family PMICs-even if pin-count or footprint appears similar. Mechanical and signal mapping are specific to this exact package.

Does the KITPF0100SKTEVBE include power regulation or level-shifting circuitry?

No. The KITPF0100SKTEVBE has no onboard voltage regulators, level shifters, or isolation components. It relies entirely on externally supplied 3.3 V power and assumes logic-level compatibility between the KITPFPGMEVME programmer and the target PF0x00 device. All VDDOTP, SCL, and SDA signals are routed passively with minimal trace impedance control.

Can the KITPF0100SKTEVBE be used for functional testing beyond OTP programming?

Limited functional testing is possible-test points provide access to key rails (VCORE, VGENx, VINx, VDDOTP) and control signals (PWRON, GPIO1/2, STANDBY)-but the board lacks monitoring circuitry, current sensing, or dynamic load capability. Its design intent is strictly OTP programming and basic signal verification-not full-system power characterization or runtime behavior analysis. The KITPF0100SKTEVBE does not replace a full-featured evaluation board.

Is the KITPF0100SKTEVBE still supported by NXP after the Freescale acquisition?

NXP maintains legacy documentation and reference designs for the PF Series, including the KITPF0100SKTEVBE User's Guide (KTPF0100SKTUG Rev. 1.0). However, NXP no longer manufactures or stocks this kit. Aetrix Electronics provides verified, traceable inventory sourced from authorized legacy channels, with full documentation and technical context preserved for ongoing design continuity.