NXP Semiconductors KITPFPGMEVME

Overview

KITPFPGMEVME from Freescale Semiconductor is a standalone PF Series Programmer evaluation kit designed to configure and program SMARTMOS PF Family Power Management ICs-including MMPF0100 and MMPF0200-via an 8-pin I²C interface or KITPF0100SKTEVBE socket for OTP fuse programming. It delivers 8.5 V programming voltage, 3.3 V auxiliary supply, PWRON control, and two GPIO outputs.

For engineers reviewing the KITPFPGMEVME datasheet, KITPFPGMEVME pinout, KITPFPGMEVME application, or KITPFPGMEVME equivalent, this tool supports rapid prototyping, production OTP programming, I²C bus isolation during configuration, and integration with i.MX-based application boards requiring precise PMIC initialization sequences.

Technical Context

The KITPFPGMEVME implements a dedicated hardware interface between host PC and PF-series PMICs using USB-to-I²C bridge functionality. Its onboard MC9S908JM60 MCU manages communication protocol, OTP voltage sequencing, and GPIO state control independent of target system operation.

It requires physical disconnection of processor I²C lines during programming-achieved via optional 0 Ω resistors (R5/R6) on customer boards-and supplies VPGM (8.5 V), V3V3 (3.3 V), SCL/SDA, PWRON, and two logic-level GPIOs through a keyed 8-conductor ribbon cable with 100 mil pitch header.

Key Specifications

Availability

KITPFPGMEVME is available at Aetrix Electronics and suitable for PMIC configuration, production OTP programming, and i.MX platform bring-up requiring stable component supply and traceable evaluation tool sourcing.

Supply support for KITPFPGMEVME includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Freescale Semiconductor (now part of NXP Semiconductors) was a global leader in embedded processing, analog, and power management solutions, specializing in automotive, industrial, and consumer applications before its 2015 acquisition.

The KITPFPGMEVME belongs to Freescale's PF Series development tools portfolio, engineered specifically to enable secure, repeatable, and production-ready OTP programming and register configuration of SMARTMOS PF-family PMICs used in i.MX application processors.

FAQ

What is the primary function of the KITPFPGMEVME?

The KITPFPGMEVME is a dedicated hardware programmer for configuring and programming the one-time programmable (OTP) fuses and registers of Freescale's PF-series Power Management ICs, such as the MMPF0100 and MMPF0200. It operates independently of the host processor and enables reliable, isolated I²C-based programming during development and production. The KITPFPGMEVME ensures correct voltage sequencing, PWRON assertion, and GPIO control required for robust PMIC initialization.

Which software is required to operate the KITPFPGMEVME?

The KITPFPGMEVME requires KITPFGUI 4.0-the official graphical user interface provided by Freescale-for device configuration, OTP programming, and register read/write operations. Supporting documentation, including the KTPFSWUG4.pdf user guide, must be downloaded separately from freescale.com. No third-party or generic I²C tools are supported; full functionality depends on this validated software stack.

Does the KITPFPGMEVME support in-circuit programming of PF devices on customer boards?

Yes, the KITPFPGMEVME supports in-circuit programming via its 8-pin header interface connected through a supplied flat ribbon cable. However, successful operation requires temporary isolation of the target processor's I²C lines-typically implemented using unpopulated 0 Ω resistor pads (R5/R6) on the customer board-to prevent bus contention during OTP programming. This isolation is mandatory per Freescale's hardware design guidance.

What are the key electrical signals provided by the KITPFPGMEVME's 8-pin interface?

The KITPFPGMEVME's 8-pin interface delivers VPGM (8.5 V OTP programming voltage), V3V3 (3.3 V auxiliary supply), GND, SCL and SDA (I²C bus), PWRON (PMIC power-on control), GPIO1 (open-drain), and GPIO2 (push-pull logic output). These signals are defined in Table 1 of the KTPFPGHWUG Rev. 1.0 user guide and are essential for safe, functional communication with PF-series PMICs.

Is the KITPFPGMEVME compatible with modern Windows operating systems like Windows 10 or 11?

No-the official documentation specifies Windows XP and Windows 7 as the only supported host operating systems for the KITPFPGMEVME and its KITPFGUI 4.0 software. Freescale did not release updated drivers or GUI versions for Windows 10 or 11. Users requiring newer OS compatibility must evaluate alternative programming methods or consult NXP's legacy support resources for possible community-driven workarounds-not guaranteed or validated by the original manufacturer.