Texas Instruments LM358D-JF

Overview

LM358D-JF from Texas Instruments is a dual operational amplifier in SOIC-8 package, designed for cost-sensitive industrial and consumer applications. It delivers 1.2MHz unity-gain bandwidth, 300µA per amplifier quiescent current, ±3mV max input offset voltage at 25°C, and rail-to-rail input common-mode range including ground-enabling direct low-side current sensing in power supply feedback loops.

For engineers reviewing the LM358D-JF datasheet, LM358D-JF pinout, LM358D-JF application, or LM358D-JF equivalent, this page provides verified electrical specifications, validated SOIC-8 terminal mapping, real-world use cases in motor control and AC inverters, and two confirmed alternative parts with documented parameter and temperature-range differences.

Technical Context

The LM358D-JF implements a bipolar-input, internally compensated two-stage op-amp architecture optimized for single-supply operation from 3V to 36V. Its input stage supports common-mode voltages down to V– (ground), and its output can swing within 20mV of V– and 1.61V of V+ at 5mA load-critical for precision signal conditioning near supply rails.

It features integrated RF/EMI filtering and 2kV HBM ESD protection, making it suitable for electrically noisy environments such as motor drive PCBs and industrial power supplies where transient immunity is required without external shielding.

Key Specifications

Pinout & Package

LM358D-JF is supplied in an 8-pin SOIC (Small Outline Integrated Circuit) package measuring 4.9mm × 6mm, with standard JEDEC MS-012AC footprint and gull-wing leads for surface-mount reflow assembly.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar dual operational amplifier applications.

Compared with LM358DR and LM2904DT, LM358D-JF offers the optimal balance of industrial temperature range (–40°C to 85°C), proven reliability in power supply feedback, and cost efficiency-making it preferred for server PSUs, motor controllers, and HVAC systems where extended life and thermal stability are critical.

Availability

LM358D-JF is available at Aetrix Electronics and suitable for merchant network power supply units, multi-function printers, and AC inverter designs requiring stable component supply across long production lifecycles.

Supply support for LM358D-JF includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Texas Instruments is a global semiconductor leader specializing in analog and embedded processing technologies, with decades of heritage in precision op-amps and power management ICs.

The LM358 family was engineered for cost-sensitive industrial and consumer applications demanding robust performance, wide supply range, and ground-sensing capability-targeting power supplies, motor controls, and sensor interfaces.

FAQ

What is the maximum supply voltage for LM358D-JF?

The LM358D-JF supports a maximum supply voltage of 36V across V+ and V– terminals. This rating is absolute and applies to both single-supply (e.g., V– = 0V, V+ = 36V) and split-supply (e.g., V– = –18V, V+ = +18V) configurations. Exceeding 36V risks permanent damage, as confirmed in Section 5.1 Absolute Maximum Ratings of the TI SLOS068AB datasheet.

Does LM358D-JF support rail-to-rail output swing?

No, LM358D-JF does not provide rail-to-rail output swing. Its output can swing to within 20mV of V– (ground) at 1mA load and up to 1.61V below V+ at the same load. For example, with V+ = 5V, the maximum output is ~3.39V-not 5V. This limitation is explicitly defined in the "Voltage output swing from rail" specification table (Section 5.5) for LM358B/BA variants, which LM358D-JF belongs to.

Is LM358D-JF pin-compatible with LM358DR?

Yes, LM358D-JF is pin-compatible with LM358DR: both use the SOIC-8 package with identical pin 1–8 assignments (OUT1, IN1–, IN1+, V–, IN2+, IN2–, OUT2, V+). However, LM358D-JF is rated for –40°C to +85°C operation, while LM358DR is limited to 0°C to +70°C-so mechanical interchangeability does not guarantee functional equivalence in extended-temperature applications.

What is the input offset voltage specification for LM358D-JF?

The LM358D-JF has a maximum input offset voltage of ±3mV at 25°C, consistent with the LM358B version per TI's SLOS068AB datasheet (Section 5.5). This value increases to ±4mV over the full –40°C to +85°C operating range. The offset is untrimmed and process-dependent, so system-level calibration may be needed for sub-mV precision applications.

Can LM358D-JF drive capacitive loads?

Yes, LM358D-JF is characterized to safely drive up to 100pF capacitive loads without oscillation, as stated in the "Capacitive load drive" parameter (Section 5.5). For loads exceeding 100pF-such as long cables or ADC input filters-a series resistor (typically 10Ω–100Ω) should be placed between the op-amp output and the capacitor to maintain phase margin and prevent instability.