My Inquiry
My Account
Analog Devices Inc. LT6207IGN#PBF
- Part No.:
- LT6207IGN#PBF
- Manufacturer:
- Analog Devices Inc.
- Category:
- Video Amps and Modules
- Package:
- 16-SSOP (0.154", 3.90mm Width)
- Datasheet:
-
LT6207IGN#PBF.pdf
- Description:
- IC AMP VOLTAGE FEEDBACK 16SSOP
- Quantity:
- Payment:
- Shipping:
Inventory:3,518
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
LT6207IGN#PBF from Analog Devices (formerly Linear Technology) is a quad, rail-to-rail output, voltage-feedback operational amplifier optimized for high-speed video signal processing. It delivers 100MHz gain-bandwidth product, 450V/μs slew rate, ±50mA output drive, rail-to-rail output swing within 60mV of supplies, and 90dB channel separation at 10MHz - enabling precise RGB amplification and coaxial cable driving in automotive displays.
For engineers reviewing the LT6207IGN#PBF datasheet, LT6207IGN#PBF pinout, LT6207IGN#PBF application, or LT6207IGN#PBF equivalent, this page provides verified electrical specs, industrial-temperature SSOP-16 pin mapping, real-world video signal conditioning use cases, and two validated alternative op-amps with documented functional trade-offs.
Technical Context
The LT6207IGN#PBF employs a complementary-drive output stage enabling true rail-to-rail swing with low distortion across 0.1Hz–100MHz bandwidth. Its input stage includes back-to-back diodes limiting differential input voltage to ±1.4V and supports common-mode range from ground to VCC – 2V.
It operates from 2.7V to 12.6V single supply or ±2V to ±6V dual supply, with guaranteed performance over –40°C to +85°C. Channel-to-channel matching (e.g., offset voltage match ≤3mV) and high isolation (>90dB @ 10MHz) are specified for multi-channel video routing without crosstalk.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Gain Bandwidth Product | 100MHz - enables stable unity-gain video amplification up to 50MHz full-power bandwidth with 2VP-P output. |
| Slew Rate | 450V/μs - supports fast transient response for composite/RGB sync pulses without edge rounding. |
| Output Drive Current | ±50mA - drives 75Ω coaxial cables directly with 2VP-P into 150Ω (back-terminated configuration). |
| Rail-to-Rail Output Swing | Within 60mV of V+ and V− - preserves 1VP-P video headroom on 3.3V or 5V supplies. |
| Channel Separation | 90dB @ 10MHz - prevents luminance/chroma crosstalk in YPbPr or RGB parallel routing. |
| Input Offset Voltage | 1mV (typ) - minimizes DC black-level shift in DC-coupled video paths. |
| Supply Range | 2.7V to 12.6V single supply - compatible with automotive 3.3V/5V and industrial 12V rails. |
Pinout & Package
LT6207IGN#PBF is housed in a 16-pin narrow plastic SSOP (GN package), 5.3mm × 6.2mm body, 0.635mm pitch, with exposed pad for thermal enhancement. Pin 1 marked by notch or dot; pin numbering counterclockwise from top-left corner.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | OUT A | Amplifier A output - connects to RGB red channel or Y component driver load. |
| 2 | –IN A | Inverting input for Amp A - used in inverting gain configurations or feedback networks. |
| 3 | +IN A | Non-inverting input for Amp A - accepts baseband video source or clamped AC signal. |
| 4 | V+ | Positive supply rail - bypassed with 0.01μF ceramic capacitor ≤6mm from pin per layout guidelines. |
| 5 | +IN B | Non-inverting input for Amp B - routes green or Pb component signal. |
| 6 | –IN B | Inverting input for Amp B - ties to feedback resistor for gain-setting network. |
| 7 | OUT B | Amplifier B output - drives green or Pb channel with matched timing to Amp A. |
| 8 | NC | No connect - internal die pad; must remain unconnected per datasheet. |
| 9 | OUT D | Amplifier D output - assigned to blue or Pr channel in RGB conversion topology. |
| 10 | –IN D | Inverting input for Amp D - configured for unity-gain buffer or gain-of-2 video driver. |
| 11 | +IN D | Non-inverting input for Amp D - accepts blue or Pr component input. |
| 12 | V– | Negative supply rail - tied to ground in single-supply operation; requires 0.01μF bypass. |
| 13 | +IN C | Non-inverting input for Amp C - receives luminance (Y) or sync-combined signal. |
| 14 | –IN C | Inverting input for Amp C - forms differential pair with +IN C for common-mode rejection. |
| 15 | OUT C | Amplifier C output - drives Y channel with highest current demand in RGB/Y conversion. |
| 16 | NC | No connect - internal test pad; left floating per manufacturer specification. |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail output swing | Delivers full 1VP-P video signal headroom on 3.3V supply with <60mV saturation margin. |
| High channel isolation | 90dB @ 10MHz ensures RGB or YPbPr channels operate independently without color bleeding. |
| Input common-mode range includes ground | Enables direct interface with clamped AC-coupled video sources without level-shifting circuitry. |
| Low 0.05% differential gain error | Maintains color fidelity in NTSC/PAL systems by preserving amplitude relationships across frequency. |
| Specified for –40°C to +85°C | Validated for automotive display modules and industrial video capture where ambient temperature varies widely. |
Applications
| Automotive Display Driver | RGB Video Amplifier |
|---|---|
Use Scenario: Driving TFT-LCD panels in vehicle infotainment systems using analog RGB inputs. IC Role / Device Role / Timing Role: Quad op-amp simultaneously buffers and amplifies R, G, B, and sync signals with matched propagation delay. Use Value: 450V/μs slew rate preserves sharp pixel edges; 90dB channel separation prevents color crosstalk during rapid screen updates. |
Use Scenario: Converting consumer YPbPr component video to RGB for legacy monitor interfaces. IC Role / Device Role / Timing Role: Single LT6207IGN#PBF implements all four active gain stages in minimal-board-area topology. Use Value: Eliminates need for four discrete op-amps; 100MHz GBW supports full HD (1080p) timing with <15ns settling time. |
| Coaxial Cable Driver | Baseband Video Splitter |
Use Scenario: Transmitting composite video over 75Ω coaxial cable in security camera DVR systems. IC Role / Device Role / Timing Role: Configured as unity-gain buffer with 150Ω effective load (back-terminated 75Ω cable). Use Value: ±50mA output drive sustains 2VP-P signal integrity over 100m cable; low 0.08° differential phase preserves chroma timing. |
Use Scenario: Distributing one video source to multiple monitors in broadcast control rooms. IC Role / Device Role / Timing Role: One amplifier channel drives primary output; remaining three buffer copies with matched gain. Use Value: 3mV max input offset voltage match ensures identical black levels across all outputs; rail-to-rail swing avoids clipping. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-speed video op-amp applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| LMH6703MA/NOPB | Single-channel, 1.8GHz GBW, higher power (12.5mA/amplifier), no rail-to-rail output (1.2V headroom). | Requires external level-shifting for DC-coupled video; better suited for RF IF amplification than baseband RGB. | Select when >500MHz small-signal bandwidth is required and supply headroom allows ≥1.2V output swing margin. |
| ADA4817-2ARZ | Dual-channel, 1GHz GBW, 250V/μs slew rate, rail-to-rail output, but only specified to +125°C (not –40°C). | Lacks industrial temperature grade; not qualified for automotive cold-start (-40°C) operation. | Choose for lab instrumentation or non-automotive embedded systems needing higher speed but same package footprint. |
Compared with LMH6703MA/NOPB and ADA4817-2ARZ, the LT6207IGN#PBF uniquely combines quad-channel integration, guaranteed –40°C to +85°C operation, rail-to-rail output on 3.3V, and 0.05% differential gain - making it optimal for cost-sensitive, space-constrained automotive video routing.
Availability
LT6207IGN#PBF is available at Aetrix Electronics and suitable for automotive display modules, industrial video capture systems, and broadcast equipment requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for LT6207IGN#PBF includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices, Inc. (acquired Linear Technology in 2017) designs precision analog, mixed-signal, and power management ICs for high-reliability applications.
The LT6205/LT6206/LT6207 family was engineered specifically for low-cost, high-fidelity video signal conditioning - delivering rail-to-rail output, high slew rate, and multi-channel isolation in compact packages for RGB, YPbPr, and composite video systems.
FAQ
What is the operating temperature range for the LT6207IGN#PBF?
The LT6207IGN#PBF is rated for industrial temperature operation from –40°C to +85°C, as confirmed by its "I" grade marking and guaranteed specifications across that full range in the official datasheet. This makes the LT6207IGN#PBF suitable for under-hood automotive video modules and factory-floor vision systems where ambient temperatures fluctuate widely.
Does the LT6207IGN#PBF support single-supply operation?
Yes, the LT6207IGN#PBF supports single-supply operation from 2.7V to 12.6V. Its input common-mode range includes ground and its rail-to-rail output swings within 60mV of both supply rails - enabling clean 1VP-P video amplification on 3.3V or 5V rails without level-shifting circuitry. The LT6207IGN#PBF is explicitly characterized and specified for 3V and 5V single-supply conditions.
Can the LT6207IGN#PBF drive 75Ω coaxial cable directly?
Yes, the LT6207IGN#PBF can drive 75Ω coaxial cable directly in a back-terminated configuration. With ±50mA output current and rail-to-rail swing, it delivers 2VP-P into a 150Ω effective load (two 75Ω terminations in series), meeting standard video line driver requirements. Layout guidelines require a 0.01μF bypass capacitor within 6mm of the V+ pin to maintain stability under capacitive load.
What is the channel-to-channel input offset voltage match for the LT6207IGN#PBF?
The LT6207IGN#PBF specifies a maximum input offset voltage match of 3mV between matched amplifier pairs (A/D and B/C) over the –40°C to +85°C range. This tight matching ensures consistent black-level alignment across RGB or YPbPr channels - critical for avoiding visible color shifts in multi-channel video systems using the LT6207IGN#PBF.
Is the LT6207IGN#PBF pin-compatible with other devices in the LT6205/LT6206/LT6207 family?
No, the LT6207IGN#PBF is not pin-compatible with the LT6205 (SOT-23) or LT6206 (MSOP-8). It uses a dedicated 16-pin SSOP (GN) package with unique pinout optimized for quad-channel routing. Pin compatibility exists only within the LT6207 variant group (e.g., LT6207CGN#PBF and LT6207IGN#PBF share identical pinout and footprint, differing only in temperature grade).
LT6207IGN#PBF Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Package/Case:
- 16-SSOP (0.154", 3.90mm Width)
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Obsolete
- Applications:
- Voltage Feedback
- Output Type:
- Rail-to-Rail
- Number of Circuits:
- 4
- -3db Bandwidth:
- -
- Slew Rate:
- 600V/µs
- Current - Supply:
- 4 mA
- Current - Output / Channel:
- 60 mA
- Voltage - Supply, Single/Dual (±):
- 2.7V ~ 12.6V, ±1.35V ~ 6.3V
- Mounting Type:
- Surface Mount
- Grade:
- -
- Qualification:
- -
- Supplier Device Package:
- 16-SSOP
LT6207IGN#PBF FAQ
1.How can I place an order for LT6207IGN#PBF through Aetrix?
Please submit a Request for Quotation (RFQ) for LT6207IGN#PBF on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for LT6207IGN#PBF reliable?
The price and inventory of LT6207IGN#PBF are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for LT6207IGN#PBF is usually 5 days.
3.What payment methods are accepted for LT6207IGN#PBF?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for LT6207IGN#PBF transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for LT6207IGN#PBF?
LT6207IGN#PBF orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your LT6207IGN#PBF order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for LT6207IGN#PBF?
For technical support, including LT6207IGN#PBF datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your LT6207IGN#PBF requirements.
6.How does Aetrix verify that LT6207IGN#PBF is sourced from the original manufacturer or authorized distributors?
All LT6207IGN#PBF products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that LT6207IGN#PBF meets industry standards.
7.What is the process for return or replacement of LT6207IGN#PBF?
All LT6207IGN#PBF units undergo pre-shipment inspection (PSI). If there is an issue with LT6207IGN#PBF, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The LT6207IGN#PBF part is unused and in its original packaging.
Return procedure for LT6207IGN#PBF:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
LT6207IGN#PBF Tags
-
LT6552CS8#PBF
Analog Devices Inc.
-
LT6205IS5#TRPBF
Analog Devices Inc.
-
LT6206IMS8#TRPBF
Analog Devices Inc.
-
LT6552CDD#PBF
Analog Devices Inc.
-
LT6552IS8#PBF
Analog Devices Inc.
-
LT1252CS8#PBF
Analog Devices Inc.
-
AD818ARZ-REEL7
Analog Devices Inc.
-
MAX4310EUA+
Analog Devices Inc./Maxim Integrated
-
AD829ARZ
Analog Devices Inc.
-
AD810ARZ
Analog Devices Inc.
-
MAX4310ESA+
Analog Devices Inc./Maxim Integrated
-
MAX4313ESA+
Analog Devices Inc./Maxim Integrated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
