My Inquiry
My Account
Analog Devices Inc. LTC6252CS6#TRPBF
- Part No.:
- LTC6252CS6#TRPBF
- Manufacturer:
- Analog Devices Inc.
- Category:
- Instrumentation, Op Amps, Buffer Amps
- Package:
- SOT-23-6 Thin, TSOT-23-6
- Datasheet:
-
LTC6252CS6#TRPBF.pdf
- Description:
- IC OPAMP GP 1 CIRCUIT TSOT23-6
- Quantity:
- Payment:
- Shipping:
Inventory:13,942
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
LTC6252CS6#TRPBF from Analog Devices (formerly Linear Technology) is a single-channel, rail-to-rail input/output operational amplifier optimized for high-speed, low-power signal conditioning. It delivers 720MHz gain-bandwidth product, 280V/µs slew rate, and 2.75nV/√Hz input voltage noise at just 3.5mA supply current, operating from 2.5V to 5.25V supplies. It is widely used as an ADC driver in battery-powered 16-bit data acquisition systems.
For engineers reviewing the LTC6252CS6#TRPBF datasheet, LTC6252CS6#TRPBF pinout, LTC6252CS6#TRPBF application, or LTC6252CS6#TRPBF equivalent, key selection criteria include its TSOT-23-6 package footprint, shutdown capability (42µA disable current), rail-to-rail swing with ±90mA output drive, and verified performance at 2.7V and 5V supplies across –40°C to 125°C.
Technical Context
The LTC6252CS6#TRPBF employs a dual-input-stage architecture-PNP pair active from V– to ~1.2V below V+, and NPN pair taking over near V+-enabling true rail-to-rail common-mode input range (0V to VS). This design maintains stable offset (<350µV typ. PNP mode) and bias current (<100nA typ. at mid-supply) across the full input range.
Its unity-gain-stable 720MHz GBW and 400MHz –3dB bandwidth are achieved with internal compensation optimized for 1kΩ load driving; output stage uses complementary common-emitter topology to deliver rail-to-rail swing and fast recovery from overdrive (3.5µs turn-on, 2µs turn-off).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Gain-Bandwidth Product | 720MHz - Enables stable unity-gain operation up to 400MHz closed-loop bandwidth for high-frequency filtering or ADC buffering. |
| Slew Rate | 280V/µs - Supports clean 4V step response in <36ns, critical for driving SAR ADCs without distortion. |
| Input Voltage Noise | 2.75nV/√Hz @ 1MHz - Low-noise performance preserves SNR in precision front-end amplification stages. |
| Supply Current | 3.5mA max per amplifier - Enables high-speed operation in power-constrained portable instrumentation. |
| Input Common-Mode Range | 0V to VS - Accepts signals from ground to supply rail, simplifying level-shifting in single-supply systems. |
| Output Swing | Rail-to-rail - Delivers full dynamic range into 1kΩ load, minimizing headroom loss in low-voltage designs. |
| Shutdown Current | 42µA - Reduces system standby power while retaining fast wake-up (3.5µs) for duty-cycled applications. |
Pinout & Package
Package: 6-Lead Plastic TSOT-23 (S6), 2.9mm × 1.6mm × 0.8mm profile, exposed pad not present, RoHS-compliant lead-free finish.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 - OUT | Amplifier output | Delivers rail-to-rail voltage swing; capable of sourcing/sinking ≥90mA into 1kΩ load at 5V supply. |
| 2 - V– | Negative supply terminal | Typically connected to GND; supports negative supply down to –2.75V if total supply ≤5.25V. |
| 3 - +IN | Non-inverting input | Full rail-to-rail common-mode range (0V to V+); input bias current <100nA at mid-supply. |
| 4 - –IN | Inverting input | Matches +IN in CMVR and noise; differential input capacitance is 2.5pF (diff mode). |
| 5 - SHDN | Active-low shutdown control | Pulled low (<0.8V) disables amplifier; draws <55µA; floating or >2V enables normal operation. |
| 6 - V+ | Positive supply terminal | Accepts 2.5V to 5.25V; PSRR >66.5dB ensures immunity to supply ripple in noisy environments. |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail input and output | Enables direct interfacing with ADCs and DACs operating at same supply without level shifters. |
| 720MHz gain-bandwidth product | Supports high-fidelity signal conditioning up to 400MHz in unity-gain configuration for RF sampling front ends. |
| 2.75nV/√Hz input voltage noise | Maintains >92dB SNR when driving 16-bit ADCs like LTC2393-16 at 1Msps sample rate. |
| 42µA shutdown current | Reduces power by >98% during idle periods in portable medical or sensor nodes with burst-mode operation. |
| Specified from –40°C to 125°C | Validates performance in automotive under-hood and industrial motor-control environments without derating. |
Applications
| ADC Driver | Rail-to-Rail Buffer |
|---|---|
|
Use Scenario: Driving the analog input of a 16-bit SAR ADC (e.g., LTC2393-16) in a 5V single-supply data acquisition system. IC Role / Device Role / Timing Role: High-speed, low-noise buffer that settles to 0.1% in 36ns and maintains THD < –100dBc at 20kHz. Use Value: Preserves 93.28dB SNR and 104.7dB SFDR measured with fS = 1Msps, enabling full 16-bit ENOB utilization. |
Use Scenario: Level-shifting and impedance transformation for sensor outputs in low-voltage IoT edge nodes. IC Role / Device Role / Timing Role: Unity-gain follower with rail-to-rail I/O, operating from 2.7V supply and consuming only 3.5mA. Use Value: Eliminates external biasing components; supports direct connection to 0–2.7V thermistor or bridge sensor outputs. |
| Active Filter Stage | Battery-Powered Instrumentation |
|
Use Scenario: Second-order Sallen-Key low-pass filter in portable oscilloscope front end with 100MHz cutoff. IC Role / Device Role / Timing Role: High-GBW, low-distortion amplifier providing precise pole placement and minimal phase error. Use Value: Achieves <0.05° differential phase and 0.1% differential gain error at NTSC frequencies, preserving video fidelity. |
Use Scenario: Signal conditioning in handheld multimeter or portable spectrum analyzer powered by Li-ion battery. IC Role / Device Role / Timing Role: Precision op amp with shutdown mode activated between measurements to extend battery life. Use Value: Cuts quiescent power from 3.5mA to 42µA during standby-extending 200mAh battery runtime from 57h to >4760h. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-speed, low-power op amp applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ADA4897-1ARMZ | Lower noise (1.1nV/√Hz), higher supply current (10.5mA), no shutdown pin, MSOP-8 package. | Better SNR in ultra-low-noise preamps; unsuitable where shutdown or TSOT-23 footprint is required. | Select ADA4897-1ARMZ only when noise dominates over power and board space constraints. |
| LMH6629MA/NOPB | Higher GBW (1.5GHz), higher supply current (12.5mA), no rail-to-rail input, SOIC-8 package. | Superior speed for >500MHz applications; incompatible with rail-to-rail input requirements or low-voltage operation. | Choose LMH6629MA/NOPB only for non-rail-to-rail, high-voltage (>±5V) systems demanding >1GHz bandwidth. |
Compared with ADA4897-1ARMZ and LMH6629MA/NOPB, the LTC6252CS6#TRPBF uniquely balances 720MHz bandwidth, 2.75nV/√Hz noise, 3.5mA supply current, rail-to-rail I/O, and TSOT-23-6 footprint-making it optimal for space- and power-constrained high-resolution ADC interfaces.
Availability
LTC6252CS6#TRPBF is available at Aetrix Electronics and suitable for high-speed data acquisition, portable instrumentation, and automotive sensor signal conditioning requiring stable component supply across temperature and volume production.
Supply support for LTC6252CS6#TRPBF includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices, Inc. (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing technologies, serving industrial, automotive, communications, and healthcare markets.
The LTC6252 family was designed by ADI's Linear Technology division specifically for low-power, high-speed signal conditioning in single-supply, space-constrained systems-emphasizing rail-to-rail operation, fast settling, and robust noise performance.
FAQ
What is the maximum operating temperature range for the LTC6252CS6#TRPBF?
The LTC6252CS6#TRPBF is specified over the commercial temperature range of 0°C to 70°C. Its absolute maximum junction temperature is 150°C, and it is fully characterized for functionality from –40°C to 125°C, though guaranteed parametric performance applies only within the 0°C to 70°C range per the datasheet's "Specified Temperature Range" column for this part marking.
Does the LTC6252CS6#TRPBF support true rail-to-rail input at 2.7V supply?
Yes, the LTC6252CS6#TRPBF supports rail-to-rail input from V– to V+ across its full 2.5V to 5.25V supply range. At 2.7V supply, the input common-mode range is confirmed as 0V to 2.7V, with PNP input stage active up to ~1.5V and NPN stage covering the upper ~1.2V-ensuring seamless transition and continuous operation across the entire range.
What is the typical output drive capability of the LTC6252CS6#TRPBF at 5V supply?
At 5V supply, the LTC6252CS6#TRPBF delivers ±90mA short-circuit output current and sustains rail-to-rail swing into 1kΩ loads. Specifically, output low voltage is ≤65mV above V– at no load and ≤120mV at 5mA sink; output high voltage is ≤120mV below V+ at no load and ≤210mV at 5mA source-verified across –40°C to 125°C.
How does the shutdown function behave on the LTC6252CS6#TRPBF?
The LTC6252CS6#TRPBF features an active-low SHDN pin (Pin 5) with logic thresholds of VL ≤0.8V (disable) and VH ≥2.0V (enable). When disabled, supply current drops to 42µA max, output enters high-impedance state with leakage <100nA, and turn-on/off times are 3.5µs and 2µs respectively-enabling rapid power cycling in burst-mode systems.
Can the LTC6252CS6#TRPBF drive capacitive loads directly without stability issues?
The LTC6252CS6#TRPBF is unity-gain stable but requires external series output resistance (RS) for capacitive loads >100pF. For example, with RS = 20Ω, overshoot remains <10% up to 1000pF in AV = 1 configuration. Stability is maintained without oscillation, but settling time increases with larger CL; refer to Figure 36 in the datasheet for RS vs. CL design guidance.
LTC6252CS6#TRPBF Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Series:
- -
- Package/Case:
- SOT-23-6 Thin, TSOT-23-6
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Last Time Buy
- Amplifier Type:
- General Purpose
- Number of Circuits:
- 1
- Output Type:
- Rail-to-Rail
- Slew Rate:
- 280V/µs
- Gain Bandwidth Product:
- 720 MHz
- -3db Bandwidth:
- 400 MHz
- Current - Input Bias:
- 1.4 µA
- Voltage - Input Offset:
- 100 µV
- Current - Supply:
- 4.25mA
- Current - Output / Channel:
- -
- Voltage - Supply Span (Min):
- 2.5 V
- Voltage - Supply Span (Max):
- 5.25 V
- Operating Temperature:
- 0°C ~ 70°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TSOT-23-6
LTC6252CS6#TRPBF FAQ
1.How can I place an order for LTC6252CS6#TRPBF through Aetrix?
Please submit a Request for Quotation (RFQ) for LTC6252CS6#TRPBF on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for LTC6252CS6#TRPBF reliable?
The price and inventory of LTC6252CS6#TRPBF are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for LTC6252CS6#TRPBF is usually 5 days.
3.What payment methods are accepted for LTC6252CS6#TRPBF?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for LTC6252CS6#TRPBF transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for LTC6252CS6#TRPBF?
LTC6252CS6#TRPBF orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your LTC6252CS6#TRPBF order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for LTC6252CS6#TRPBF?
For technical support, including LTC6252CS6#TRPBF datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your LTC6252CS6#TRPBF requirements.
6.How does Aetrix verify that LTC6252CS6#TRPBF is sourced from the original manufacturer or authorized distributors?
All LTC6252CS6#TRPBF products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that LTC6252CS6#TRPBF meets industry standards.
7.What is the process for return or replacement of LTC6252CS6#TRPBF?
All LTC6252CS6#TRPBF units undergo pre-shipment inspection (PSI). If there is an issue with LTC6252CS6#TRPBF, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The LTC6252CS6#TRPBF part is unused and in its original packaging.
Return procedure for LTC6252CS6#TRPBF:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
LTC6252CS6#TRPBF Tags
-
LM358DT
STMicroelectronics
-
LM358DR
Texas Instruments
-
LM2904DR
Texas Instruments
-
LM358ADR
Texas Instruments
-
LM2904DGKR
Texas Instruments
-
LM324DR
Texas Instruments
-
MCP6006T-E/OT
Microchip Technology
-
MCP6006UT-E/OT
Microchip Technology
-
LM324PWR
Texas Instruments
-
LM2902PWR
Texas Instruments
-
LM2902DR
Texas Instruments
-
LM358P
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
