My Inquiry
My Account
Renesas M30622F8PFP#U9C
- Part No.:
- M30622F8PFP#U9C
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 100-BQFP
- Datasheet:
-
M30622F8PFP#U9C.pdf
- Description:
- IC MCU 16BIT 64KB FLASH 100QFP
- Quantity:
- Payment:
- Shipping:
Inventory:2,274
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
M30622F8PFP#U9C from Renesas Electronics is a 16-bit Flash microcontroller in the M16C/62P Group, built on a silicon-gate CMOS process with an M16C/60 Series CPU core. It features 64 KB + 4 KB Flash ROM, 4 KB RAM, operates at up to 24 MHz (41.7 ns min instruction time), and supports single-chip mode for embedded control in office equipment and industrial systems.
For engineers reviewing the M30622F8PFP#U9C datasheet, M30622F8PFP#U9C pinout, M30622F8PFP#U9C application, or M30622F8PFP#U9C equivalent, key selection criteria include its 100-pin QFP package, -40°C to +85°C operating range, 10-bit 26-channel A/D converter, dual 8-bit D/A outputs, and integrated IEBus/I²C serial interfaces for real-time device control.
Technical Context
The M30622F8PFP#U9C implements a 16-bit M16C/60 CPU core with 91 basic instructions and supports memory-mapped I/O across a 1 Mbyte address space. Its clock system includes main/subclock generation circuits, on-chip oscillator, and PLL synthesizer - enabling flexible timing configurations for deterministic real-time execution.
Peripheral integration includes two DMAC channels, CCITT-CRC calculation circuit, 15-bit watchdog timer with prescaler, and multifunction timers (Timer A: 5×16-bit channels; Timer B: 6×16-bit channels) with three-phase motor control capability - all directly accessible via dedicated I/O ports and interrupt vectors.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | M16C/60 Series 16-bit RISC core with 91 instructions and 41.7 ns min instruction time at 24 MHz |
| Memory | 64 KB + 4 KB Flash ROM (block A endurance: 10,000 cycles), 4 KB RAM |
| Operating Temp | -40°C to +85°C ambient, qualified for industrial applications per Renesas "Standard" grade |
| A/D Converter | 10-bit resolution, 26-channel multiplexed input, usable for sensor signal acquisition in closed-loop control |
| D/A Converter | Two independent 8-bit voltage-output DACs for analog actuator drive or reference generation |
| Serial Interfaces | 3-channel UART/clock-sync/I²C/IEBus support - enables multi-protocol communication without external transceivers |
| Power Modes | Wait mode: 1.8 µA @ 3 V / 32 kHz; Stop mode: 0.7 µA @ 3 V - suitable for battery-backed low-power operation |
Pinout & Package
Package: 100-pin plastic molded QFP (PRQP0100JB-A, equivalent to 100P6S-A). Lead-free, RoHS-compliant construction with standard JEDEC footprint.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VCC1, VCC2 | Power supply inputs | VCC1 = 3.0–5.5 V core logic; VCC2 = 2.7 V to VCC1 I/O supply - supports mixed-voltage interfacing |
| XIN/XOUT | Main system clock oscillator terminals | Accepts external crystal/resonator (1–20 MHz) or external clock source for precise timing control |
| XCIN/XCOUT | Sub-clock oscillator terminals | Supports 32.768 kHz watch crystal for RTC or low-power wake-up timing |
| P0–P6, P8–P10 | General-purpose I/O ports | 87 total I/O pins with programmable direction, pull-up, and peripheral function multiplexing |
| INT0–INT7 | External interrupt inputs | Eight dedicated edge-triggered interrupt request lines for asynchronous event handling |
Key Features
| Feature | Design Value |
|---|---|
| Integrated PLL synthesizer | Enables stable high-frequency internal clock generation from low-frequency external crystals - reduces EMI and board space |
| Three-phase motor control circuit | Dedicated hardware for generating complementary PWM waveforms with dead-time insertion - simplifies inverter gate driver design |
| I²C and IEBus interfaces | On-die protocol engines eliminate need for external bus controllers - lowers BOM cost and firmware overhead |
| Flash memory with block-level endurance | Block A and Block 1 rated for 10,000 program/erase cycles - supports field firmware updates in critical data sectors |
| CCITT-CRC calculation circuit | Hardware-accelerated CRC-16 computation offloads CPU during communication checksumming - improves throughput in serial protocols |
Applications
| Office Equipment Control | Industrial Motor Drive |
|---|---|
Use Scenario: Real-time coordination of paper feed, scanning, and print head motion in multifunction printers. IC Role / Device Role / Timing Role: Central controller executing motion profiles, managing sensor feedback, and synchronizing peripherals via DMAC and timers. Use Value: Integrated 3-phase motor control circuit and 26-channel A/D enable direct interface to stepper/servo drivers and position sensors - eliminating external timing ICs. | Use Scenario: Closed-loop speed and torque regulation in HVAC blower or conveyor belt drives. IC Role / Device Role / Timing Role: Real-time PWM generation, current sensing, thermal monitoring, and fault response within <100 µs latency. Use Value: Dual 8-bit DACs provide analog setpoint references; 15-bit watchdog ensures fail-safe shutdown on software hang - meeting IEC 61800-5-2 functional safety requirements. |
| Home Appliance UI | Automotive Body Control |
Use Scenario: Touch-panel interface, LED display management, and appliance state logic in washing machines or microwaves. IC Role / Device Role / Timing Role: User input scanning, display refresh, buzzer tone generation, and EEPROM-backed settings storage. Use Value: 100-pin I/O count supports direct connection to 7-segment displays, capacitive touch pads, and relay drivers - reducing external glue logic. | Use Scenario: Door lock actuation, window lift control, and interior lighting sequencing in entry-level vehicles. IC Role / Device Role / Timing Role: CAN/I²C gateway between body domain MCU and LIN-sensor nodes; manages power sequencing and diagnostics. Use Value: IEBus and I²C interfaces allow native communication with legacy automotive subsystems; Flash endurance supports 15+ year vehicle lifecycle reprogramming. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F100PLGFB#30 | RL78/G13-based; 20 MHz max, 64 KB Flash, 4 KB RAM, 64-pin LQFP - lower pin count, no IEBus, no 3-phase motor control | Limited to simpler UI/control tasks; lacks hardware motor control and legacy bus support | Select when migrating to newer RL78 platform with lower power and toolchain continuity |
| M30622F8PGP#U9C | Same die, identical specs, but in 100-pin LQFP (PLQP0100KB-A) package - different land pattern and thermal profile | Requires PCB redesign; better thermal dissipation and higher I/O routing density | Choose for new designs needing improved thermal performance or compatibility with existing LQFP layouts |
Compared with R5F100PLGFB#30, M30622F8PFP#U9C delivers superior real-time motor control and legacy bus interoperability; versus M30622F8PGP#U9C, it offers identical functionality in a 100-pin QFP footprint optimized for cost-sensitive industrial PCB assembly.
Availability
M30622F8PFP#U9C is available at Aetrix Electronics and suitable for office equipment, industrial motor drives, and home appliance control requiring stable component supply over extended production lifecycles.
Supply support for M30622F8PFP#U9C includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader formed in 2010 through the merger of NEC Electronics and Renesas Technology, specializing in microcontrollers, analog, and power solutions.
The M16C/62P Group was designed for cost-sensitive, real-time embedded control in industrial, office, and consumer equipment - emphasizing peripheral integration, Flash flexibility, and industrial temperature resilience.
FAQ
What is the maximum operating frequency of the M30622F8PFP#U9C?
The M30622F8PFP#U9C supports a maximum BCLK frequency of 24 MHz, achieving a minimum instruction execution time of 41.7 ns under VCC1 = 3.3–5.5 V conditions. This timing is validated across the full -40°C to +85°C operating range and enables deterministic real-time response for motor control and communication tasks.
Does the M30622F8PFP#U9C include hardware support for IEBus communication?
Yes, the M30622F8PFP#U9C integrates a dedicated IEBus interface compliant with the NEC IEBus standard (registered trademark), supporting both master and slave modes. This allows direct connection to automotive and industrial subsystems such as climate control panels and sensor networks without external protocol translators.
What Flash memory endurance specifications apply to the M30622F8PFP#U9C with product code U9?
The M30622F8PFP#U9C (U9 product code) guarantees 1,000 program/erase cycles for user ROM areas excluding Block A and Block 1, and 10,000 cycles for Block A and Block 1 - confirmed in Renesas documentation REJ03B0001-0241 Table 1.8. This enables robust field firmware updates in safety-critical data zones.
Can the M30622F8PFP#U9C operate from a single 3.3 V supply?
Yes, the M30622F8PFP#U9C operates with VCC1 = 3.0–5.5 V and VCC2 = 2.7 V to VCC1, allowing full functionality at 3.3 V. Power consumption is 8 mA at 10 MHz and drops to 1.8 µA in wait mode - making it suitable for 3.3 V industrial systems with standby power constraints.
Is the M30622F8PFP#U9C pin-compatible with other members of the M16C/62P Group?
The M30622F8PFP#U9C uses the 100-pin PRQP0100JB-A QFP package shared with other 100-pin M16C/62P variants (e.g., M30620FCPFP), but pin functions vary by memory size and peripheral configuration. Pin compatibility must be verified per specific variant's datasheet - not assumed across the family.
M30622F8PFP#U9C Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 100-BQFP
- Series:
- M16C™ M16C/60/62P
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- M16C/60
- Core Size:
- 16-Bit
- Speed:
- 24MHz
- Connectivity:
- I2C, IEBus, UART/USART
- Peripherals:
- DMA, WDT
- Number of I/O:
- 85
- Program Memory Size:
- 64KB (64K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- 4K x 8
- RAM Size:
- 4K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.7V ~ 5.5V
- Data Converters:
- A/D 26x10b; D/A 2x8b
- Oscillator Type:
- Internal
- Operating Temperature:
- -20°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
M30622F8PFP#U9C FAQ
1.How can I place an order for M30622F8PFP#U9C through Aetrix?
Please submit a Request for Quotation (RFQ) for M30622F8PFP#U9C on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for M30622F8PFP#U9C reliable?
The price and inventory of M30622F8PFP#U9C are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for M30622F8PFP#U9C is usually 5 days.
3.What payment methods are accepted for M30622F8PFP#U9C?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for M30622F8PFP#U9C transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for M30622F8PFP#U9C?
M30622F8PFP#U9C orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your M30622F8PFP#U9C order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for M30622F8PFP#U9C?
For technical support, including M30622F8PFP#U9C datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your M30622F8PFP#U9C requirements.
6.How does Aetrix verify that M30622F8PFP#U9C is sourced from the original manufacturer or authorized distributors?
All M30622F8PFP#U9C products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that M30622F8PFP#U9C meets industry standards.
7.What is the process for return or replacement of M30622F8PFP#U9C?
All M30622F8PFP#U9C units undergo pre-shipment inspection (PSI). If there is an issue with M30622F8PFP#U9C, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The M30622F8PFP#U9C part is unused and in its original packaging.
Return procedure for M30622F8PFP#U9C:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
M30622F8PFP#U9C Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
