My Inquiry
My Account
Renesas M30622SAGP#U5
- Part No.:
- M30622SAGP#U5
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 100-LQFP
- Datasheet:
-
M30622SAGP#U5.pdf
- Description:
- IC MCU 16BIT ROMLESS 100LFQFP
- Quantity:
- Payment:
- Shipping:
Inventory:4,424
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
M30622SAGP#U5 from Renesas Electronics is a 16-bit single-chip microcontroller based on the M16C/60 CPU core, housed in a 100-pin plastic QFP (100P6S-A) package. It integrates 128KB mask ROM, 5KB RAM, a 10-bit 8-channel ADC expandable to 26 channels, dual 8-bit DACs, two DMAC channels, and five 16-bit I/O timers - enabling real-time motor control and industrial I/O management in office equipment and automotive body electronics.
For engineers reviewing the M30622SAGP#U5 datasheet, M30622SAGP#U5 pinout, M30622SAGP#U5 application, or M30622SAGP#U5 equivalent, this MCU delivers deterministic 62.5ns instruction execution at 16MHz, supports memory expansion up to 4MB, and provides four chip select outputs for external peripheral interfacing - critical for embedded systems requiring deterministic timing and multi-peripheral coordination.
Technical Context
The M30622SAGP#U5 implements the M16C/60 Series CPU core with 91 basic instructions and a 1M-byte linear address space. Its dual clock generation circuits support both quartz crystal (XIN/XOUT) and ceramic resonator (XCIN/XCOUT) configurations, enabling flexible system clocking without external PLLs.
It features 25 internal and 8 external interrupt sources across 7 priority levels, including dedicated key input and NMI handling. The integrated CRC-CCITT calculation circuit (X16+X12+X5+1) accelerates data integrity checks in serial communication stacks and firmware update protocols.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | M16C/60 16-bit RISC core with 91 instructions and 1M-byte address space |
| ROM/RAM | 128KB mask ROM + 5KB RAM - sufficient for standalone motor control firmware with calibration tables |
| ADC/DAC | 10-bit 8-channel ADC (expandable to 26), 8-bit ×2 DAC - supports analog sensor feedback and actuator drive in closed-loop systems |
| Timers | 5× 16-bit I/O timers + 6× 16-bit input timers - enables simultaneous PWM generation, pulse-width measurement, and quadrature decoding |
| Serial Interfaces | 3× UART/clock-synchronous SI/O + 2× clock-synchronous SI/O - supports RS-485, I²C (via shared UART channel), and custom synchronous protocols |
| Supply Range | 4.2V–5.5V at 16MHz (no software wait) - compatible with standard 5V industrial power rails |
| Package | 100-pin plastic QFP (100P6S-A), 0.65mm pitch - supports high-density PCB layouts with full external bus access |
Pinout & Package
Package: 100-pin plastic molded QFP (100P6S-A), 0.65 mm lead pitch, JEDEC MS-026 compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| P00–P07 | 8-bit bidirectional I/O port / ADC input | Configurable as general-purpose I/O or A/D inputs AN00–AN07; pull-up enable per 4-bit group in single-chip mode |
| P40–P47 | Chip select outputs CS0–CS3 + address A16–A19 | Four dedicated CS lines for independent peripheral selection; A16–A19 extend external memory addressing beyond 64KB |
| P50–P57 | External bus control: WR, RD, BCLK, ALE, RDY | Full 16-bit multiplexed bus interface supporting 4MB memory expansion with hardware wait-state generation |
| P60–P67, P70–P77 | UART0/1/2, CLK0/1/2, RxD/TxD, CTS/RTS | Three independent serial channels - UART0/1 support full modem handshaking; UART2 supports exclusive transmission mode |
| XIN/XOUT, XCIN/XCOUT | Dual crystal/resonator oscillator inputs | Independent main clock (XIN/XOUT) and sub-clock (XCIN/XCOUT) domains enable RTC operation during CPU sleep |
Key Features
| Feature | Design Value |
|---|---|
| Integrated DMAC | 2-channel DMA controller with 24 trigger sources - offloads CPU during ADC sampling bursts or memory-to-peripheral transfers |
| Watchdog Timer | 15-bit watchdog with prescaler - ensures fail-safe recovery in unattended automotive body control modules |
| CRC-CCITT Engine | Hardware CRC generator using X16+X12+X5+1 polynomial - accelerates firmware OTA validation and CAN message checksumming |
| Programmable I/O | 87 GPIO lines with mixed analog/digital functions - enables single-chip integration of sensor acquisition, PWM drive, and serial comms |
| Operating Temperature | −40°C to +85°C (industrial grade) - qualified for under-hood automotive and factory automation environments |
Applications
| Office Equipment Control | Automotive Body Electronics |
|---|---|
|
Use Scenario: Real-time coordination of paper feed, toner delivery, and thermal fusing in laser printers. IC Role / Device Role / Timing Role: Central controller executing motion profiles, monitoring sensors, and managing serial communication with host PC. Use Value: Deterministic 62.5ns instruction timing ensures precise stepper motor phase sequencing and thermal regulation within ±0.5°C tolerance. |
Use Scenario: Door module managing window lift, mirror adjustment, and interior lighting in passenger vehicles. IC Role / Device Role / Timing Role: Standalone body controller interfacing with LIN transceivers, relays, and potentiometric position sensors. Use Value: Integrated 10-bit ADC and 8-bit DAC eliminate external signal conditioning ICs, reducing BOM count by 3 components per module. |
| Industrial Motor Drive | Communications Terminal |
|
Use Scenario: Closed-loop speed and position control of 3-phase BLDC motors in HVAC blowers and conveyor systems. IC Role / Device Role / Timing Role: Real-time PWM generator with timer synchronization for six-step commutation and current sensing. Use Value: Five 16-bit I/O timers support simultaneous PWM output, encoder capture, and fault detection - eliminating need for external timer ASICs. |
Use Scenario: Protocol translation and status monitoring in RS-485 fieldbus gateways for building automation. IC Role / Device Role / Timing Role: Dual UART interface bridging Modbus RTU and BACnet MS/TP networks with CRC-accelerated packet validation. Use Value: Hardware CRC engine reduces CPU load by 18% during 100kbps serial throughput, enabling concurrent web server tasks. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F102MAASP#30 | RL78/G13 core, 32KB flash, 4KB RAM, lower power (120μA/MHz), no external bus interface | Lacks CS outputs and 16-bit multiplexed bus - unsuitable for memory-mapped peripherals or legacy 8080-style interfaces | Select when low-power battery operation is required and external memory expansion is unnecessary |
| HD64F3687F25 | H8/300H core, 256KB flash, 16KB RAM, 80-pin QFP, no integrated DAC or CRC engine | Higher memory capacity but missing dual DAC and hardware CRC - requires external components for analog output and data integrity | Select for firmware-intensive applications needing >128KB code space where analog output is handled externally |
Compared with R5F102MAASP#30 and HD64F3687F25, the M30622SAGP#U5 uniquely combines external bus support, dual DACs, and hardware CRC in a single 100-pin package - making it the only option among the three capable of replacing legacy 8080-based controllers while maintaining analog actuation and secure firmware updates.
Availability
M30622SAGP#U5 is available at Aetrix Electronics and suitable for office equipment control, automotive body electronics, industrial motor drive, communications terminal design, and industrial automation requiring stable component supply across extended product lifecycles.
Supply support for M30622SAGP#U5 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader formed in 2010 through the merger of NEC Electronics and Renesas Technology, specializing in microcontrollers, analog, and power devices.
The M16C/62T Group, including M30622SAGP#U5, was designed for cost-sensitive, high-reliability embedded control in automotive body systems and industrial equipment - emphasizing deterministic real-time performance, integrated analog peripherals, and long-term supply stability.
FAQ
What is the maximum operating frequency supported by the M30622SAGP#U5?
The M30622SAGP#U5 achieves a shortest instruction execution time of 62.5ns at 16MHz with VCC = 5V and no software wait states. Its clock generating circuit supports external quartz crystals up to 16MHz directly; higher frequencies require external clock sources and must comply with the 4.2V–5.5V supply voltage specification. The M30622SAGP#U5 does not support internal PLL multiplication beyond its base clock.
Does the M30622SAGP#U5 support external memory expansion, and what is the maximum addressable space?
Yes, the M30622SAGP#U5 supports external memory expansion via its 16-bit multiplexed bus interface with four chip select outputs (CS0–CS3). It can address up to 4MB of external memory when configured with A0–A19 and appropriate wait-state control. The M30622SAGP#U5 datasheet confirms expandability to 4MB, though operation beyond 1.2MB requires verification of timing margins under target conditions.
How many analog-to-digital converter channels does the M30622SAGP#U5 provide, and are they configurable?
The M30622SAGP#U5 integrates a 10-bit ADC with 8 dedicated input channels (AN00–AN07) and supports expansion to 26 channels via software-configurable alternate functions on ports P0, P1, P9, and P10. Channel selection, sample-and-hold timing, and trigger sources (software, timer, or external) are fully programmable - enabling synchronized multi-channel acquisition for motor current and temperature monitoring.
What serial communication interfaces are available on the M30622SAGP#U5?
The M30622SAGP#U5 provides three UART/clock-synchronous serial I/O channels (UART0–UART2) and two additional clock-synchronous SI/O channels. UART0 and UART1 support full modem control (CTS/RTS), while UART2 operates in exclusive transmission mode. One UART channel can be configured as an I²C interface, and all channels support programmable baud rates and framing options - meeting requirements for industrial fieldbus and automotive diagnostic protocols.
Is the M30622SAGP#U5 qualified for automotive applications, and what temperature grade does it carry?
Yes, the M30622SAGP#U5 is an 85°C guaranteed version (denoted by "T" in its part number suffix), qualified for automotive body electronics applications per Renesas' "Standard" quality grade classification. It operates reliably from −40°C to +85°C and meets AEC-Q100 stress test requirements for temperature cycling, humidity, and ESD - making it suitable for door modules, seat controls, and HVAC systems outside the engine compartment.
M30622SAGP#U5 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 100-LQFP
- Series:
- M16C™ M16C/60/62A
- Packaging:
- Bulk
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- M16C/60
- Core Size:
- 16-Bit
- Speed:
- 16MHz
- Connectivity:
- SIO, UART/USART
- Peripherals:
- DMA, PWM, WDT
- Number of I/O:
- 87
- Program Memory Size:
- -
- Program Memory Type:
- ROMless
- EEPROM Size:
- -
- RAM Size:
- 3K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.7V ~ 5.5V
- Data Converters:
- A/D 10x10b; D/A 2x8b
- Oscillator Type:
- Internal
- Operating Temperature:
- -20°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
M30622SAGP#U5 FAQ
1.How can I place an order for M30622SAGP#U5 through Aetrix?
Please submit a Request for Quotation (RFQ) for M30622SAGP#U5 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for M30622SAGP#U5 reliable?
The price and inventory of M30622SAGP#U5 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for M30622SAGP#U5 is usually 5 days.
3.What payment methods are accepted for M30622SAGP#U5?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for M30622SAGP#U5 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for M30622SAGP#U5?
M30622SAGP#U5 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your M30622SAGP#U5 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for M30622SAGP#U5?
For technical support, including M30622SAGP#U5 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your M30622SAGP#U5 requirements.
6.How does Aetrix verify that M30622SAGP#U5 is sourced from the original manufacturer or authorized distributors?
All M30622SAGP#U5 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that M30622SAGP#U5 meets industry standards.
7.What is the process for return or replacement of M30622SAGP#U5?
All M30622SAGP#U5 units undergo pre-shipment inspection (PSI). If there is an issue with M30622SAGP#U5, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The M30622SAGP#U5 part is unused and in its original packaging.
Return procedure for M30622SAGP#U5:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
M30622SAGP#U5 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
