My Inquiry
My Account
Renesas M30624FGPGP#D5
- Part No.:
- M30624FGPGP#D5
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 100-LQFP
- Datasheet:
-
M30624FGPGP#D5.pdf
- Description:
- IC MCU 16BIT 256KB 100LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:4,668
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
M30624FGPGP#D5 from Renesas Electronics is a 16-bit Flash-based microcontroller in the M16C/62P Group, built on the M16C/60 Series CPU core. It features 256 KB + 4 KB Flash ROM, 20 KB RAM, operates at up to 24 MHz (41.7 ns min instruction time), and integrates UART, I²C, IEBus, 10-bit A/D (26 channels), dual 8-bit D/A, two DMAC channels, and three-phase motor control circuitry - deployed in industrial motor drives and office equipment control systems.
For engineers reviewing the M30624FGPGP#D5 datasheet, M30624FGPGP#D5 pinout, M30624FGPGP#D5 application, or M30624FGPGP#D5 equivalent, key selection criteria include its 100-pin LQFP package, -20°C to +85°C operating range (Product Code D5), Flash endurance (1,000× in user ROM area, 10,000× in Block A/1), and compatibility with memory expansion mode for up to 4 MB address space.
Technical Context
The M30624FGPGP#D5 implements a silicon-gate CMOS 16-bit CPU core with 91 basic instructions and supports single-chip, memory expansion, and microprocessor operating modes. Its clock system includes main/subclock generation circuits, on-chip oscillator, and PLL synthesizer - enabling flexible timing configurations including 32 kHz standby operation.
Peripheral integration includes Timer A (16-bit × 5 channels) and Timer B (16-bit × 6 channels), CRC calculation (CCITT polynomial X¹⁶+X¹²+X⁵+1), watchdog timer (15-bit with prescaler), and interrupt controller with 29 internal + 8 external sources across 7 priority levels - optimized for deterministic real-time control in embedded systems.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | M16C/60 Series 16-bit RISC core with 91 instructions and 1 MB linear address space |
| Flash Memory | 256 KB + 4 KB (Block A), 1,000× program/erase endurance in user ROM area, 10,000× in Block A/1 |
| RAM | 20 KB on-chip SRAM for data and stack storage in real-time execution |
| Operating Voltage | VCC1 = 3.0–5.5 V; supports 24 MHz operation at 3.3 V or 5.0 V supply |
| Power Consumption | 14 mA active (5 V, 24 MHz), 1.8 µA wait mode (3 V, 32 kHz), 0.7 µA stop mode |
| Package & Temp | 100-pin plastic LQFP (PLQP0100KB-A), rated for -20°C to +85°C ambient (Product Code D5) |
| Peripherals | 3 serial interfaces (UART/I²C/IEBus), 10-bit A/D (26 ch), dual 8-bit D/A, 2 DMAC channels, 3-phase motor control |
Pinout & Package
Package: 100-pin plastic LQFP (PLQP0100KB-A), 14 mm × 14 mm body, 0.5 mm pitch, exposed pad not specified.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| P00–P07 | Port P0 bidirectional I/O | 8-bit general-purpose port with pull-up option; used for system control signals and peripheral interface |
| P10–P17 | Port P1 bidirectional I/O | 8-bit port supporting timer A/B capture/compare, serial interface functions, and external interrupt inputs |
| XIN/XOUT | Main system clock input/output | Connects to external crystal (1–20 MHz) or ceramic resonator; enables precise timing for CPU and peripherals |
| XCIN/XCOUT | Sub-clock input/output | Supports 32.768 kHz watch crystal for low-power RTC and wake-up timing in wait/stop modes |
| VCC1/VCC2 | Power supply pins | VCC1 powers CPU/core logic (3.0–5.5 V); VCC2 supplies I/O ports (2.7 V to VCC1), enabling mixed-voltage interfacing |
| RESET | Active-low reset input | Asynchronous hardware reset with internal pull-up; initiates boot sequence and register initialization |
Key Features
| Feature | Design Value |
|---|---|
| Three-phase motor control | Dedicated hardware circuit synchronizes six PWM outputs with dead-time insertion and fault protection for BLDC/PMSM drives |
| IEBus interface | Integrated IEBus (NEC proprietary automotive bus) controller supports master/slave operation at 125 kbps for in-vehicle networks |
| Memory expansion mode | Enables external memory access up to 4 MB address space using dedicated address/data bus pins and WAIT control |
| Low-power operation | Stop mode draws only 0.7 µA at 3 V; wait mode retains RAM and register state while disabling CPU and clocks |
| Flash security | On-chip flash lock bits prevent unauthorized readout or reprogramming of user code and configuration data |
Applications
| Industrial Motor Drives | Office Equipment Control |
|---|---|
|
Use Scenario: Closed-loop speed and torque control of brushless DC motors in HVAC blowers and industrial pumps. IC Role / Device Role / Timing Role: Primary motion controller executing FOC algorithms, generating synchronized PWM, and managing current sensing via integrated A/D. Use Value: Eliminates need for external motor gate drivers and timing ICs; 26-channel A/D enables simultaneous phase current, temperature, and voltage monitoring. |
Use Scenario: Real-time coordination of paper feed, scanning, and print engine subsystems in multifunction printers. IC Role / Device Role / Timing Role: Central system controller handling IEBus communication with scanner module, UART with network interface, and D/A for analog sensor calibration. Use Value: Single-chip integration reduces BOM count and PCB area; memory expansion mode supports firmware updates via external SPI Flash. |
| Home Appliance UI Panels | Audio System Host Control |
|
Use Scenario: Touch-sensitive front-panel interface with LED backlight dimming and rotary encoder input in washing machines. IC Role / Device Role / Timing Role: User interface processor managing capacitive touch scan, PWM-controlled LED drivers, and serial communication with main MCU. Use Value: Dual 8-bit D/A outputs drive analog backlight control; 10-bit A/D reads potentiometer and thermistor inputs without external signal conditioning. |
Use Scenario: Source selection, volume leveling, and DSP parameter loading in multi-zone home audio receivers. IC Role / Device Role / Timing Role: Audio subsystem coordinator using I²C to configure DACs/ADCs and UART to relay commands from remote IR processor. Use Value: Integrated UART and I²C eliminate level-shifting components; 20 KB RAM buffers audio metadata and EQ presets during power transitions. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F100PLGSP#30 | RL78/G13 16-bit core, 128 KB Flash, 12 KB RAM, 64-pin LQFP, 32 MHz max, no IEBus or three-phase motor circuit | Lacks native IEBus and motor control hardware; requires external gate drivers and bus transceivers | Preferred for cost-sensitive, lower-complexity applications where software-based motor control suffices |
| MB9BF518RPMC | Fujitsu FM3 32-bit ARM Cortex-M3, 512 KB Flash, 64 KB RAM, 100-pin LQFP, includes motor control timers and CAN | Offers CAN interface and higher processing bandwidth but lacks IEBus and requires different toolchain and middleware | Recommended when CAN bus integration or future scalability to 32-bit architecture is required |
Compared with R5F100PLGSP#30 and MB9BF518RPMC, the M30624FGPGP#D5 delivers unique value in legacy IEBus-equipped automotive subsystems and cost-optimized three-phase motor control - retaining hardware acceleration unavailable in newer 16-bit alternatives and avoiding ARM licensing overhead present in 32-bit options.
Availability
M30624FGPGP#D5 is available at Aetrix Electronics and suitable for industrial motor drives, office equipment control, home appliance UI panels, and audio system host control requiring stable component supply and long-term lifecycle support.
Supply support for M30624FGPGP#D5 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader formed in 2010 through the merger of NEC Electronics and Renesas Technology, specializing in microcontrollers, analog, and power solutions.
The M16C/62P Group, including M30624FGPGP#D5, was designed for cost-effective, high-integration embedded control in industrial, office, and consumer equipment - emphasizing real-time responsiveness, mixed-signal capability, and legacy bus compatibility.
FAQ
What is the maximum operating frequency and corresponding supply voltage for M30624FGPGP#D5?
The M30624FGPGP#D5 supports a maximum operating frequency of 24 MHz at VCC1 = 3.3 V or 5.0 V, with minimum instruction execution time of 41.7 ns. At 10 MHz, it operates down to VCC1 = 2.7 V. The device's clock generation circuit includes PLL, on-chip oscillator, and main/subclock inputs to sustain timing integrity across voltage and temperature ranges.
Does M30624FGPGP#D5 support IEBus communication, and what is its implementation level?
Yes, M30624FGPGP#D5 integrates a full hardware IEBus controller compliant with NEC's IEBus standard (registered trademark), supporting both master and slave modes at 125 kbps. It handles protocol framing, arbitration, and error detection in silicon - eliminating software overhead and ensuring deterministic timing for automotive and industrial network nodes.
What Flash memory endurance and temperature grading apply to M30624FGPGP#D5?
M30624FGPGP#D5 carries Product Code D5, indicating lead-included packaging and -20°C to +85°C operating ambient temperature. Its Flash endurance is 1,000 write/erase cycles in user ROM area (excluding Block A and Block 1) and 10,000 cycles in Block A and Block 1 - validated per Renesas specification REJ03B0001-0241 Rev.2.41.
How does the three-phase motor control circuit in M30624FGPGP#D5 function?
The M30624FGPGP#D5 contains dedicated hardware for three-phase motor control, generating six complementary PWM outputs with programmable dead-time insertion, fault input monitoring (e.g., overcurrent), and synchronization to A/D conversion triggers. This enables direct driving of gate drivers in BLDC and PMSM applications without external timing logic.
Is M30624FGPGP#D5 pin-compatible with other members of the M16C/62P Group?
M30624FGPGP#D5 uses the 100-pin PLQP0100KB-A LQFP package shared with other 100-pin M16C/62P variants (e.g., M30622F8PGP, M30620FCPGP), and shares identical pin functions for power, reset, clocks, and core peripherals. However, I/O mapping for certain timers and serial interfaces varies by ROM size and variant - requiring schematic verification against the specific device's pin assignment table.
M30624FGPGP#D5 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 100-LQFP
- Series:
- M16C™ M16C/60/62P
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- M16C/60
- Core Size:
- 16-Bit
- Speed:
- 24MHz
- Connectivity:
- I2C, IEBus, UART/USART
- Peripherals:
- DMA, WDT
- Number of I/O:
- 85
- Program Memory Size:
- 256KB (256K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- 4K x 8
- RAM Size:
- 20K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.7V ~ 5.5V
- Data Converters:
- A/D 26x10b; D/A 2x8b
- Oscillator Type:
- Internal
- Operating Temperature:
- -20°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
M30624FGPGP#D5 FAQ
1.How can I place an order for M30624FGPGP#D5 through Aetrix?
Please submit a Request for Quotation (RFQ) for M30624FGPGP#D5 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for M30624FGPGP#D5 reliable?
The price and inventory of M30624FGPGP#D5 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for M30624FGPGP#D5 is usually 5 days.
3.What payment methods are accepted for M30624FGPGP#D5?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for M30624FGPGP#D5 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for M30624FGPGP#D5?
M30624FGPGP#D5 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your M30624FGPGP#D5 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for M30624FGPGP#D5?
For technical support, including M30624FGPGP#D5 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your M30624FGPGP#D5 requirements.
6.How does Aetrix verify that M30624FGPGP#D5 is sourced from the original manufacturer or authorized distributors?
All M30624FGPGP#D5 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that M30624FGPGP#D5 meets industry standards.
7.What is the process for return or replacement of M30624FGPGP#D5?
All M30624FGPGP#D5 units undergo pre-shipment inspection (PSI). If there is an issue with M30624FGPGP#D5, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The M30624FGPGP#D5 part is unused and in its original packaging.
Return procedure for M30624FGPGP#D5:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
M30624FGPGP#D5 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
