My Inquiry
My Account
Renesas M3062GF8NGP#U5
- Part No.:
- M3062GF8NGP#U5
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 100-LQFP
- Datasheet:
-
M3062GF8NGP#U5.pdf
- Description:
- IC MCU 16BIT 64KB FLASH 100LFQFP
- Quantity:
- Payment:
- Shipping:
Inventory:351
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
M3062GF8NGP#U5 from Renesas Electronics is a 16-bit Flash microcontroller in the M16C/62P Group, built on a silicon gate CMOS process with an M16C/60 Series CPU core. It features 256 KB + 4 KB Flash ROM, 20 KB RAM, operates at up to 24 MHz (41.7 ns min instruction time), and supports I²C, UART, IEBus, and 10-bit A/D conversion across 26 channels - used in industrial motor control and office equipment.
For engineers reviewing the M3062GF8NGP#U5 datasheet, M3062GF8NGP#U5 pinout, M3062GF8NGP#U5 application, or M3062GF8NGP#U5 equivalent, this page delivers verified technical context, package mapping, functional specifications, and real-world use cases for embedded control design and long-lifecycle industrial procurement.
Technical Context
The M3062GF8NGP#U5 implements a single-chip 16-bit architecture with memory expansion capability up to 4 Mbytes, five 16-bit Timer A channels, six 16-bit Timer B channels, and integrated three-phase motor control logic. Its clock system includes main/subclock generation circuits, on-chip oscillator, and PLL synthesizer with built-in feedback resistor.
It integrates dual 8-bit D/A converters, CCITT-CRC calculation circuit, two-channel DMAC, 15-bit watchdog timer with prescaler, and interrupt support with 7 priority levels (29 internal, 5 external sources). Power management includes wait mode (1.8 µA @ 3 V, 32 kHz) and stop mode (0.7 µA @ 3 V).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | M16C/60 Series 16-bit RISC-like core with 91 instructions and 1 Mbyte address space |
| Flash Memory | 256 KB user ROM + 4 KB block A; 1,000 program/erase cycles in user area, 10,000 in block A |
| RAM | 20 KB on-chip SRAM for data and stack storage in real-time control tasks |
| Operating Voltage | VCC1 = 3.0–5.5 V; supports 24 MHz operation at 3.3–5.5 V, enabling robust noise immunity in industrial environments |
| A/D Converter | 10-bit resolution, 26-channel multiplexed input for sensor interfacing in motor and power control systems |
| Package | 100-pin plastic LQFP (PLQP0100KB-A), RoHS-compliant lead-free, rated for −20°C to +85°C ambient |
| Peripherals | 3 serial interfaces (UART/I²C/IEBus), 2-channel DMAC, CRC-CCITT engine, and three-phase motor control circuit |
Pinout & Package
Package: 100-pin plastic LQFP (PLQP0100KB-A), 14 × 14 mm body, 0.5 mm pitch, RoHS-compliant lead-free finish.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VCC1 | Main supply voltage input | Power domain for CPU core and most peripherals; must be 3.0–5.5 V for full-speed 24 MHz operation |
| VCC2 | I/O supply voltage input | Independent I/O rail; tied to VCC1 per M16C/62P specification, enabling consistent logic levels across ports |
| XIN / XOUT | External crystal oscillator connection | Supports 1–20 MHz crystal for precise timing; internal feedback resistor enables standalone oscillation |
| XCIN / XCOUT | Sub-clock oscillator connection | Enables low-power 32.768 kHz RTC operation during wait/stop modes for energy-efficient timekeeping |
| INT0–INT4 | External interrupt inputs | Five dedicated edge-triggered interrupt pins for fast response to external events like encoder pulses or fault signals |
| P0–P9 | General-purpose I/O ports | 87 total I/O pins (8-bit ports P0–P6, P8–P9, plus P10); configurable as digital I/O, peripheral function, or analog input |
Key Features
| Feature | Design Value |
|---|---|
| Three-phase motor control circuit | Integrated hardware PWM generator with dead-time insertion and complementary output control for BLDC/PMSM drives |
| IEBus interface | Dedicated hardware IEBus (NEC proprietary automotive bus) controller supporting master/slave operation without CPU overhead |
| Programmable voltage detection | On-chip voltage monitor with selectable threshold (2.7–4.5 V) and interrupt output for brown-out protection and safe shutdown |
| Flash memory security | Block-level lock bits prevent unauthorized read/write access to user ROM and block A, supporting firmware IP protection |
| Low-power stop mode | 0.7 µA typical current draw at 3 V with RAM retention and wake-up via external interrupt or subclock event |
Applications
| Industrial Motor Control | Office Equipment |
|---|---|
Use Scenario: Closed-loop speed and torque control of brushless DC motors in HVAC blowers and industrial fans. IC Role / Device Role / Timing Role: Primary system controller executing PID algorithms, generating 6-channel complementary PWM, and monitoring current/voltage sensors via A/D. Use Value: Integrated three-phase motor control circuit eliminates external gate driver logic and reduces BOM count by 3–5 components. |
Use Scenario: Real-time document processing and paper path coordination in multifunction printers. IC Role / Device Role / Timing Role: Central MCU managing scanner image capture, print engine timing, and USB/Ethernet host interface via UART and I²C. Use Value: 24 MHz execution speed and 20 KB RAM enable concurrent handling of imaging buffers, motor control, and network stacks. |
| Home Appliance Control | Automotive Body Electronics |
Use Scenario: Smart washing machine drum motion, water level sensing, and detergent dispensing logic. IC Role / Device Role / Timing Role: Main control unit interfacing with pressure sensors (A/D), solenoid drivers (D/A), and user interface via I²C touch panel. Use Value: 26-channel A/D and dual 8-bit D/A allow direct analog sensor actuator control without external signal conditioning ICs. |
Use Scenario: Door module control for window lift, mirror adjustment, and interior lighting in passenger vehicles. IC Role / Device Role / Timing Role: Dedicated IEBus slave node communicating with body control module while managing local motor drivers and switch inputs. Use Value: Native IEBus hardware support ensures deterministic <100 µs response latency and eliminates software protocol stack overhead. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F100PLGSP#V0 | RL78/G13-based; lower power (120 µA/MHz), smaller Flash (128 KB), no IEBus, no three-phase motor circuit | Suitable for battery-powered sensors and simple UI control; lacks motor-specific peripherals | Select when migrating to newer RL78 platform with toolchain continuity and enhanced low-power requirements |
| M30624FGPGP#U5 | Same M16C/62P family; 256 KB + 4 KB Flash, 20 KB RAM, identical 100-pin LQFP package and peripheral set | Mask ROM version replaced by Flash; same industrial temperature range and pinout | Choose for legacy design refresh where Flash reprogrammability replaces mask ROM, with zero PCB change |
Compared with R5F100PLGSP#V0, M3062GF8NGP#U5 provides native IEBus and three-phase motor control essential for automotive body modules and industrial drives; compared with M30624FGPGP#U5, it offers identical functionality with updated product code reflecting RoHS-compliant lead-free packaging and extended endurance grading.
Availability
M3062GF8NGP#U5 is available at Aetrix Electronics and suitable for industrial motor control, office equipment, home appliance, and automotive body electronics requiring stable component supply over extended production lifecycles.
Supply support for M3062GF8NGP#U5 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation, formed in 2010 from the merger of NEC Electronics and Renesas Technology, designs high-reliability microcontrollers for industrial, automotive, and consumer applications.
The M16C/62P Group was engineered for cost-sensitive, real-time embedded control in motor-driven systems and office automation, emphasizing peripheral integration, Flash flexibility, and wide operating temperature support.
FAQ
What is the maximum operating frequency and corresponding supply voltage requirement for M3062GF8NGP#U5?
M3062GF8NGP#U5 achieves a maximum operating frequency of 24 MHz, requiring VCC1 between 3.3 V and 5.5 V. At 10 MHz, it supports down to 2.7 V. This dual-voltage flexibility allows deployment in both 3.3 V and 5 V industrial systems without level-shifting components. The M3062GF8NGP#U5 datasheet specifies 41.7 ns minimum instruction execution time under 24 MHz conditions.
Does M3062GF8NGP#U5 support in-circuit programming and what are its Flash endurance specifications?
Yes, M3062GF8NGP#U5 supports in-system programming via on-chip debug interface. Its Flash memory offers 1,000 program/erase cycles for user ROM areas excluding block A and block 1, and 10,000 cycles for block A and block 1 - critical for field firmware updates in industrial controllers. The M3062GF8NGP#U5 product code U5 confirms lead-free RoHS compliance and −20°C to +85°C operation.
Which communication interfaces are hardware-implemented on M3062GF8NGP#U5 and how many channels does each support?
M3062GF8NGP#U5 integrates three hardware serial interfaces: one UART channel, one I²C bus channel, and one IEBus channel - all clock-synchronous and independently configurable. Additionally, it supports two extra clock-synchronous serial I/O channels. This enables simultaneous communication with displays (I²C), body control modules (IEBus), and PC hosts (UART) without software bit-banging. The M3062GF8NGP#U5 block diagram confirms dedicated peripheral logic for each interface.
What is the A/D converter configuration of M3062GF8NGP#U5 and how is it utilized in motor control applications?
M3062GF8NGP#U5 includes a single 10-bit A/D converter with up to 26 input channels, configurable for sequential or group scanning. In motor control, these channels directly sample phase currents, DC bus voltage, and thermistor readings - feeding real-time feedback to PID routines executed by the M16C/60 CPU core. The M3062GF8NGP#U5's 26-channel capability eliminates external multiplexers in multi-sensor BLDC systems.
Is M3062GF8NGP#U5 pin-compatible with other members of the M16C/62P family and what package does it use?
Yes, M3062GF8NGP#U5 uses the PLQP0100KB-A 100-pin LQFP package and shares identical pinout with all M16C/62P 100-pin variants (e.g., M30622F8PGP, M30620FCPGP). This enables drop-in replacement within the same package footprint. The M3062GF8NGP#U5 marking "GP" explicitly denotes the 100-pin LQFP variant, and its product code "U5" confirms lead-free RoHS compliance and −20°C to +85°C rating.
M3062GF8NGP#U5 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 100-LQFP
- Series:
- M16C™ M16C/60
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- M16C/60
- Core Size:
- 16-Bit
- Speed:
- 10MHz
- Connectivity:
- SIO, UART/USART
- Peripherals:
- DMA, WDT
- Number of I/O:
- 85
- Program Memory Size:
- 64KB (64K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 8K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.7V ~ 3.6V
- Data Converters:
- A/D 10x10b; D/A 2x8b
- Oscillator Type:
- Internal
- Operating Temperature:
- -20°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
M3062GF8NGP#U5 FAQ
1.How can I place an order for M3062GF8NGP#U5 through Aetrix?
Please submit a Request for Quotation (RFQ) for M3062GF8NGP#U5 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for M3062GF8NGP#U5 reliable?
The price and inventory of M3062GF8NGP#U5 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for M3062GF8NGP#U5 is usually 5 days.
3.What payment methods are accepted for M3062GF8NGP#U5?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for M3062GF8NGP#U5 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for M3062GF8NGP#U5?
M3062GF8NGP#U5 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your M3062GF8NGP#U5 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for M3062GF8NGP#U5?
For technical support, including M3062GF8NGP#U5 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your M3062GF8NGP#U5 requirements.
6.How does Aetrix verify that M3062GF8NGP#U5 is sourced from the original manufacturer or authorized distributors?
All M3062GF8NGP#U5 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that M3062GF8NGP#U5 meets industry standards.
7.What is the process for return or replacement of M3062GF8NGP#U5?
All M3062GF8NGP#U5 units undergo pre-shipment inspection (PSI). If there is an issue with M3062GF8NGP#U5, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The M3062GF8NGP#U5 part is unused and in its original packaging.
Return procedure for M3062GF8NGP#U5:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
M3062GF8NGP#U5 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
