My Inquiry
My Account
Renesas M30853FJFP#U3
- Part No.:
- M30853FJFP#U3
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 100-BQFP
- Datasheet:
-
M30853FJFP#U3.pdf
- Description:
- IC MCU 16/32B 512KB FLASH 100QFP
- Quantity:
- Payment:
- Shipping:
Inventory:2,044
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
M30853FJFP#U3 from Renesas Electronics is a 16/32-bit CMOS microcontroller in the M32C/85 group, featuring the M32C/80 series CPU core, 512 KB Flash memory, 100-pin LQFP package, and dual CAN 2.0B modules - designed for real-time control in automotive body electronics, industrial motor drives, and office automation equipment.
For engineers reviewing the M30853FJFP#U3 datasheet, M30853FJFP#U3 pinout, M30853FJFP#U3 application, or M30853FJFP#U3 equivalent, key selection criteria include its 32 MHz max BCLK operation at 4.2–5.5 V, 10-bit 26-channel A/D converter, 8-channel intelligent I/O with waveform generation, and support for IEBus, I²C, and five serial I/O channels.
Technical Context
The M30853FJFP#U3 implements a high-efficiency 16/32-bit RISC-like architecture with 108 basic instructions and minimum 31.3 ns instruction execution time at 32 MHz. Its on-chip peripherals include two independent CAN 2.0B controllers, a 4-channel DMAC with chain/transfer modes, and a CRC-CCITT calculation circuit for protocol integrity.
It integrates four clock generation circuits - main crystal oscillator (XIN/XOUT), sub-crystal oscillator (XCIN/XCOUT), on-chip oscillator, and PLL frequency synthesizer - enabling flexible system timing with external crystal or ceramic resonator support and main clock oscillation stop detection.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | M32C/80 series 16/32-bit RISC-like core with 108 instructions |
| Max Operating Frequency | 32 MHz BCLK (31.3 ns min instruction time) at VCC1 = 4.2–5.5 V |
| Memory | 512 KB Flash (programmable at 3.3 V ±0.3 V or 5.0 V ±0.5 V), 16 MB address space |
| Analog Peripherals | 10-bit A/D converter: 1 circuit, 26 input channels; 8-bit D/A: 2 channels |
| Serial Interfaces | 5 serial I/O channels: UART, clock-synchronous/asynchronous, IEBus, I²C bus |
| CAN Interface | 2 independent CAN 2.0B-compliant modules with dedicated TX/RX pins per channel |
| Package | 100-pin plastic LQFP (PLQP0100KB-A, 14 × 14 mm, 0.5 mm pitch) |
| Operating Temp | –20 °C to +85 °C (industrial grade, Standard quality level) |
Pinout & Package
Package: 100-pin plastic LQFP (PLQP0100KB-A), 14 mm × 14 mm, 0.5 mm pitch, exposed pad not specified.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| P00–P07 | Port 0 I/O with analog input | 8-bit bidirectional port; P00–P07 support AN0–AN7 analog inputs and digital I/O |
| P60–P67 | Serial interface control | UART0/1 control (CTS0/RTS0, CLK0, TxD0/RxD0), I²C (SCL0/SDA0), and SS0/SS1 |
| P70/P71 | N-channel open-drain I/O | Support TA0OUT/TA0IN, TxD2/RxD2, SDA2/SCL2, and intelligent I/O functions |
| P82/P83 | CAN0 transceiver interface | CAN0OUT and CAN0IN pins - direct connection to external CAN transceiver required |
| P94–P97 | CAN1 & serial interface | CAN1WU, CAN1IN, CAN1OUT, plus SRxD4/STxD4/SCL4/SDA4 for secondary CAN and I²C |
| XIN/XOUT | Main system clock input/output | Connects to external crystal or ceramic resonator (1–20 MHz typical) for primary timing source |
| RESET | Active-low reset input | Asynchronous hardware reset; internal pull-up; compatible with external reset ICs |
Key Features
| Feature | Design Value |
|---|---|
| Dual CAN 2.0B Modules | Enables redundant or multi-node vehicle network communication without external controllers |
| Intelligent I/O (8 channels) | Hardware-accelerated time measurement and PWM waveform generation offloads CPU |
| 4-Channel DMAC II | Supports immediate, calculation, and chain transfers - critical for high-throughput sensor/data streaming |
| IEBus & I²C Integration | Direct support for NEC's IEBus (automotive infotainment) and standard I²C (sensor/EEPROM interfacing) |
| On-Chip PLL Synthesizer | Generates stable high-frequency clocks from low-frequency crystals - reduces EMI and board space |
| Voltage Detection Option | Configurable brown-out detection (optional) enhances reliability in fluctuating supply environments |
Applications
| Automotive Body Control | Industrial Motor Drive |
|---|---|
Use Scenario: Central body controller managing door locks, window lifts, lighting, and mirror adjustment in mid-tier vehicles. IC Role / Device Role / Timing Role: Real-time deterministic MCU coordinating CAN-based actuator commands and analog sensor feedback (e.g., potentiometer position, current sense). Use Value: Dual CAN interfaces enable simultaneous communication with powertrain and comfort networks; 26-channel A/D supports multi-sensor monitoring without external muxing. | Use Scenario: Closed-loop control of 3-phase BLDC motors in HVAC blowers or conveyor systems. IC Role / Device Role / Timing Role: Primary motion controller executing FOC algorithms, generating PWM via intelligent I/O, and sampling current/voltage via 10-bit A/D. Use Value: Hardware timer A/B (16-bit × 11 channels) and three-phase motor control circuit simplify gate driver timing and commutation sequencing. |
| Office Equipment Control | Communications Terminal |
Use Scenario: Mainboard controller in multifunction printers handling paper path sensors, stepper drivers, and panel UI. IC Role / Device Role / Timing Role: System coordinator interfacing with ASICs, managing flash firmware updates, and processing button/keypad inputs. Use Value: 512 KB Flash enables field-upgradable feature sets; IEBus support allows legacy peripheral integration (e.g., scanner modules). | Use Scenario: Embedded controller in VoIP desk phones or SIP terminals managing audio codec, keypad, display, and Ethernet MAC interface. IC Role / Device Role / Timing Role: Peripheral manager handling UART (to codec), I²C (to display/backlight), and GPIO (for LED indicators and hook switch). Use Value: Five serial I/O channels allow concurrent use of UART, I²C, and synchronous serial for audio data - eliminating need for bridge ICs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F566TEADFP#30 | 32-bit RX66T core, 120 MHz, 512 KB Flash, 100-pin LQFP - no native IEBus, adds FPU and enhanced PWM | Better suited for high-speed motor control (e.g., servo drives); lacks IEBus for legacy automotive peripherals | Select when migrating to modern RX architecture with higher compute throughput and safety features (IEC 61508 SIL2-ready) |
| MB9BF526KPMC-G-SNE2 | 32-bit FM4 core, 144 MHz, 512 KB Flash, 100-pin LQFP - includes USB FS, SDIO, but no CAN 2.0B | Targets connectivity-rich applications (e.g., IoT gateways); missing dual CAN limits automotive/industrial use | Choose for designs requiring USB host/device or SD card interface where CAN is handled externally or omitted |
Compared with M30853FJFP#U3, the R5F566TEADFP#30 offers significantly higher performance and functional safety readiness but requires software migration and loses IEBus compatibility; the MB9BF526KPMC-G-SNE2 provides richer connectivity yet omits CAN entirely - making M30853FJFP#U3 uniquely balanced for cost-sensitive, CAN+IEBus embedded control.
Availability
M30853FJFP#U3 is available at Aetrix Electronics and suitable for automotive body electronics, industrial motor drives, and office equipment requiring stable component supply across long-lifecycle production programs.
Supply support for M30853FJFP#U3 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader formed in 2010 through the merger of NEC Electronics and Renesas Technology, specializing in microcontrollers, analog, and power solutions.
The M32C/85 group was engineered for cost-effective, real-time embedded control in automotive, industrial, and consumer equipment - emphasizing integrated peripherals (CAN, IEBus, intelligent timers) and Flash programmability for field updates.
FAQ
What is the maximum operating frequency and voltage range for the M30853FJFP#U3?
The M30853FJFP#U3 operates at up to 32 MHz BCLK with a minimum instruction execution time of 31.3 ns when supplied at VCC1 = 4.2 V to 5.5 V. It supports reduced-speed operation at 24 MHz down to VCC1 = 3.0 V. The device uses separate VCC1 (core/I/O) and VCC2 (I/O only) supplies, both rated 3.0–5.5 V, with VCC2 ≤ VCC1.
Does the M30853FJFP#U3 support CAN FD or only classical CAN 2.0B?
The M30853FJFP#U3 supports CAN 2.0B only - it does not implement CAN FD. Both CAN modules comply strictly with ISO 11898-1:2003 (Classical CAN), supporting message IDs up to 29 bits and data lengths up to 8 bytes. CAN FD frame format, bit-rate switching, and extended payload are not present in this silicon.
How many analog input channels does the M30853FJFP#U3 provide, and what is the resolution?
The M30853FJFP#U3 integrates a single 10-bit successive-approximation A/D converter with 26 analog input channels (AN0–AN25). Input selection is software-controlled via register configuration, and conversion can be triggered by internal timers, external pins, or software - enabling precise sensor sampling in motor control and environmental monitoring.
Is the M30853FJFP#U3 pin-compatible with other members of the M32C/85 family?
Yes - the M30853FJFP#U3 shares the same 100-pin LQFP (PLQP0100KB-A) footprint and pinout with all M32C/85 variants in the 100-pin package, including mask ROM and Flash versions with different memory sizes (e.g., M30852FJFP#U3, M30854FJFP#U3). Signal mapping, power, and reset pins are identical across this package variant.
What development tools and debug interfaces are supported for the M30853FJFP#U3?
The M30853FJFP#U3 supports on-chip debugging via the on-chip debug emulator (OCDE) interface using Renesas E1/E20 emulators. It is fully compatible with CS+ (formerly CubeSuite+) IDE, allowing full C/C++ debugging, Flash programming, and real-time trace. No JTAG port is present - debugging relies on the dedicated ISP/OCDE pins (e.g., ISP, USP, FLG).
M30853FJFP#U3 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 100-BQFP
- Series:
- M16C™ M32C/80/85
- Packaging:
- Tray
- Product Status:
- Not For New Designs
- Programmable:
- Not Verified
- Core Processor:
- M32C/80
- Core Size:
- 16/32-Bit
- Speed:
- 32MHz
- Connectivity:
- CANbus, I2C, IEBus, SIO, UART/USART
- Peripherals:
- DMA, WDT
- Number of I/O:
- 85
- Program Memory Size:
- 512KB (512K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- 4K x 8
- RAM Size:
- 24K x 8
- Voltage - Supply (Vcc/Vdd):
- 3V ~ 5.5V
- Data Converters:
- A/D 26x10b; D/A 2x8b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
M30853FJFP#U3 FAQ
1.How can I place an order for M30853FJFP#U3 through Aetrix?
Please submit a Request for Quotation (RFQ) for M30853FJFP#U3 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for M30853FJFP#U3 reliable?
The price and inventory of M30853FJFP#U3 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for M30853FJFP#U3 is usually 5 days.
3.What payment methods are accepted for M30853FJFP#U3?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for M30853FJFP#U3 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for M30853FJFP#U3?
M30853FJFP#U3 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your M30853FJFP#U3 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for M30853FJFP#U3?
For technical support, including M30853FJFP#U3 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your M30853FJFP#U3 requirements.
6.How does Aetrix verify that M30853FJFP#U3 is sourced from the original manufacturer or authorized distributors?
All M30853FJFP#U3 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that M30853FJFP#U3 meets industry standards.
7.What is the process for return or replacement of M30853FJFP#U3?
All M30853FJFP#U3 units undergo pre-shipment inspection (PSI). If there is an issue with M30853FJFP#U3, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The M30853FJFP#U3 part is unused and in its original packaging.
Return procedure for M30853FJFP#U3:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
M30853FJFP#U3 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
