Renesas M3455AG8FP#U0
- Part No.:
- M3455AG8FP#U0
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- -
- Datasheet:
-
M3455AG8FP#U0.pdf
- Description:
- MCU, 4-BIT
- Quantity:
- Payment:

- Shipping:

Inventory:476
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
M3455AG8FP#U0 from Renesas Electronics is a 4-bit CMOS single-chip microcomputer with 8192-word QzROM, 512-word RAM, integrated LCD controller (32 segments × 4 commons), and three timers (two 8-bit, one 16-bit). It operates from 1.8 to 5.5 V, achieves 0.5 µs minimum instruction execution at 6 MHz, and targets ultra-low-power remote control transmitters.
For engineers reviewing the M3455AG8FP#U0 datasheet, M3455AG8FP#U0 pinout, M3455AG8FP#U0 application, or M3455AG8FP#U0 equivalent, key selection considerations include its PLQP0052JA-A 52-pin LQFP package, dual-clock support (ceramic resonator + 32.768 kHz quartz), voltage drop detection (reset at 1.7 V), and 24-key-on wakeup I/O pins for battery-powered IR remotes.
Technical Context
The M3455AG8FP#U0 implements the 4500 Series CPU core with 138 basic instructions and supports four clock sources: high-speed on-chip oscillator, ceramic-resonator-based main clock (XIN/XOUT), quartz-based sub-clock (XCIN/XCOUT), and low-speed on-chip oscillator. System clock selection is controlled via the 4-bit MR register with 16 configurable modes.
Its peripheral set includes Timer 1 (8-bit with reload and carrier wave auto-control), Timer 2 (8-bit with two reload registers and carrier wave generation), Timer 3 (16-bit fixed-division clock counter), and Timer LC (4-bit LCD clock generator). The LCD controller supports 1/2 or 1/3 bias and 2–4 duty drive with internal resistor options (r = 100 kΩ typical).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | 4500 Series 4-bit architecture with 138 instructions and 0.5 µs min. instruction time at 6 MHz |
| Memory | 8192 words × 10-bit QzROM + 512 words × 4-bit RAM (includes 32 words LCD display RAM) |
| Supply Voltage | 1.8 to 5.5 V - supports wide battery range including single-cell Li-ion or alkaline stacks |
| Timers | Three independent timers: Timer 1 (8-bit event counter/PWM), Timer 2 (8-bit carrier wave), Timer 3 (16-bit clock count) |
| LCD Driver | 32 segment × 4 common outputs with selectable 1/2 or 1/3 bias and 2–4 duty drive |
| Power Consumption | 0.3 mA active (3 V, 4 MHz), 5 µA clock operating mode (32 kHz), 0.1 µA RAM backup |
| Operating Temp | -20 to +85 °C - qualified for consumer and industrial remote control environments |
Pinout & Package
Package: 52-pin plastic LQFP (PLQP0052JA-A), 10 mm × 10 mm, 0.65 mm pitch, exposed pad not specified.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD / VSS | Power supply rails | Single-supply operation; CNVSS must be tied to VSS; VDCE enables voltage-drop detection |
| XIN / XOUT | Main clock interface | Supports ceramic resonator (4–6 MHz); internal feedback resistor eliminates external component |
| XCIN / XCOUT | Sub-clock interface | 32.768 kHz quartz crystal input/output; also serve as D6/D7 I/O ports with key-on wakeup |
| D0–D5, P00–P33 | Configurable I/O ports | 24 total pins with software-selectable N-channel open-drain/CMOS output, pull-up, and key-on wakeup |
| SEG0–SEG31 / COM0–COM3 | LCD driver outputs | Direct drive of 32-segment × 4-common LCD; SEG0–SEG2 double as VLC power pins |
| C/CNTR | Timer control I/O | CMOS output port; doubles as timer 1 event counter input or timer 2 PWM output |
| RESET | Open-drain reset I/O | Active-low reset output during POR, watchdog timeout, or voltage drop; accepts external reset input |
Key Features
| Feature | Design Value |
|---|---|
| Integrated LCD controller | Eliminates external driver IC for 32×4 LCDs in remote controls, reducing BOM cost and PCB area |
| Dual clock domain support | Enables simultaneous high-speed processing (XIN) and ultra-low-power real-time clock (XCIN @ 32.768 kHz) |
| 24-key-on wakeup pins | Allows full keypad wake from standby without external logic, extending battery life in IR transmitters |
| Voltage drop detection | Provides precise brown-out reset (1.7 V typ.) and skip function (2.0 V typ.) for stable low-voltage operation |
| Four interrupt sources | Supports nested 1-level interrupts and 8-level subroutine nesting for responsive key and timer event handling |
Applications
| IR Remote Control Transmitter | Low-Power Consumer Remote |
|---|---|
Use Scenario: Battery-powered infrared remote for TVs, air conditioners, or set-top boxes requiring long shelf life and reliable button response. IC Role / Device Role / Timing Role: Primary MCU executing IR protocol encoding, scanning 24-key matrix, driving 32-segment LCD status display, and managing sleep/wake cycles. Use Value: Integrated LCD driver and 24-key-on-wakeup capability eliminate discrete components, reducing system cost by ~$0.15 and enabling coin-cell operation for >1 year. | Use Scenario: Compact universal remote with multi-device support and on-screen menu navigation via segmented LCD. IC Role / Device Role / Timing Role: Central controller handling IR learning, EEPROM storage, LCD refresh timing (via Timer LC), and low-power RTC using 32.768 kHz sub-clock. Use Value: Dual-clock architecture allows concurrent 4 MHz processing and 32 kHz RTC with 5 µA clock-operating current, extending battery life beyond 24 months. |
| Industrial Remote Panel | Appliance Control Keypad |
Use Scenario: Ruggedized remote for HVAC or lighting control in commercial buildings with temperature extremes (-20 to 85 °C). IC Role / Device Role / Timing Role: Robust MCU managing environmental sensor inputs, IR transmission, LCD contrast adjustment, and brown-out recovery across wide voltage (1.8–5.5 V). Use Value: Wide VDD range and -20 to +85 °C rating ensure reliable operation across battery discharge and ambient temperature swings without derating. | Use Scenario: Embedded keypad on microwave ovens or washing machines requiring tactile feedback and status display. IC Role / Device Role / Timing Role: Dedicated keypad/LCD controller interfacing mechanical switches, driving 4-common LCD, and generating carrier wave (via Timer 2) for IR blaster. Use Value: Built-in carrier wave generation circuit offloads timing-critical IR modulation from firmware, simplifying code and improving signal consistency. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 4-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| RL78/L12 | 16-bit RL78 core, 16 KB flash, 2 KB RAM, integrated segment LCD driver (40×4), higher performance but larger footprint | Targets next-gen remotes needing firmware updates, more complex UI, or enhanced security features | Select when migrating from 4-bit to 16-bit for scalability; requires PCB redesign due to different package and pinout |
| HD6417028 | 4-bit μCOM-74 family device, 8 KB ROM, no integrated LCD driver, requires external segment driver IC | Suitable for legacy remote designs where LCD functionality is handled externally or omitted | Choose only if maintaining compatibility with existing HD6417028-based layouts; lacks voltage drop detection and key-on wakeup integration |
Compared with RL78/L12 and HD6417028, the M3455AG8FP#U0 delivers optimal cost-performance balance for fixed-function IR remotes by integrating LCD drive, key-scan, and low-power timing in a single 52-pin LQFP-eliminating external drivers while retaining proven 4-bit efficiency and qualification for consumer temperature ranges.
Availability
M3455AG8FP#U0 is available at Aetrix Electronics and suitable for IR remote control transmitters, low-power consumer remotes, industrial remote panels, and appliance control keypads requiring stable component supply and long-term lifecycle support.
Supply support for M3455AG8FP#U0 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader formed in 2010 through the merger of NEC Electronics and Renesas Technology, specializing in microcontrollers, analog, and power solutions.
The 455A Group microcontrollers, including M3455AG8FP#U0, were designed specifically for ultra-low-power, cost-sensitive remote control applications with integrated LCD and key-scan functionality.
FAQ
What is the maximum operating frequency supported by the M3455AG8FP#U0?
The M3455AG8FP#U0 achieves a minimum instruction execution time of 0.5 µs when operating at 6 MHz oscillation frequency in high-speed through-mode. Its system clock can be derived from multiple sources-including an external 4–6 MHz ceramic resonator (XIN/XOUT), a 32.768 kHz quartz crystal (XCIN/XCOUT), or internal high/low-speed oscillators-with configurable division ratios via the MR register. The 6 MHz limit applies specifically to the external main clock path.
Does the M3455AG8FP#U0 support external memory expansion?
No, the M3455AG8FP#U0 does not support external memory expansion. It integrates 8192 words × 10-bit QzROM and 512 words × 4-bit RAM (including 32 words dedicated to LCD display RAM) on-die. All program execution and data storage occur within this fixed internal memory map, consistent with its design as a self-contained 4-bit microcontroller for compact remote control applications.
How many LCD segments and commons can the M3455AG8FP#U0 drive directly?
The M3455AG8FP#U0 drives up to 32 segment outputs (SEG0–SEG31) and 4 common outputs (COM0–COM3) directly. It supports 1/2-bias (using COM0/COM1), 1/3-bias (COM0–COM2), or 1/4-bias (COM0–COM3) configurations with 2-, 3-, or 4-duty drive. Internal resistors (r = 100 kΩ typical) enable simple bias network implementation without external components.
Can the M3455AG8FP#U0 operate from a single 1.8 V supply?
Yes, the M3455AG8FP#U0 operates from 1.8 to 5.5 V, and full functionality-including 0.5 µs instruction execution-is guaranteed at 1.8 V when using appropriate clock sources (e.g., low-speed on-chip oscillator or 32.768 kHz sub-clock). At 1.8 V, active current drops to ~0.15 mA (typ.), making it suitable for single-cell lithium or NiMH battery operation in space-constrained remotes.
What packaging and RoHS compliance status does the M3455AG8FP#U0 have?
The M3455AG8FP#U0 is supplied in a 52-pin plastic LQFP package (PLQP0052JA-A, 10 mm × 10 mm, 0.65 mm pitch) and complies with the EU RoHS Directive. Renesas confirms environmental compatibility per applicable regulations; no lead, mercury, cadmium, hexavalent chromium, PBB, or PBDE substances exceed RoHS threshold limits. Full compliance documentation is available through Renesas sales offices.
M3455AG8FP#U0 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- -
- Series:
- *
- Packaging:
- Bulk
- Product Status:
- Active
- Programmable:
- Not Verified
- Core Processor:
- -
- Core Size:
- -
- Speed:
- -
- Connectivity:
- -
- Peripherals:
- -
- Number of I/O:
- -
- Program Memory Size:
- -
- Program Memory Type:
- -
- EEPROM Size:
- -
- RAM Size:
- -
- Voltage - Supply (Vcc/Vdd):
- -
- Data Converters:
- -
- Oscillator Type:
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
M3455AG8FP#U0 FAQ
1.How can I place an order for M3455AG8FP#U0 through Aetrix?
Please submit a Request for Quotation (RFQ) for M3455AG8FP#U0 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for M3455AG8FP#U0 reliable?
The price and inventory of M3455AG8FP#U0 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for M3455AG8FP#U0 is usually 5 days.
3.What payment methods are accepted for M3455AG8FP#U0?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for M3455AG8FP#U0 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for M3455AG8FP#U0?
M3455AG8FP#U0 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your M3455AG8FP#U0 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for M3455AG8FP#U0?
For technical support, including M3455AG8FP#U0 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your M3455AG8FP#U0 requirements.
6.How does Aetrix verify that M3455AG8FP#U0 is sourced from the original manufacturer or authorized distributors?
All M3455AG8FP#U0 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that M3455AG8FP#U0 meets industry standards.
7.What is the process for return or replacement of M3455AG8FP#U0?
All M3455AG8FP#U0 units undergo pre-shipment inspection (PSI). If there is an issue with M3455AG8FP#U0, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The M3455AG8FP#U0 part is unused and in its original packaging.
Return procedure for M3455AG8FP#U0:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
M3455AG8FP#U0 Tags

-
ATTINY4-TSHR
Microchip Technology

-
ATTINY10-TSHR
Microchip Technology

-
ATTINY10-TS8R
Microchip Technology

-
ATTINY202-SSNR
Microchip Technology

-
ATTINY202-SSFR
Microchip Technology

-
ATTINY402-SSNR
Microchip Technology

-
PIC16F15213T-I/MF
Microchip Technology

-
PIC16F15213-E/MF
Microchip Technology

-
PIC10F200T-I/OT
Microchip Technology

-
ATTINY412-SSNR
Microchip Technology

-
PIC10F202T-I/OT
Microchip Technology

-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…

