My Inquiry
My Account
STMicroelectronics M74HC109RM13TR
- Part No.:
- M74HC109RM13TR
- Manufacturer:
- STMicroelectronics
- Category:
- Flip Flops
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
M74HC109RM13TR.pdf
- Description:
- IC FF JK TYPE DUAL 1BIT 16SOP
- Quantity:
- Payment:
- Shipping:
Inventory:2,885
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
M74HC109RM13TR from STMicroelectronics is a high-speed CMOS dual J-K flip-flop with asynchronous preset and clear, operating from 2V to 6V supply, delivering 67MHz max clock frequency (typ.) at 6V, ±4mA output drive, and 2µA max quiescent current at 25°C - used in synchronous logic control, state machines, and clock-domain synchronization in industrial PLCs.
For engineers reviewing the M74HC109RM13TR datasheet, M74HC109RM13TR pinout, M74HC109RM13TR application, or M74HC109RM13TR equivalent, key selection criteria include asynchronous set/reset timing margins, propagation delay symmetry (tPLH ≅ tPHL), noise immunity (28% VCC min), and TSSOP-16 package compatibility with high-density PCB layouts.
Technical Context
The device implements two independent edge-triggered J-K flip-flops with active-low asynchronous preset (1PR/2PR) and clear (1CLR/2CLR), each responding to the rising edge of its dedicated clock input (1CK/2CK). Logic state transitions follow standard J-K truth table behavior including toggle, hold, set, and reset modes.
All inputs feature silicon-gate C2MOS protection against ESD and transient overvoltage; outputs exhibit symmetrical sourcing/sinking capability (|IOH| = IOL ≥ 4mA) and balanced propagation delays (tPLH/tPHL ≤ 38ns at VCC = 6V, TA = –55°C to 125°C).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Supply Voltage Range | 2V to 6V - supports mixed-voltage system interfacing and battery-powered operation down to 2V logic levels |
| Max Clock Frequency | 67MHz (typ. at VCC = 6V) - enables high-throughput sequential logic in data path controllers |
| Output Drive Strength | ±4mA (min) - sufficient to drive multiple 74HC inputs or small capacitive loads without buffering |
| Propagation Delay (CK→Q) | 13ns (min) / 38ns (max) at VCC = 6V - ensures deterministic timing for setup/hold-critical state registers |
| Quiescent Supply Current | 2µA (max at TA = 25°C) - minimizes standby power in always-on control subsystems |
| Noise Immunity | VNIH/VNIL = 28% VCC (min) - rejects common-mode noise on control lines in electrically noisy environments |
| Operating Temperature | –55°C to +125°C - qualified for extended industrial and automotive under-hood applications |
Pinout & Package
TSSOP-16 package: 4.9mm × 6.4mm body, 0.65mm pitch, thin-profile surface-mount construction optimized for automated assembly and thermal performance in compact designs.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 15 | 1CLR, 2CLR | Active-low asynchronous reset - forces Q = L, Q̄ = H independent of clock or J/K state |
| 2, 14, 3, 13 | 1J, 2J, 1K, 2K | Synchronous data inputs - define next-state logic per J-K truth table on rising clock edge |
| 4, 12 | 1CK, 2CK | Positive-edge-triggered clock - initiates state evaluation and update only on rising transition |
| 5, 11 | 1PR, 2PR | Active-low asynchronous preset - forces Q = H, Q̄ = L regardless of clock or J/K |
| 6, 10 | 1Q, 2Q | True outputs - provide registered logic state after clock edge or async control assertion |
| 7, 9 | 1Q̄, 2Q̄ | Complement outputs - deliver inverted registered state for differential signaling or feedback paths |
| 8 | GND | Ground reference - return path for all internal logic and I/O currents |
| 16 | VCC | Positive supply - powers internal C2MOS circuitry and establishes logic threshold references |
Key Features
| Feature | Design Value |
|---|---|
| Pin-compatible with 74LS109 | Enables drop-in upgrade from bipolar TTL logic without PCB redesign or netlist changes |
| Symmetrical output impedance | Ensures matched rise/fall times and reduced signal distortion in clocked bus interfaces |
| Balanced propagation delays | tPLH ≅ tPHL minimizes duty-cycle degradation when cascading multiple stages |
| Wide voltage operation (2–6V) | Supports direct interface with 3.3V microcontrollers and 5V legacy peripherals |
| High noise immunity | 28% VCC noise margin prevents spurious triggering in motor-drive or relay-control environments |
Applications
| Industrial PLC Sequencers | Digital Power Supply Controllers |
|---|---|
Use Scenario: Implementing multi-step sequencing logic for solenoid valve actuation and sensor feedback loops in modular I/O racks. IC Role / Device Role / Timing Role: Dual J-K flip-flop provides synchronized state storage and transition control with independent preset/clear for emergency stop recovery. Use Value: Asynchronous reset ensures immediate fault clearance; 125°C rating sustains reliability in cabinet-mounted control units. | Use Scenario: Managing PWM phase alignment and soft-start state progression in isolated DC-DC modules with digital supervision. IC Role / Device Role / Timing Role: Registers control bits for mode selection and fault latching, triggered by controller GPIO edges. Use Value: 2µA quiescent current extends standby runtime; 67MHz fMAX accommodates fast-loop diagnostic sampling. |
| Automotive Body Control Modules | Test Equipment Pattern Generators |
Use Scenario: Storing door lock status and window position states across ignition cycles in centralized body electronics units. IC Role / Device Role / Timing Role: Edge-triggered storage element captures switch events while async preset initializes known safe state on power-up. Use Value: –55°C to 125°C operation meets AEC-Q100 Grade 1 requirements; TSSOP-16 fits constrained under-dash space. | Use Scenario: Generating precise, repeatable stimulus waveforms for IC functional validation using FPGA-synchronized clocks. IC Role / Device Role / Timing Role: Synchronizes pattern step advancement and resets test counters via gated clock edges. Use Value: Propagation delay matching (tPLH ≅ tPHL) preserves waveform symmetry; 50pF load AC specs ensure timing predictability. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual J-K flip-flop applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SN74HC109PWR | Same logic function, identical AC/DC specs, but in 16-pin TSSOP with different moisture sensitivity level (MSL3 vs MSL1) | Requires requalification for humidity-sensitive reflow processes in high-reliability manufacturing | Select when TI-sourced supply chain alignment is required and MSL3 handling infrastructure exists |
| 74AHC109PW,118 | Higher speed (fMAX = 125MHz typ.), lower propagation delay (10ns max), but higher ICC (40µA max) and narrower VCC range (2–5.5V) | Not suitable for 6V systems or ultra-low-power standby; better for high-frequency test fixtures | Choose where timing margin is critical and 6V operation is not needed |
Compared with SN74HC109PWR and 74AHC109PW,118, the M74HC109RM13TR offers optimal balance of 6V tolerance, 2µA standby current, and MSL1 packaging - making it preferred for long-life industrial controllers requiring wide supply flexibility and zero-power retention.
Availability
M74HC109RM13TR is available at Aetrix Electronics and suitable for industrial PLC sequencers, automotive body control modules, digital power supply controllers, and test equipment pattern generators requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for M74HC109RM13TR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing analog, digital, and mixed-signal ICs for industrial, automotive, and consumer markets.
The M74HC109 belongs to ST's high-speed CMOS logic family, engineered for pin- and function-compatibility with legacy 74-series devices while delivering superior power efficiency, noise immunity, and extended temperature operation.
FAQ
What is the maximum clock frequency supported by M74HC109RM13TR?
The M74HC109RM13TR achieves a typical maximum clock frequency of 67MHz at VCC = 6V and TA = 25°C, with guaranteed minimum of 30MHz across the full –55°C to +125°C operating range per AC electrical characteristics table. This value assumes CL = 50pF load and input rise/fall times ≤400ns at 6V.
Does M74HC109RM13TR support asynchronous preset and clear functions?
Yes - pins 1/15 (1CLR/2CLR) and 5/11 (1PR/2PR) provide active-low asynchronous control, allowing immediate state override independent of clock activity. Both preset and clear dominate over J/K inputs and clock edges, with minimum pulse width requirements of 6ns at VCC = 6V as specified in the AC characteristics table.
What package type is used for M74HC109RM13TR?
M74HC109RM13TR uses a 16-pin TSSOP (Thin Shrink Small Outline Package) with 4.9mm × 6.4mm body dimensions, 0.65mm lead pitch, and MSL1 moisture sensitivity rating. Mechanical data confirms compliance with JEDEC MO-153, enabling compatibility with standard SMT assembly lines and reflow profiles.
How does M74HC109RM13TR handle noise on its control inputs?
The device guarantees high noise immunity with VNIH and VNIL specified at 28% of VCC (minimum) across the full operating voltage range, meaning input thresholds remain tightly bounded relative to supply rail. This design prevents false triggering from EMI or crosstalk in noisy industrial environments without requiring external RC filtering.
M74HC109RM13TR Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- 74HC
- Package/Case:
- 16-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Function:
- Set(Preset) and Reset
- Type:
- JK Type
- Output Type:
- Complementary
- Number of Elements:
- 2
- Number of Bits per Element:
- 1
- Clock Frequency:
- 67 MHz
- Max Propagation Delay @ V, Max CL:
- 26ns @ 6V, 50pF
- Trigger Type:
- Positive Edge
- Current - Output High, Low:
- 5.2mA, 5.2mA
- Voltage - Supply:
- 2V ~ 6V
- Current - Quiescent (Iq):
- 2 µA
- Input Capacitance:
- 5 pF
- Operating Temperature:
- -55°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SO
M74HC109RM13TR FAQ
1.How can I place an order for M74HC109RM13TR through Aetrix?
Please submit a Request for Quotation (RFQ) for M74HC109RM13TR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for M74HC109RM13TR reliable?
The price and inventory of M74HC109RM13TR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for M74HC109RM13TR is usually 5 days.
3.What payment methods are accepted for M74HC109RM13TR?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for M74HC109RM13TR transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for M74HC109RM13TR?
M74HC109RM13TR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your M74HC109RM13TR order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for M74HC109RM13TR?
For technical support, including M74HC109RM13TR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your M74HC109RM13TR requirements.
6.How does Aetrix verify that M74HC109RM13TR is sourced from the original manufacturer or authorized distributors?
All M74HC109RM13TR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that M74HC109RM13TR meets industry standards.
7.What is the process for return or replacement of M74HC109RM13TR?
All M74HC109RM13TR units undergo pre-shipment inspection (PSI). If there is an issue with M74HC109RM13TR, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The M74HC109RM13TR part is unused and in its original packaging.
Return procedure for M74HC109RM13TR:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
M74HC109RM13TR Tags
-
SN74HC74DR
Texas Instruments
-
SN74HC74PWR
Texas Instruments
-
74LVC1G74GT,115
Nexperia USA Inc.
-
SN74LVC2G74DCUR
Texas Instruments
-
CD4013BM96
Texas Instruments
-
SN74HCT273PWR
Texas Instruments
-
SN74LVC1G74DCUR
Texas Instruments
-
SN74HC574DWR
Texas Instruments
-
74LVC1G74DC,125
Nexperia USA Inc.
-
SN74HC273DWR
Texas Instruments
-
SN74HCT574DWR
Texas Instruments
-
SN74LVC1G74DCTR
Texas Instruments
Tech Hub
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
