My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX312EUE+T
- Part No.:
- MAX312EUE+T
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-TSSOP (0.173", 4.40mm Width)
- Datasheet:
-
MAX312EUE+T.pdf
- Description:
- IC SW SPST-NCX4 10OHM 16TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:4,825
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX312EUE+T from Maxim Integrated is a quad, single-pole/single-throw (SPST), normally closed (NC) CMOS analog switch optimized for precision signal routing in bipolar and single-supply systems. It delivers 6.5Ω typical on-resistance, 1.5Ω max on-resistance matching between channels, and rail-to-rail signal handling from ±4.5V to ±20V dual supplies or +4.5V to +30V single supply-enabling low-distortion audio routing and high-fidelity data acquisition.
For engineers reviewing the MAX312EUE+T datasheet, MAX312EUE+T pinout, MAX312EUE+T application, or MAX312EUE+T equivalent, key selection criteria include guaranteed RON flatness (≤2Ω), <2.5nA off-leakage at +85°C, >96dB crosstalk at 20kHz, ESD tolerance >2000V per Method 3015.7, and TSSOP-16 packaging for space-constrained PCB layouts.
Technical Context
The MAX312EUE+T implements a fully complementary CMOS switch architecture with matched P- and N-channel devices per channel, enabling symmetrical conduction and minimal charge injection (±30pC). Its logic interface accepts TTL/CMOS-compatible inputs referenced to VL (2.4V high, 0.8V low) independent of analog supply rails.
Designed for operation across -40°C to +85°C, it maintains ≤10Ω max on-resistance and ≤1.5Ω channel-to-channel RON match over full temperature and signal range (±10V), with guaranteed break-before-make timing only in the MAX314 variant-not applicable to MAX312EUE+T.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-Resistance (RON) | 6.5Ω typical, ≤10Ω max - ensures minimal signal attenuation and voltage drop in precision analog paths |
| RON Match Between Channels | ≤1.5Ω max - critical for matched gain/phase in differential or multi-channel signal routing |
| Analog Signal Range | ±10V (dual supply), 0V to V+ (single supply) - supports rail-to-rail input/output without clipping |
| Off-Leakage Current | ±2.5nA at +85°C - preserves accuracy in high-impedance sample-and-hold or sensor front-ends |
| Crosstalk | >96dB at 20kHz - prevents audible interference in multi-channel audio switching applications |
| ESD Protection | >2000V per Method 3015.7 - enhances robustness during board handling and system integration |
| Supply Range | +4.5V to +30V (single), ±4.5V to ±20V (dual) - enables flexible power architecture in test and avionics systems |
Pinout & Package
MAX312EUE+T is housed in a 16-pin TSSOP package (4.4mm × 5.0mm, 0.65mm pitch) with exposed pad for thermal enhancement. Pin numbering follows standard JEDEC TSSOP outline MS012.
| Pin | Circuit Role | Design Meaning |
|---|---|---|
| 1, 8, 9, 16 | IN1–IN4 | Logic control inputs; active-high enables NC path (logic '0' = ON for MAX312) |
| 2, 7, 10, 15 | COM1–COM4 | Analog common terminals - bidirectional signal path connection points |
| 3, 6, 11, 14 | NC1–NC4 | Normally closed analog terminals - conduct to COM when IN = 0V |
| 4 | V+ | Positive analog supply - sets upper rail for analog signal range |
| 5 | GND | Logic ground reference - separate from analog return in mixed-signal designs |
| 12 | V- | Negative analog supply - required for bipolar operation; tie to GND for single supply |
| 13 | VL | Logic supply voltage - decouples logic threshold from analog rails (typically 5V) |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-Rail® Signal Handling | Supports analog signals spanning full V+ to V− range without distortion or clipping |
| Guaranteed RON Flatness | ≤2Ω variation over ±10V signal range - preserves linearity in audio and instrumentation |
| Low Charge Injection | ±30pC max - minimizes voltage glitch in sample-and-hold and multiplexed ADC front-ends |
| Pin Compatibility | Direct replacement for DG411 - simplifies legacy design upgrades without layout change |
| High Off Isolation | ≥65dB at 1MHz - suppresses signal coupling between inactive channels in dense routing |
Applications
| Audio Signal Routing | Test Equipment Multiplexing |
|---|---|
|
Use Scenario: Switching line-level stereo signals between multiple sources and outputs in professional audio mixers. IC Role / Device Role / Timing Role: Quad SPST NC switch providing silent, pop-free channel selection with matched RON. Use Value: 6.5Ω RON and >96dB crosstalk prevent level mismatch and inter-channel bleed at 20kHz. |
Use Scenario: Routing DUT signals to multiple measurement instruments (DMM, scope, spectrum analyzer) in automated test systems. IC Role / Device Role / Timing Role: Precision analog path selector with low leakage and stable RON across temperature. Use Value: ±2.5nA off-leakage at +85°C ensures measurement integrity in high-impedance probe circuits. |
| Data Acquisition Front-End | Avionics Signal Conditioning |
|
Use Scenario: Multiplexing sensor outputs (thermocouple, RTD, strain gauge) into a shared ADC channel. IC Role / Device Role / Timing Role: Low-charge-injection, NC-configured switch minimizing hold-step error in S/H circuits. Use Value: ±30pC charge injection and ≤1.5Ω RON match reduce differential nonlinearity in 16-bit+ systems. |
Use Scenario: Selecting between redundant flight control sensors (e.g., air data modules) in DO-254-compliant systems. IC Role / Device Role / Timing Role: Robust analog switch operating from -40°C to +85°C with ESD-hardened I/O. Use Value: >2000V ESD rating and guaranteed parametric performance over extended temperature ensure field reliability. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX313EUE+T | Normally open (NO) configuration vs. MAX312EUE+T's NC; identical RON, leakage, and package | Required where default-open safety state is mandated (e.g., fail-safe power gating) | Select MAX313EUE+T when circuit requires de-energized default path; otherwise MAX312EUE+T preferred for default-closed signal continuity |
| ADG411BRUZ | Higher RON (35Ω typ), wider temp range (−40°C to +125°C), same TSSOP-16 footprint | Better suited for high-temp industrial environments but sacrifices signal fidelity in audio/data acquisition | Choose ADG411BRUZ only if extended temperature compliance outweighs need for low RON and low distortion |
Compared with MAX313EUE+T (NO variant) and ADG411BRUZ (higher RON, wider temp range), MAX312EUE+T uniquely balances ultra-low on-resistance, tight channel matching, and audio-grade crosstalk-making it optimal for precision signal routing where default-closed behavior and signal integrity are primary requirements.
Availability
MAX312EUE+T is available at Aetrix Electronics and suitable for audio signal routing, test equipment multiplexing, and data acquisition systems requiring stable component supply, long-term lifecycle support, and consistent parametric performance across production batches.
Supply support for MAX312EUE+T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) is a fabless semiconductor company specializing in high-performance analog, mixed-signal, and power management ICs for industrial, communications, and consumer applications.
The MAX312/MAX313/MAX314 family was designed specifically for low-distortion, low-leakage analog signal switching in test, measurement, and avionics systems-emphasizing RON matching, rail-to-rail operation, and robust ESD tolerance.
FAQ
What is the maximum analog signal voltage range supported by MAX312EUE+T?
MAX312EUE+T supports an analog signal range of ±10V when operated from dual supplies (±4.5V to ±20V), or 0V to V+ when used with a single supply (+4.5V to +30V). This rail-to-rail capability allows full utilization of the supply rails without signal clipping, making it suitable for high-dynamic-range applications such as audio routing and precision instrumentation.
Is MAX312EUE+T pin-compatible with industry-standard analog switches?
Yes, MAX312EUE+T is pin-compatible with the DG411 analog switch. This compatibility enables drop-in replacement in existing designs without PCB layout changes, preserving signal integrity while upgrading to lower on-resistance (6.5Ω vs. DG411's ~35Ω) and improved temperature stability.
How does the normally closed (NC) configuration of MAX312EUE+T affect system behavior during power loss?
The NC configuration of MAX312EUE+T ensures that analog paths remain conductive when logic inputs are unpowered or at logic low (0V). This provides fail-safe continuity in critical signal chains-such as sensor monitoring or emergency audio bypass-without requiring external pull-up circuitry or auxiliary power.
What is the guaranteed on-resistance matching between channels for MAX312EUE+T?
MAX312EUE+T guarantees ≤1.5Ω maximum on-resistance (RON) matching between any two channels across the full operating temperature range (−40°C to +85°C) and signal range (±10V). This tight matching is essential for maintaining amplitude and phase coherence in differential or multi-path analog systems.
Does MAX312EUE+T require a separate logic supply voltage (VL)?
Yes, MAX312EUE+T requires a dedicated logic supply (VL) pin, typically tied to +5V. VL establishes the logic threshold independently of analog supplies (V+, V−), allowing reliable switching control even when analog rails operate at extreme voltages-critical for mixed-voltage system interoperability.
MAX312EUE+T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Circuit:
- SPST - NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 10Ohm
- Channel-to-Channel Matching (ΔRon):
- 300mOhm
- Voltage - Supply, Single (V+):
- 4.5V ~ 30V
- Voltage - Supply, Dual (V±):
- ±4.5V ~ 20V
- Switch Time (Ton, Toff) (Max):
- 225ns, 185ns
- -3db Bandwidth:
- -
- Charge Injection:
- 20pC
- Channel Capacitance (CS(off), CD(off)):
- 15pF, 15pF
- Current - Leakage (IS(off)) (Max):
- 500pA
- Crosstalk:
- -85dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-TSSOP
MAX312EUE+T FAQ
1.How can I place an order for MAX312EUE+T through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX312EUE+T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX312EUE+T reliable?
The price and inventory of MAX312EUE+T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX312EUE+T is usually 5 days.
3.What payment methods are accepted for MAX312EUE+T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX312EUE+T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX312EUE+T?
MAX312EUE+T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX312EUE+T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX312EUE+T?
For technical support, including MAX312EUE+T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX312EUE+T requirements.
6.How does Aetrix verify that MAX312EUE+T is sourced from the original manufacturer or authorized distributors?
All MAX312EUE+T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX312EUE+T meets industry standards.
7.What is the process for return or replacement of MAX312EUE+T?
All MAX312EUE+T units undergo pre-shipment inspection (PSI). If there is an issue with MAX312EUE+T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX312EUE+T part is unused and in its original packaging.
Return procedure for MAX312EUE+T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX312EUE+T Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
