My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX313EPE+
- Part No.:
- MAX313EPE+
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-DIP (0.300", 7.62mm)
- Datasheet:
-
MAX313EPE+.pdf
- Description:
- IC SWITCH SPST-NOX4 10OHM 16DIP
- Quantity:
- Payment:
- Shipping:
Inventory:2,012
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX313EPE+ from Maxim Integrated is a quad, single-pole/single-throw (SPST), normally open (NO) CMOS analog switch optimized for precision signal routing in bipolar and single-supply systems. It delivers 6.5Ω typical on-resistance, 1.5Ω max on-resistance matching between channels, and rail-to-rail analog signal handling from ±4.5V to ±20V dual supplies or +4.5V to +30V single supply - enabling low-distortion audio routing and high-fidelity data acquisition.
For engineers reviewing the MAX313EPE+ datasheet, MAX313EPE+ pinout, MAX313EPE+ application, or MAX313EPE+ equivalent, key selection criteria include guaranteed RON flatness (≤2Ω over ±10V), <2.5nA off-leakage at +85°C, >96dB crosstalk at 20kHz, ESD tolerance >2000V per Method 3015.7, and compatibility with DG411/DG412/DG413 footprints.
Technical Context
The MAX313EPE+ implements a fully complementary CMOS transmission-gate architecture with matched P- and N-channel devices per channel, ensuring symmetrical conduction and minimal charge injection (±30pC). Its logic interface accepts TTL/CMOS-compatible inputs referenced to VL (2.4V high, 0.8V low) independent of analog supply rails.
It supports true rail-to-rail analog signal switching across the full specified supply range, with on-resistance flatness maintained ≤2Ω over VCOM = ±10V and temperature (–40°C to +85°C). Break-before-make timing is not applicable - all four switches operate independently as SPST NO devices.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-Resistance (RON) | 6.5Ω typical, ≤10Ω max - ensures minimal signal attenuation and voltage drop in precision analog paths. |
| RON Matching | ≤1.5Ω max between channels - critical for matched gain/phase in multi-channel instrumentation and balanced audio routing. |
| Analog Signal Range | ±10V with ±15V supplies; 0V to V+ with single supply - supports rail-to-rail signal handling without clipping. |
| Off-Leakage Current | ±2.5nA max at +85°C - preserves accuracy in high-impedance sample-and-hold and sensor front-ends. |
| Crosstalk | >96dB at 20kHz - prevents audible interference in stereo/multi-channel audio signal switching. |
| ESD Protection | >2000V per Method 3015.7 - enables robust handling in manufacturing and field-deployed test equipment. |
| Turn-On / Turn-Off Time | 65ns / 235ns typical (dual supply, VCOM = ±10V) - suitable for multiplexing up to ~1MHz sampling rates. |
Pinout & Package
MAX313EPE+ is housed in a 16-pin plastic DIP package (0.300" wide), RoHS-compliant and lead-free. Pin spacing conforms to standard 0.1" grid; body dimensions: 0.344" × 0.197" × 0.175".
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 8, 9, 16 | IN1, IN2, IN3, IN4 | Logic control inputs; active-high, TTL/CMOS compatible; drive internal gate drivers for respective switches. |
| 2, 7, 10, 15 | COM1, COM2, COM3, COM4 | Analog common terminals - bidirectional signal path connection points for each SPST switch. |
| 3, 6, 11, 14 | NO1, NO2, NO3, NO4 | Normally open analog outputs - connect to COM only when corresponding IN = logic high. |
| 4 | V+ | Positive analog supply input - supports +4.5V to +30V (single) or ±4.5V to ±20V (dual) operation. |
| 5 | GND | Logic ground reference - tied to system digital ground; separates logic domain from analog supplies. |
| 12 | VL | Logic supply voltage - powers input buffers; typically +5V, independent of V+/V− rails. |
| 13 | V− | Negative analog supply input - required for dual-supply operation; connect to GND for single-supply use. |
Key Features
| Feature | Design Value |
|---|---|
| Pin-compatible replacement | Direct footprint match with DG411/DG412/DG413 - enables drop-in upgrade without PCB redesign. |
| RON flatness | ≤2Ω max over ±10V signal range - maintains consistent gain and THD across full analog swing. |
| Rail-to-rail signal handling | Supports VCOM from V− to V+ - eliminates level-shifting circuitry in mixed-signal interfaces. |
| Low charge injection | ±30pC max - minimizes voltage glitch in sample-and-hold and switched-capacitor circuits. |
| High off-isolation | –65dB at 1MHz - suppresses crosstalk between inactive channels in dense multiplexer layouts. |
Applications
| Audio Signal Routing | Test Equipment Multiplexing |
|---|---|
|
Use Scenario: Switching line-level stereo signals between multiple sources (DACs, microphones, codecs) in professional audio mixers. IC Role / Device Role: Quad SPST NO analog switch providing isolated, low-distortion signal paths with matched channel characteristics. Use Value: 6.5Ω RON and >96dB crosstalk preserve stereo imaging and dynamic range without external buffering. |
Use Scenario: Routing calibrated reference voltages and DUT signals in automated test equipment (ATE) and bench multimeters. IC Role / Device Role: Precision analog multiplexer enabling sequential measurement of up to four sensors or channels. Use Value: ≤2.5nA off-leakage at +85°C and ≤2Ω RON flatness ensure measurement accuracy across temperature and signal range. |
| Data Acquisition Systems | Avionics Signal Conditioning |
|
Use Scenario: Channel selection in 12-bit+ SAR ADC front-ends where low on-resistance and leakage are critical for settling time and offset stability. IC Role / Device Role: Low-RON, matched analog switch interfacing transducer outputs to programmable gain amplifiers and ADC inputs. Use Value: 1.5Ω RON matching minimizes channel-to-channel gain error; rail-to-rail support accommodates ±10V industrial sensor ranges. |
Use Scenario: Selecting between redundant flight control signals (e.g., airspeed, attitude) in certified avionics subsystems operating from –40°C to +85°C. IC Role / Device Role: High-reliability analog switch meeting DO-160 environmental stress requirements via extended temperature grade and ESD hardening. Use Value: –40°C to +85°C operating range (E-grade), >2000V ESD rating, and 100% hot-temp leakage testing ensure functional integrity under vibration and thermal cycling. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX313CPE+ | 0°C to +70°C temperature range; identical electrical specs and pinout. | Suitable for commercial-grade instrumentation, non-temperature-critical audio gear. | Select MAX313CPE+ for cost-sensitive, ambient-temperature applications where industrial temp range is unnecessary. |
| ADG413BRZ | 44V max supply; 35Ω typical RON; 16-pin SOIC package; no VL pin (logic tied to V+). | Better suited for high-voltage industrial I/O; higher RON limits use in low-distortion audio. | Choose ADG413BRZ when operating above +30V or requiring SOIC packaging; avoid for audio or low-leakage DAQ. |
Compared with MAX313CPE+, the MAX313EPE+ extends operational reliability to –40°C to +85°C while retaining identical RON, leakage, and pinout; versus ADG413BRZ, it offers lower distortion and tighter matching but narrower supply range and DIP-only packaging.
Availability
MAX313EPE+ is available at Aetrix Electronics and suitable for test equipment, avionics signal conditioning, and data acquisition systems requiring stable component supply across extended temperature environments.
Supply support for MAX313EPE+ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs precision analog, mixed-signal, and power-management ICs for demanding industrial, communications, and computing applications.
The MAX312/MAX313/MAX314 family was engineered specifically for high-fidelity analog signal routing in test, measurement, and audio systems where low on-resistance, tight matching, and rail-to-rail performance are essential.
FAQ
What is the maximum supply voltage rating for MAX313EPE+?
The MAX313EPE+ supports absolute maximum analog supply ratings of V+ = –0.3V to +44V and V− = +0.3V to –44V. For reliable operation, use within the recommended dual-supply range of ±4.5V to ±20V or single-supply range of +4.5V to +30V. Exceeding these ranges risks permanent damage, even if within absolute maximums.
Does MAX313EPE+ require a separate logic supply voltage?
Yes, MAX313EPE+ requires VL (pin 12) to be supplied - typically +5V - to power its logic input buffers. VL operates independently of V+ and V−, allowing TTL/CMOS-compatible control even when analog supplies are asymmetric or floating. Leaving VL unconnected disables logic functionality.
Can MAX313EPE+ be used in single-supply configurations?
Yes, MAX313EPE+ supports single-supply operation: tie V− (pin 13) to GND (pin 5), apply V+ (pin 4) from +4.5V to +30V, and set VL (pin 12) to +5V. The analog signal range then spans 0V to V+, maintaining rail-to-rail capability and preserving RON specs down to +4.5V.
What is the typical charge injection value for MAX313EPE+?
The MAX313EPE+ exhibits ±30pC maximum charge injection (VCTE) under standard test conditions (V+ = ±15V, V− = ∓15V, VCOM = ±10V). This low value minimizes voltage glitches in sample-and-hold circuits and ensures fast settling in precision data acquisition paths using the MAX313EPE+.
Is MAX313EPE+ pin-compatible with industry-standard analog switches?
Yes, MAX313EPE+ is explicitly designed as a pin-compatible upgrade for DG411, DG412, and DG413 analog switches in 16-pin DIP packages. All signal, supply, and logic pins align directly - enabling drop-in replacement without layout changes or firmware updates when migrating to lower RON and improved leakage performance.
MAX313EPE+ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Active
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 10Ohm
- Channel-to-Channel Matching (ΔRon):
- 300mOhm
- Voltage - Supply, Single (V+):
- 4.5V ~ 30V
- Voltage - Supply, Dual (V±):
- ±4.5V ~ 20V
- Switch Time (Ton, Toff) (Max):
- 225ns, 185ns
- -3db Bandwidth:
- -
- Charge Injection:
- 20pC
- Channel Capacitance (CS(off), CD(off)):
- 15pF, 15pF
- Current - Leakage (IS(off)) (Max):
- 500pA
- Crosstalk:
- -85dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- 16-PDIP
MAX313EPE+ FAQ
1.How can I place an order for MAX313EPE+ through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX313EPE+ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX313EPE+ reliable?
The price and inventory of MAX313EPE+ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX313EPE+ is usually 5 days.
3.What payment methods are accepted for MAX313EPE+?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX313EPE+ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX313EPE+?
MAX313EPE+ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX313EPE+ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX313EPE+?
For technical support, including MAX313EPE+ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX313EPE+ requirements.
6.How does Aetrix verify that MAX313EPE+ is sourced from the original manufacturer or authorized distributors?
All MAX313EPE+ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX313EPE+ meets industry standards.
7.What is the process for return or replacement of MAX313EPE+?
All MAX313EPE+ units undergo pre-shipment inspection (PSI). If there is an issue with MAX313EPE+, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX313EPE+ part is unused and in its original packaging.
Return procedure for MAX313EPE+:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX313EPE+ Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
