My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX313ESE+
- Part No.:
- MAX313ESE+
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
MAX313ESE+.pdf
- Description:
- IC SWITCH SPST-NOX4 10OHM 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:815
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX313ESE+ from Maxim Integrated is a quad, single-pole/single-throw (SPST), normally open (NO) CMOS analog switch optimized for precision signal routing in bipolar and single-supply systems. It delivers 6.5Ω typical on-resistance, 1.5Ω max on-resistance matching between channels, and rail-to-rail signal handling across ±4.5V to ±20V dual supplies or +4.5V to +30V single supply-enabling low-distortion audio routing and high-fidelity data acquisition.
For engineers reviewing the MAX313ESE+ datasheet, MAX313ESE+ pinout, MAX313ESE+ application, or MAX313ESE+ equivalent, key selection criteria include guaranteed RON flatness (≤2Ω), <2.5nA off-leakage at +85°C, >96dB crosstalk at 20kHz, ESD tolerance >2000V per Method 3015.7, and compatibility with DG411/DG412/DG413 footprints.
Technical Context
The MAX313ESE+ implements a fully complementary CMOS transmission-gate architecture with matched P- and N-channel devices per switch, enabling symmetrical conduction and minimal charge injection (±30pC). Its logic interface accepts TTL/CMOS-compatible inputs referenced to VL (2.4V high, 0.8V low) independent of analog supply rails.
It supports true rail-to-rail analog signal switching from V− to V+, with guaranteed performance over −40°C to +85°C. The device exhibits <2Ω RON flatness over ±10V signal range and maintains ≤10Ω max on-resistance across full temperature and supply ranges-critical for precision instrumentation and sample-and-hold circuits.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-Resistance (RON) | 6.5Ω typical; ensures minimal signal attenuation and voltage drop in low-level analog paths. |
| RON Matching | ≤1.5Ω max between channels; enables precise gain/phase matching in multi-channel signal conditioning. |
| RON Flatness | ≤2Ω max over ±10V signal range; preserves linearity and THD in audio and sensor interfaces. |
| Off-Leakage Current | ±2.5nA at +85°C; prevents DC error accumulation in high-impedance sample-and-hold or integrator circuits. |
| Crosstalk | >96dB at 20kHz; isolates adjacent signal paths in dense multiplexed systems like PBX and test equipment. |
| ESD Protection | >2000V per Method 3015.7; withstands handling and board-level transients without latch-up or parametric shift. |
| Supply Range | +4.5V to +30V (single) or ±4.5V to ±20V (dual); supports industrial, avionics, and legacy telecom power architectures. |
Pinout & Package
MAX313ESE+ is housed in a 16-pin narrow SO (SOIC-N) package, 3.9mm wide, with standard 1.27mm pitch and JEDEC MS-012 outline. Pin 1 is marked by a beveled corner or dot; the package is RoHS-compliant and lead-free.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 8, 9, 16 | IN1–IN4 | Logic control inputs; active-high, TTL/CMOS compatible, referenced to VL. |
| 2, 7, 10, 15 | COM1–COM4 | Analog common terminals; bidirectional signal path connection points. |
| 3, 6, 11, 14 | NO1–NO4 | Normally open analog outputs; connect to COM only when corresponding IN = logic high. |
| 4 | V+ | Positive analog supply input; supports up to +30V or +20V in dual-supply mode. |
| 5 | GND | Logic ground reference; separate from analog return but tied internally to substrate. |
| 12 | VL | Logic supply input; sets logic threshold (2.4V/0.8V) independently of analog rails. |
| 13 | V− | Negative analog supply input; connects to GND for single-supply operation. |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-Rail® Signal Handling | Switches signals from V− to V+ without clipping-enables full dynamic range utilization in ±15V op-amp systems. |
| Guaranteed RON Match | ≤1.5Ω max channel-to-channel variation-ensures amplitude consistency in multi-path filtering or calibration circuits. |
| Low Charge Injection | ±30pC maximum-minimizes voltage glitch on high-Z hold capacitors in precision ADC front-ends. |
| Pin Compatibility | Direct replacement for DG411/DG412/DG413-allows drop-in upgrade to lower RON, better matching, and higher ESD rating. |
| Break-Before-Make Timing | 70ns typical (MAX314 only); not applicable to MAX313ESE+ as it is SPST NO-ensures no signal shorting during state transitions in mixed-signal systems. |
Applications
| Audio Signal Routing | Test Equipment Multiplexing |
|---|---|
|
Use Scenario: Switching line-level stereo signals between multiple sources and outputs in professional audio mixers. IC Role / Device Role / Timing Role: Quad SPST NO analog switch controlling signal path continuity with zero-crossing–insensitive timing. Use Value: 6.5Ω RON and <2Ω flatness preserve frequency response and THD below −100dB up to 20kHz. |
Use Scenario: Routing DUT signals to multiple measurement instruments (oscilloscope, spectrum analyzer, DMM) in automated test systems. IC Role / Device Role / Timing Role: Precision analog multiplexer enabling sequential channel access without loading or offset errors. Use Value: ±2.5nA leakage at +85°C prevents drift in µV-level measurements; >96dB crosstalk avoids inter-channel interference. |
| PBX/PABX Line Interface | Data Acquisition Channel Selection |
|
Use Scenario: Connecting subscriber lines to codec or hybrid circuits in digital telephone switches. IC Role / Device Role / Timing Role: High-voltage-tolerant analog switch managing tip/ring signaling and voice path isolation. Use Value: ±20V dual-supply support handles ringing voltages; >2000V ESD protection survives field surges on exposed line cards. |
Use Scenario: Selecting among 4 sensor inputs (thermocouple, RTD, strain gauge) feeding a shared precision ADC. IC Role / Device Role / Timing Role: Low-leakage, low-RON channel selector minimizing gain/offset errors in ratiometric measurements. Use Value: ≤1.5Ω RON match ensures consistent channel gain; rail-to-rail operation accommodates ±10V sensor outputs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX313CSE | Same electrical specs, but rated for 0°C to +70°C industrial temperature range. | Not suitable for extended-temperature environments such as automotive under-hood or avionics. | Select MAX313CSE only for cost-sensitive commercial-grade designs where ambient temperature stays within 0°C–70°C. |
| ADG413BRZ | Quad SPST NO, 35Ω typical RON, ±15V supply, no VL pin-logic tied to V+. | Higher on-resistance increases insertion loss; lacks independent logic supply for mixed-voltage systems. | Choose ADG413BRZ only if board already uses ADI's footprint and system tolerates higher RON and reduced matching. |
Compared with MAX313CSE, MAX313ESE+ extends operational reliability to −40°C to +85°C while retaining identical pinout and performance; versus ADG413BRZ, it delivers 5.4× lower RON, independent logic supply, and tighter channel matching-making it superior for precision, wide-temperature, or mixed-rail designs.
Availability
MAX313ESE+ is available at Aetrix Electronics and suitable for audio signal routing, test equipment multiplexing, and PBX line interface applications requiring stable component supply, long-term lifecycle assurance, and traceable sourcing.
Supply support for MAX313ESE+ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) is a U.S.-based semiconductor company specializing in high-performance analog, mixed-signal, and power-management ICs for industrial, communications, and computing markets.
The MAX312/MAX313/MAX314 family was designed specifically for low-distortion, high-precision analog signal routing in test, telecom, and instrumentation systems-emphasizing RON accuracy, leakage control, and robust ESD immunity.
FAQ
What is the operating temperature range of the MAX313ESE+?
The MAX313ESE+ is specified for operation from −40°C to +85°C. This extended industrial temperature range ensures reliable performance in demanding environments such as factory automation controllers, outdoor telecom equipment, and avionics subsystems-unlike the commercial-grade MAX313CSE which is limited to 0°C to +70°C.
Does the MAX313ESE+ support single-supply operation?
Yes, the MAX313ESE+ supports single-supply operation from +4.5V to +30V. In this configuration, V− is connected to GND, and analog signals swing from 0V to V+. The device maintains rail-to-rail signal handling and all key specifications-including 6.5Ω typical RON and ≤2.5nA leakage at +85°C-under single-supply conditions.
Is the MAX313ESE+ pin-compatible with the DG411?
Yes, the MAX313ESE+ is pin-compatible with the DG411, DG412, and DG413. It shares identical pin assignments, SOIC-16 footprint, and logic polarity-allowing direct replacement without PCB modification. However, MAX313ESE+ improves on RON (6.5Ω vs. 35Ω), matching (1.5Ω vs. 5Ω), and ESD rating (>2000V vs. ~200V).
What is the role of the VL pin on the MAX313ESE+?
The VL pin on the MAX313ESE+ sets the logic threshold independently of the analog supply rails. It accepts 2.4V (min) high and 0.8V (max) low inputs, enabling clean interfacing with 3.3V or 5V microcontrollers-even when V+ is ±15V or +24V. This decoupling prevents logic misstates due to analog rail noise or sequencing delays.
Can the MAX313ESE+ be used in high-frequency signal paths above 1MHz?
The MAX313ESE+ provides usable on-response up to ~100MHz (−2dB loss), but off-isolation degrades rapidly above 5MHz due to channel capacitance. For RF or high-speed digital switching above 5MHz, layout becomes critical-and for frequencies beyond 30MHz, dedicated RF switches like the MAX440 series are recommended. At audio and baseband frequencies (<1MHz), its performance remains optimal.
MAX313ESE+ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Active
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 10Ohm
- Channel-to-Channel Matching (ΔRon):
- 300mOhm
- Voltage - Supply, Single (V+):
- 4.5V ~ 30V
- Voltage - Supply, Dual (V±):
- ±4.5V ~ 20V
- Switch Time (Ton, Toff) (Max):
- 225ns, 185ns
- -3db Bandwidth:
- -
- Charge Injection:
- 20pC
- Channel Capacitance (CS(off), CD(off)):
- 15pF, 15pF
- Current - Leakage (IS(off)) (Max):
- 500pA
- Crosstalk:
- -85dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
MAX313ESE+ FAQ
1.How can I place an order for MAX313ESE+ through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX313ESE+ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX313ESE+ reliable?
The price and inventory of MAX313ESE+ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX313ESE+ is usually 5 days.
3.What payment methods are accepted for MAX313ESE+?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX313ESE+ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX313ESE+?
MAX313ESE+ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX313ESE+ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX313ESE+?
For technical support, including MAX313ESE+ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX313ESE+ requirements.
6.How does Aetrix verify that MAX313ESE+ is sourced from the original manufacturer or authorized distributors?
All MAX313ESE+ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX313ESE+ meets industry standards.
7.What is the process for return or replacement of MAX313ESE+?
All MAX313ESE+ units undergo pre-shipment inspection (PSI). If there is an issue with MAX313ESE+, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX313ESE+ part is unused and in its original packaging.
Return procedure for MAX313ESE+:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX313ESE+ Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
