My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX352ESE+
- Part No.:
- MAX352ESE+
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
MAX352ESE+.pdf
- Description:
- IC SWITCH SPST-NOX4 35OHM 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:506
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX352ESE+ from Maxim Integrated is a precision quad single-pole single-throw (SPST) analog switch with four normally open (NO) channels, fabricated using a 44V silicon-gate process. It delivers low on-resistance (≤35Ω), guaranteed channel-to-channel match (<2Ω), flat on-resistance over signal range (∆3Ω max), <6nA off-leakage at +85°C, and sub-175ns turn-on time. It supports rail-to-rail analog signal handling in military radios and guidance systems.
For engineers reviewing the MAX352ESE+ datasheet, MAX352ESE+ pinout, MAX352ESE+ application, or MAX352ESE+ equivalent, key selection criteria include guaranteed on-resistance matching across temperature, charge injection (<10pC), ESD robustness (>2000V), dual-supply operation (±4.5V to ±20V), and TTL/CMOS logic compatibility without external level-shifting.
Technical Context
The MAX352ESE+ implements monolithic CMOS SPST switches with substrate tied to V+, enabling full rail-to-rail analog signal swing from V− to V+. Its architecture guarantees matched on-resistance between all four channels and maintains flatness across the entire analog input range - critical for precision sample-and-hold and multiplexed instrumentation.
It operates from single supplies (+10V to +30V) or split supplies (±4.5V to ±20V), with VL pin configurable for TTL (5V) or CMOS (V+) logic thresholds. Input leakage remains below 6nA at +85°C, and charge injection is tightly controlled at ≤10pC - essential for low-distortion switching in high-accuracy data acquisition.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On Resistance | ≤35Ω max - ensures minimal signal attenuation and gain error in precision analog paths |
| On Resistance Match | <2Ω between channels - enables accurate channel-to-channel signal routing without calibration |
| On Resistance Flatness | ∆3Ω max over signal range - preserves linearity in variable-amplitude applications like audio or sensor interfaces |
| Charge Injection | ≤10pC - limits voltage glitch on sampled nodes, critical for high-resolution ADC front-ends |
| Off-Leakage Current | <6nA at +85°C - maintains signal integrity in battery-operated or high-impedance circuits |
| ESD Rating | >2000V per Method 3015.7 - provides robust handling during board assembly and field service |
| Supply Range | ±4.5V to ±20V or +10V to +30V - supports industrial, military, and test equipment power architectures |
Pinout & Package
MAX352ESE+ uses a 16-pin narrow SO (Small Outline) package with 1.27mm pitch, JEDEC MS-012AC compliant, body size 10.3mm × 5.3mm × 1.75mm. Pin 1 is IN1; pin 16 is V+; substrate connected to V+.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1–IN4 (pins 15,14,7,6) | Logic Control Input | Active-high TTL/CMOS-compatible enable signals controlling NO1–NO4 state |
| COM1–COM4 (pins 16,13,5,8) | Analog Switch Common Terminal | Input/output node shared with corresponding NO terminal when switch is closed |
| NO1–NO4 (pins 1,12,9,4) | Analog Switch Normally Open Terminal | Open-circuit path to COM when IN = low; connects to COM when IN = high |
| V+ (pin 11) | Positive Supply Voltage | Bias source for analog path and substrate connection - must be ≥ VCOM, VNO |
| V− (pin 2) | Negative Supply Voltage | Reference for negative analog swing and internal biasing - required for bipolar operation |
| GND (pin 3) | Ground Reference | Logic ground return; separate from analog signal reference unless single-supply configured |
| VL (pin 10) | Logic Supply Voltage | Sets logic threshold: 5V for TTL compatibility, V+ for CMOS - defines VINH/VINL levels |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail analog signal handling | Supports VCOM, VNO signals from V− to V+ - eliminates level-shifting in ±15V systems |
| Guaranteed on-resistance matching | <2Ω channel-to-channel variation - enables precision multiplexing without per-channel correction |
| Low charge injection | ≤10pC - reduces sampling transient errors in S/H and switched-capacitor circuits |
| High ESD immunity | >2000V HBM - protects against handling damage in rugged military and test environments |
| Single- and dual-supply flexibility | +10V to +30V or ±4.5V to ±20V operation - simplifies power design across diverse platforms |
Applications
| Military Radios | Guidance and Control Systems |
|---|---|
Use Scenario: Signal routing of RF front-end LO paths and IF band selection under vibration and wide temperature extremes. IC Role / Device Role / Timing Role: Quad SPST switch isolating antenna diversity paths and filter banks with minimal insertion loss and crosstalk. Use Value: Guaranteed <2Ω on-resistance match ensures consistent path gain across channels, reducing calibration burden in field-deployed radios. | Use Scenario: Multiplexing inertial sensor outputs (gyro, accelerometer) into a central ADC with minimal offset drift. IC Role / Device Role / Timing Role: Precision analog switch enabling sequential sampling of high-Z sensor nodes without loading or charge injection artifacts. Use Value: ≤10pC charge injection and <6nA leakage at +85°C preserve DC accuracy in closed-loop stabilization algorithms. |
| Sample-and-Hold Circuits | Battery-Operated Test Equipment |
Use Scenario: Acquiring fast, high-fidelity analog waveforms in oscilloscope front-ends and digitizers. IC Role / Device Role / Timing Role: Low-glitch switch connecting hold capacitor to amplifier output during acquisition phase. Use Value: ∆3Ω max on-resistance flatness ensures linear settling and minimal harmonic distortion across full input range. | Use Scenario: Portable multimeters and handheld analyzers requiring long battery life and stable performance over temperature. IC Role / Device Role / Timing Role: Low-power analog switch routing reference voltages, calibration sources, and DUT connections. Use Value: 35µW typical power consumption and <6nA leakage at +85°C extend operational time and reduce self-heating drift. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ADG1412BRUZ | 4-channel SPST, 1.8Ω typical RON, but only rated for −40°C to +125°C and requires dual supply only | Higher precision RON match but lacks single-supply support and has lower ESD rating (1000V) | Prefer for ultra-low-RON needs where supply flexibility is not required |
| TS5A3157DCKR | Single-channel, 0.75Ω RON, 5V-only supply, smaller SC70-6 package | Not quad-channel; unsuitable for space-constrained multi-path routing | Select only when replacing one channel and minimizing board area is primary |
Compared with ADG1412BRUZ and TS5A3157DCKR, the MAX352ESE+ uniquely combines quad-channel integration, guaranteed RON matching, rail-to-rail operation across both single- and dual-supply modes, and >2000V ESD - making it optimal for ruggedized, multi-signal routing in defense and industrial systems.
Availability
MAX352ESE+ is available at Aetrix Electronics and suitable for military radios, guidance and control systems, sample-and-hold circuits, battery-operated test equipment, and heads-up displays requiring stable component supply across extended temperature ranges.
Supply support for MAX352ESE+ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs high-performance analog and mixed-signal ICs for demanding industrial, automotive, and communications applications.
The MAX352ESE+ belongs to Maxim's precision analog switch family, engineered for applications requiring guaranteed parameter matching, low charge injection, and robust operation in harsh environments including military and aerospace systems.
FAQ
What is the operating temperature range for the MAX352ESE+?
The MAX352ESE+ is specified for −40°C to +85°C operation, validated across this full industrial/military temperature range with guaranteed on-resistance matching, leakage, and switching performance. This range is confirmed in the Ordering Information table and Electrical Characteristics sections of the official datasheet, and applies specifically to the ESE package variant.
Does the MAX352ESE+ support single-supply operation?
Yes, the MAX352ESE+ supports single-supply operation from +10V to +30V. When used in single-supply mode, V− must be connected to ground, and VL should be set to 5V for TTL compatibility or to V+ for CMOS logic levels - all explicitly defined in the Applications Information section of the datasheet.
What is the maximum analog signal voltage the MAX352ESE+ can handle?
The MAX352ESE+ supports rail-to-rail analog signal handling from V− to V+, with a maximum breakdown voltage of 44V. The absolute maximum rating specifies V+ ≤ 44V referenced to V−, enabling ±20V bipolar or +30V unipolar signal swings - confirmed in Absolute Maximum Ratings and General Description.
How is logic-level compatibility achieved on the MAX352ESE+?
Logic-level compatibility on the MAX352ESE+ is achieved via the VL pin: connecting VL to 5V sets TTL-compatible thresholds (VINH = 2.4V, VINL = 0.8V), while tying VL to V+ configures CMOS thresholds (VINH ≈ 0.7×V+, VINL ≈ 0.3×V+). This dual-mode support is documented in the Electrical Characteristics and Applications Information sections.
Is the MAX352ESE+ pin-compatible with other devices in the MAX351/MAX352/MAX353 family?
Yes, the MAX352ESE+ shares identical pinout and package (16-pin narrow SO) with MAX351ESE+ and MAX353ESE+, differing only in internal switch configuration (NO vs NC vs mixed). This allows direct substitution in layouts designed for any of the three variants, provided logic polarity and channel function align with system requirements.
MAX352ESE+ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Active
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 35Ohm
- Channel-to-Channel Matching (ΔRon):
- 2Ohm (Max)
- Voltage - Supply, Single (V+):
- 10V ~ 30V
- Voltage - Supply, Dual (V±):
- ±4.5V ~ 20V
- Switch Time (Ton, Toff) (Max):
- 175ns, 145ns
- -3db Bandwidth:
- -
- Charge Injection:
- 5pC
- Channel Capacitance (CS(off), CD(off)):
- 9pF, 9pF
- Current - Leakage (IS(off)) (Max):
- 250pA
- Crosstalk:
- -85dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
MAX352ESE+ FAQ
1.How can I place an order for MAX352ESE+ through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX352ESE+ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX352ESE+ reliable?
The price and inventory of MAX352ESE+ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX352ESE+ is usually 5 days.
3.What payment methods are accepted for MAX352ESE+?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX352ESE+ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX352ESE+?
MAX352ESE+ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX352ESE+ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX352ESE+?
For technical support, including MAX352ESE+ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX352ESE+ requirements.
6.How does Aetrix verify that MAX352ESE+ is sourced from the original manufacturer or authorized distributors?
All MAX352ESE+ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX352ESE+ meets industry standards.
7.What is the process for return or replacement of MAX352ESE+?
All MAX352ESE+ units undergo pre-shipment inspection (PSI). If there is an issue with MAX352ESE+, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX352ESE+ part is unused and in its original packaging.
Return procedure for MAX352ESE+:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX352ESE+ Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
