My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX353MJE
- Part No.:
- MAX353MJE
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-CDIP (0.300", 7.62mm)
- Datasheet:
-
MAX353MJE.pdf
- Description:
- IC SW SPST-NO/NCX4 35OHM 16CDIP
- Quantity:
- Payment:
- Shipping:
Inventory:1,725
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX353MJE from Maxim Integrated is a precision quad SPST analog switch with two normally open (NO) and two normally closed (NC) channels, designed for high-reliability military and aerospace signal routing. It features 35Ω max on-resistance, <2Ω channel-to-channel match, <10pC charge injection, <6nA off-leakage at +85°C, and operates across -55°C to +125°C in 16-pin CERDIP packaging. It enables rail-to-rail analog switching in guidance systems and battery-operated test equipment.
For engineers reviewing the MAX353MJE datasheet, MAX353MJE pinout, MAX353MJE application, or MAX353MJE equivalent, this page delivers verified electrical specs, thermal operating limits, logic interface compatibility (TTL/CMOS), dual- or single-supply operation (+10V to +30V or ±4.5V to ±20V), and MIL-grade packaging details critical for ruggedized system design.
Technical Context
The MAX353MJE implements four independent SPST switches using Maxim's 44V silicon-gate process, enabling rail-to-rail analog signal handling up to ±15.5V with guaranteed flat on-resistance (∆3Ω max) over full signal range. Its CMOS/TTL-compatible control inputs drive low-power switching (35µW typical) while maintaining ESD robustness >2000V per Method 3015.7.
Unlike standard analog switches, the MAX353MJE integrates mixed NO/NC topology in one package-channels 1 & 4 are NO, channels 2 & 3 are NC-supporting break-before-make timing (25ns typ) and precise signal path selection without external logic inversion. All parameters-including leakage, charge injection, and on-resistance matching-are guaranteed over its full -55°C to +125°C operating range.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On Resistance | ≤35Ω max - ensures minimal signal attenuation and gain error in precision instrumentation paths |
| On Resistance Match | ≤2Ω between channels - enables matched gain/phase response in multi-channel data acquisition |
| Charge Injection | ≤10pC - reduces settling error and droop in sample-and-hold circuits |
| Off-Leakage Current | ≤6nA at +85°C - preserves accuracy in high-impedance sensor interfaces and long-integration-time systems |
| Supply Range | +10V to +30V single or ±4.5V to ±20V dual - supports wide-input industrial and avionics power rails |
| Operating Temperature | -55°C to +125°C - qualified for extended-range military, space, and downhole applications |
| ESD Rating | >2000V per Method 3015.7 - enhances field reliability in uncontrolled handling environments |
| Switching Speed | tON < 175ns, tOFF < 145ns - suitable for medium-speed multiplexing in real-time control loops |
Pinout & Package
MAX353MJE uses a hermetically sealed 16-pin CERDIP package (0.300" wide, JEDEC MS-001), optimized for thermal stability and moisture resistance in harsh environments. Pin 1 is IN1; pin 16 is COM1; pins 1–4 and 13–16 carry logic and analog signals; pins 4 (V−), 5 (GND), 11 (V+), and 12 (VL) provide supply connections.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1, IN2, IN3, IN4 | Logic Control Input | CMOS/TTL-compatible digital inputs controlling respective switch states; active-high logic |
| COM1–COM4 | Analog Switch Common Terminal | Signal input/output node shared between NO and NC paths per channel |
| NO1, NO4 | Analog Switch Normally Open Terminal | Connected to COMx only when corresponding INx = logic high |
| NC2, NC3 | Analog Switch Normally Closed Terminal | Connected to COMx only when corresponding INx = logic low |
| V+, V− | Positive/Negative Supply Voltage | Supports bipolar (±4.5V to ±20V) or single-supply (+10V to +30V) operation; substrate tied to V+ |
| VL | Logic Supply Voltage | Set to +5V for TTL compatibility or to V+ for CMOS-level inputs |
| GND | Ground Reference | Common return for logic and analog sections; must be low-impedance in mixed-signal layouts |
Key Features
| Feature | Design Value |
|---|---|
| Mixed NO/NC topology | Two NO (ch1, ch4) and two NC (ch2, ch3) switches enable flexible signal path configuration without external inverters |
| Rail-to-rail analog range | Supports ±15.5V signal swing with 44V breakdown voltage - eliminates level-shifting in high-voltage sensor interfaces |
| Guaranteed flat RON | ∆3Ω max variation across full analog input range - maintains consistent gain in programmable gain amplifiers |
| Low power consumption | 35µW typical - extends battery life in portable test equipment and remote telemetry nodes |
| MIL-grade temperature range | -55°C to +125°C operation with CERDIP packaging - meets MIL-STD-883 screening requirements for defense platforms |
| Break-before-make timing | 25ns typical (MAX353-specific) - prevents momentary short-circuits during channel switching in power-sensitive analog muxes |
Applications
| Guidance and Control Systems | Military Radios |
|---|---|
|
Use Scenario: Signal routing of inertial measurement unit (IMU) outputs to redundant flight computers under vibration and thermal cycling. IC Role / Device Role / Timing Role: Precision analog switch selecting between primary and backup sensor channels with sub-200ns switching and zero cross-talk. Use Value: Guaranteed ≤2Ω RON match and ≤10pC charge injection preserve ADC linearity and minimize calibration drift across temperature extremes. |
Use Scenario: Multiplexing RF front-end calibration signals and audio paths in manpack radios deployed in desert and arctic conditions. IC Role / Device Role / Timing Role: Dual-mode (NO/NC) switch enabling simultaneous antenna path selection and audio loopback diagnostics. Use Value: -55°C to +125°C operation and >2000V ESD rating ensure uninterrupted function during rapid thermal transients and field handling. |
| Heads-Up Displays (HUD) | Battery-Operated Test Equipment |
|
Use Scenario: Routing video sync pulses and analog intensity signals from multiple display generators to a shared projection driver. IC Role / Device Role / Timing Role: Low-charge-injection analog switch preventing image ghosting during dynamic brightness adjustments. Use Value: ≤10pC charge injection and ∆3Ω max RON flatness maintain pixel-level grayscale fidelity across full luminance range. |
Use Scenario: Channel selection in handheld multimeters and portable oscilloscopes requiring microamp-level leakage and millisecond settling. IC Role / Device Role / Timing Role: Low-leakage (≤6nA @ +85°C), low-power (35µW) switch enabling >100-hour battery life in Class I safety-rated instruments. Use Value: Single-supply +12V operation simplifies power architecture while CERDIP packaging resists humidity-induced parameter shift. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar quad SPST analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX353EJE | Same die, -40°C to +85°C temp range, identical pinout and electrical specs except extended temp limits | Suitable for commercial/industrial use but not qualified for extended cold-start or high-temperature avionics | Select MAX353MJE when operation below -40°C or above +85°C is required; MAX353EJE suffices for non-military grade designs |
| ADG424BRZ | 44V supply rating, 45Ω RON, 25pC charge injection, -40°C to +85°C, SOIC-16 package | Lacks NO/NC mixing; higher leakage (10nA @ +85°C); no CERDIP option | Use ADG424BRZ only if SOIC packaging and relaxed leakage/timing specs are acceptable; not drop-in for MAX353MJE |
Compared with MAX353EJE and ADG424BRZ, the MAX353MJE uniquely combines extended temperature operation, mixed NO/NC topology, and hermetic CERDIP packaging-making it irreplaceable for mission-critical analog routing where environmental resilience and signal integrity are non-negotiable.
Availability
MAX353MJE is available at Aetrix Electronics and suitable for guidance and control systems, military radios, heads-up displays, and battery-operated test equipment requiring stable component supply across extreme temperature profiles and long production lifecycles.
Supply support for MAX353MJE includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) is a U.S.-based semiconductor company specializing in high-performance analog, mixed-signal, and power management ICs for demanding industrial, automotive, and defense applications.
The MAX351/MAX352/MAX353 family was engineered specifically for precision analog signal routing in mil-aero systems-prioritizing low leakage, matched on-resistance, and extended temperature reliability over cost or consumer-grade integration.
FAQ
What is the maximum analog signal voltage range supported by the MAX353MJE?
The MAX353MJE supports rail-to-rail analog signal handling up to ±15.5V when operated with ±16.5V supplies, enabled by its 44V breakdown voltage. This allows direct interfacing with high-voltage sensors and actuators without external level-shifting circuitry, and the specification is guaranteed across its full -55°C to +125°C operating range.
Does the MAX353MJE require separate logic and analog supplies?
No-the MAX353MJE uses a single VL pin that can be tied to either +5V for TTL compatibility or directly to V+ for CMOS-level inputs. Its logic inputs draw negligible current (<0.5µA), so no dedicated logic supply regulator is needed. The device operates with either dual supplies (±4.5V to ±20V) or a single positive supply (+10V to +30V), with V− connected to ground in single-supply mode.
How does the mixed NO/NC configuration of the MAX353MJE differ from the MAX351 and MAX352?
The MAX353MJE integrates two normally open (pins NO1, NO4) and two normally closed (pins NC2, NC3) switches in one package, whereas MAX351 has four NC and MAX352 has four NO. This hybrid topology enables simultaneous enable/disable of complementary signal paths-such as primary/backup sensor routing-without external inverters, reducing board area and propagation delay compared to using discrete MAX351/MAX352 pairs.
Is the MAX353MJE pin-compatible with other variants in the MAX35x family?
Yes-the MAX353MJE shares identical pinout and footprint with all MAX351/MAX352/MAX353 variants in the 16-pin CERDIP package (e.g., MAX353EJE, MAX351MJE). Electrical behavior differs only in channel configuration (NO/NC assignment) and temperature grading; no PCB layout changes are required when substituting within the same package type.
What is the guaranteed charge injection specification for the MAX353MJE, and why does it matter?
The MAX353MJE guarantees ≤10pC charge injection, measured with CL = 1.0nF, VGEN = 0V, and RGEN = 0Ω. This low value minimizes voltage glitches on high-impedance nodes-critical in sample-and-hold circuits, precision DAC output buffering, and sensor front-ends-where even picocoulomb-level injection causes measurable settling errors or baseline drift.
Can the MAX353MJE be used in single-supply +12V systems with TTL-level control inputs?
Yes-the MAX353MJE supports single-supply operation from +10V to +30V. For TTL compatibility, connect VL to +5V while powering V+ at +12V and V− to ground. Input thresholds remain valid (VINH = 2.4V, VINL = 0.8V), and all key specs-including on-resistance, leakage, and switching speed-are characterized and guaranteed under these conditions per the datasheet's "Single Supply" electrical characteristics table.
MAX353MJE Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- Switch Circuit:
- SPST - NO/NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 35Ohm
- Channel-to-Channel Matching (ΔRon):
- 2Ohm (Max)
- Voltage - Supply, Single (V+):
- 10V ~ 30V
- Voltage - Supply, Dual (V±):
- ±4.5V ~ 20V
- Switch Time (Ton, Toff) (Max):
- 175ns, 145ns
- -3db Bandwidth:
- -
- Charge Injection:
- 5pC
- Channel Capacitance (CS(off), CD(off)):
- 9pF, 9pF
- Current - Leakage (IS(off)) (Max):
- 250pA
- Crosstalk:
- -85dB @ 1MHz
- Operating Temperature:
- -55°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- 16-CERDIP
MAX353MJE FAQ
1.How can I place an order for MAX353MJE through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX353MJE on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX353MJE reliable?
The price and inventory of MAX353MJE are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX353MJE is usually 5 days.
3.What payment methods are accepted for MAX353MJE?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX353MJE transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX353MJE?
MAX353MJE orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX353MJE order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX353MJE?
For technical support, including MAX353MJE datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX353MJE requirements.
6.How does Aetrix verify that MAX353MJE is sourced from the original manufacturer or authorized distributors?
All MAX353MJE products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX353MJE meets industry standards.
7.What is the process for return or replacement of MAX353MJE?
All MAX353MJE units undergo pre-shipment inspection (PSI). If there is an issue with MAX353MJE, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX353MJE part is unused and in its original packaging.
Return procedure for MAX353MJE:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX353MJE Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
