My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4052ACEE+
- Part No.:
- MAX4052ACEE+
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SSOP (0.154", 3.90mm Width)
- Datasheet:
-
MAX4052ACEE+.pdf
- Description:
- IC SWITCH SP4T X 2 100OHM 16QSOP
- Quantity:
- Payment:
- Shipping:
Inventory:152
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4052ACEE+ from Maxim Integrated is a dual 4-channel CMOS analog multiplexer configured for bidirectional signal routing in low-voltage systems. It supports ±2.7V to ±8V dual supplies or +2.7V to +16V single supply, delivers 100Ω typical on-resistance at ±5V, guarantees ≤6Ω channel-to-channel on-resistance match (A-suffix), and enables rail-to-rail analog switching with <0.1nA off-leakage at +25°C - ideal for precision data-acquisition front-ends.
For engineers reviewing the MAX4052ACEE+ datasheet, MAX4052ACEE+ pinout, MAX4052ACEE+ application, or MAX4052ACEE+ equivalent, key selection criteria include guaranteed on-resistance flatness, TTL/CMOS-compatible logic thresholds (0.8V–2.4V), break-before-make timing (≤75ns), high off-isolation (<–90dB @100kHz), and QSOP-16 package compatibility with space-constrained mixed-signal PCB layouts.
Technical Context
The MAX4052ACEE+ implements two independent 4:1 analog multiplexers using matched CMOS transmission gates, each controlled by three address bits (ADDA, ADDB, INH) and sharing V+, V-, and GND supply rails. Its A-suffix grade ensures production-tested on-resistance matching (≤6Ω) and flatness across the full analog signal range (±3V).
Internal logic-level translators isolate digital control signals from analog supplies, enabling TTL/CMOS compatibility across supply voltages from +2.7V to +16V or ±2.7V to ±8V. ESD protection diodes clamp analog pins to V+ and V−, limiting signal excursion but preserving low leakage (0.1nA @25°C) and low distortion (<0.04% @600Ω).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Supply Range | ±2.7V to ±8V dual or +2.7V to +16V single - supports battery-powered and industrial rail-flexible designs |
| On-Resistance (RON) | 100Ω max at ±5V - ensures minimal signal attenuation in sensor and audio paths |
| RON Match | ≤6Ω (max–min) between channels - critical for ratiometric measurements and gain-matching |
| Off-Leakage Current | 0.1nA max at +25°C - preserves accuracy in high-impedance transducer interfaces |
| Logic Thresholds | 0.8V (low), 2.4V (high) - ensures reliable switching with 3.3V/5V microcontrollers without level shifters |
| Off-Isolation | <–90dB @100kHz (50Ω) - prevents crosstalk between active and inactive channels |
| Turn-On Time | ≤200ns @±5V - suitable for multiplexed ADC sampling up to ~1MHz effective rate |
Pinout & Package
MAX4052ACEE+ is housed in a 16-pin QSOP (Quarter-Size Outline Package) with 0.15mm lead pitch and 3.9mm × 4.9mm body size, optimized for automated assembly and thermal performance in compact layouts.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| V+ | Positive analog/digital supply | Drives internal CMOS gates and sets upper analog signal limit; must be ≥2.7V above V− |
| V− | Negative analog supply | Sets lower analog signal limit; tied to GND for single-supply operation |
| GND | Digital ground reference | Reference for logic inputs only; no analog current path to GND |
| INH | Digital inhibit input | Active-high global disable; pulls all switches open when logic high |
| ADDA, ADDB | Channel select address lines | Binary-encoded control (00–11) selecting one of four NOx inputs per multiplexer |
| COMA, COMB | Common analog terminals | Bidirectional I/O ports - either may serve as input or output per channel |
| NO0A–NO3A, NO0B–NO3B | Normally-open analog inputs | Eight total switchable paths; interchangeable with NC pins per datasheet note |
Key Features
| Feature | Design Value |
|---|---|
| PIN-compatible with 74HC4052 | Drop-in replacement for legacy logic-controlled analog muxes without layout change |
| Rail-to-rail analog signal handling | Supports input/output signals spanning V− to V+ - eliminates external biasing in ±5V systems |
| Guaranteed RON flatness | ≤10Ω variation over full analog range - maintains consistent gain in programmable-gain amplifiers |
| Low charge injection (≤10pC) | Minimizes voltage glitch on sampled-hold capacitors - improves ADC acquisition fidelity |
| Break-before-make switching | ≥30ns minimum interval - prevents momentary shorting between channels during address changes |
Applications
| Audio Signal Routing | Data-Acquisition Front-End |
|---|---|
Use Scenario: Switching between multiple microphone or line-level inputs in portable audio mixers. IC Role / Device Role / Timing Role: Dual 4:1 analog multiplexer enabling selectable input path routing under microcontroller control. Use Value: 0.04% THD and <–90dB crosstalk preserve signal integrity across 20Hz–20kHz bandwidth. | Use Scenario: Multiplexing 8 sensor outputs (thermocouples, RTDs) into a single precision ADC. IC Role / Device Role / Timing Role: Low-leakage, matched-on-resistance analog switch front-end for ratiometric measurement systems. Use Value: 0.1nA off-leakage and ≤6Ω RON match minimize offset/gain errors in high-Z sensor interfaces. |
| Communications Interface | Battery-Powered Instrumentation |
Use Scenario: Selecting between RF front-end test points or calibration paths in handheld spectrum analyzers. IC Role / Device Role / Timing Role: High-isolation analog switch isolating signal paths during self-test or calibration sequences. Use Value: <–90dB off-isolation prevents signal bleed-through that would corrupt calibration accuracy. | Use Scenario: Managing power domain routing and sensor selection in ultra-low-power environmental monitors. IC Role / Device Role / Timing Role: Low-quiescent-current analog mux enabling wake-on-event sensor scanning. Use Value: 10µA max supply current and +2.7V minimum operation extend battery life in coin-cell applications. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog multiplexer applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4052AESE+ | Same electrical specs; packaged in 16-pin narrow SO instead of QSOP | SOIC footprint requires larger PCB area but offers easier manual rework | Select for prototyping or where SOIC hand-soldering is preferred over QSOP pick-and-place |
| ADG708BRUZ | 8-channel single mux (not dual 4-channel); 4Ω RON match; 3.3V-only supply (1.8–3.6V) | Lacks dual independent banks; incompatible with ±5V or >3.6V systems | Select only for 3.3V-only, single-bank architectures requiring tighter RON match |
Compared with MAX4052AESE+ and ADG708BRUZ, the MAX4052ACEE+ uniquely combines dual independent 4:1 mux functionality, ±5V compatibility, and QSOP-16 packaging - making it optimal for space-constrained, multi-rail industrial data loggers requiring channel isolation.
Availability
MAX4052ACEE+ is available at Aetrix Electronics and suitable for battery-operated equipment, audio and video signal routing, and low-voltage data-acquisition systems requiring stable component supply across extended temperature ranges (0°C to +70°C).
Supply support for MAX4052ACEE+ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs precision analog and mixed-signal ICs for industrial, medical, and communications applications.
The MAX4051/A–MAX4053/A family was engineered to replace legacy 74HC analog switches with enhanced on-resistance matching, lower leakage, and wider supply flexibility - targeting high-fidelity signal routing in portable and embedded systems.
FAQ
What is the operating temperature range for MAX4052ACEE+?
The MAX4052ACEE+ is specified for operation from 0°C to +70°C. This commercial-grade temperature range is confirmed in the Ordering Information table, where "C" suffix denotes 0°C to +70°C, and "E" in "ACEE" maps to the QSOP package variant within that range. The device's electrical characteristics - including on-resistance, leakage, and timing - are fully guaranteed across this interval.
Does MAX4052ACEE+ support single-supply operation?
Yes, MAX4052ACEE+ supports single-supply operation from +2.7V to +16V. When used in single-supply mode, V− is connected to GND, and analog signals swing from GND to V+. The datasheet confirms rail-to-rail capability under these conditions, with on-resistance rising predictably (e.g., 225Ω max at +5V) while maintaining guaranteed leakage and isolation specs.
What is the function of the INH pin on MAX4052ACEE+?
The INH (Inhibit) pin on MAX4052ACEE+ is an active-high digital control input that globally disables all analog switches. When INH is driven logic high, all eight channels open regardless of ADDA/ADDB state. When INH is low, channel selection proceeds normally via the address inputs - providing fail-safe shutdown or system-level muting capability.
How does MAX4052ACEE+ differ from the non-A version (e.g., MAX4052CEEE+)?
The "A" suffix in MAX4052ACEE+ indicates full characterization and production testing for on-resistance match (≤6Ω), on-resistance flatness, and low leakage (0.1nA @25°C). Non-A versions (e.g., MAX4052CEEE+) guarantee looser match (≤12Ω) and higher leakage (1nA @25°C), making the A-suffix essential for precision ratiometric or low-offset applications.
Can MAX4052ACEE+ be used with bipolar ±3V supplies?
Yes, MAX4052ACEE+ is fully rated for bipolar supplies from ±2.7V to ±8V. At ±3V, it maintains rail-to-rail analog operation (–3V to +3V), with on-resistance increasing moderately (typ. 125Ω) while preserving sub-nA leakage and <–90dB off-isolation - validated in the Electrical Characteristics tables for dual-supply conditions.
MAX4052ACEE+ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Active
- Switch Circuit:
- SP4T
- Multiplexer/Demultiplexer Circuit:
- 4:1
- Number of Circuits:
- 2
- On-State Resistance (Max):
- 100Ohm
- Channel-to-Channel Matching (ΔRon):
- 6Ohm (Max)
- Voltage - Supply, Single (V+):
- 2V ~ 16V
- Voltage - Supply, Dual (V±):
- ±2.7V ~ 8V
- Switch Time (Ton, Toff) (Max):
- 175ns, 150ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 2pF, 2pF
- Current - Leakage (IS(off)) (Max):
- 100pA
- Crosstalk:
- -90dB @ 100kHz
- Operating Temperature:
- 0°C ~ 70°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-QSOP
MAX4052ACEE+ FAQ
1.How can I place an order for MAX4052ACEE+ through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4052ACEE+ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4052ACEE+ reliable?
The price and inventory of MAX4052ACEE+ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4052ACEE+ is usually 5 days.
3.What payment methods are accepted for MAX4052ACEE+?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4052ACEE+ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4052ACEE+?
MAX4052ACEE+ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4052ACEE+ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4052ACEE+?
For technical support, including MAX4052ACEE+ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4052ACEE+ requirements.
6.How does Aetrix verify that MAX4052ACEE+ is sourced from the original manufacturer or authorized distributors?
All MAX4052ACEE+ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4052ACEE+ meets industry standards.
7.What is the process for return or replacement of MAX4052ACEE+?
All MAX4052ACEE+ units undergo pre-shipment inspection (PSI). If there is an issue with MAX4052ACEE+, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4052ACEE+ part is unused and in its original packaging.
Return procedure for MAX4052ACEE+:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4052ACEE+ Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
