My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4052AESE+T
- Part No.:
- MAX4052AESE+T
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
MAX4052AESE+T.pdf
- Description:
- IC SWITCH SP4T X 2 100OHM 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:623
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4052AESE+T from Maxim Integrated is a dual 4-channel CMOS analog multiplexer configured for bidirectional signal routing in low-voltage systems. It supports ±2.7V to ±8V dual supplies or +2.7V to +16V single supply, delivers 100Ω typical on-resistance at ±5V, 6Ω guaranteed channel-to-channel on-resistance match, and 0.1nA max off-leakage at +25°C. It is used in battery-powered audio/video routing and low-voltage data-acquisition front-ends.
For engineers reviewing the MAX4052AESE+T datasheet, MAX4052AESE+T pinout, MAX4052AESE+T application, or MAX4052AESE+T equivalent, key selection criteria include guaranteed on-resistance flatness (≤10Ω), rail-to-rail analog signal handling, TTL/CMOS logic compatibility at +5V, break-before-make timing (≤90ns), and -90dB off-isolation at 100kHz - all validated across -40°C to +85°C.
Technical Context
The MAX4052AESE+T implements two independent 4:1 analog multiplexers using matched CMOS transmission gates. Each section uses three address inputs (ADDA, ADDB, INH) to select one of four NOx inputs to route to its common (COMA or COMB) terminal, with no internal decoding beyond binary selection logic.
Its architecture ensures symmetrical conduction in both directions, zero DC bias requirement on analog paths, and isolation between logic and analog domains via level-shifting circuitry. The A-suffix guarantees production-tested on-resistance matching (≤6Ω), on-resistance flatness (≤10Ω), and leakage performance - distinguishing it from the non-A MAX4052 series.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Supply Range | ±2.7V to ±8V dual or +2.7V to +16V single - enables operation in portable, industrial, and mixed-supply systems without level shifters. |
| On-Resistance (RON) | 100Ω max at ±5V - ensures minimal signal attenuation and gain error in precision sensor or audio paths. |
| RON Match | 6Ω max between channels - critical for multi-channel instrumentation where gain/phase tracking matters. |
| Off-Leakage Current | 0.1nA max at +25°C - preserves accuracy in high-impedance, low-current applications like pH sensors or photodiode front-ends. |
| Off-Isolation | <-90dB at 100kHz (50Ω) - suppresses crosstalk between inactive channels in dense multiplexed systems. |
| Logic Thresholds | VIL = 0.8V, VIH = 2.4V at +5V - ensures reliable TTL/CMOS interfacing without external translators. |
| Turn-On Time | 90ns max - supports sampling rates up to ~5MHz in data-acquisition systems with tight timing budgets. |
Pinout & Package
MAX4052AESE+T is housed in a 16-pin narrow SOIC (SO) package (body width 3.9mm), RoHS-compliant and moisture-sensitive level 1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 2, 4, 5 | NO0A–NO3A | Analog inputs for multiplexer A; bidirectional, rail-to-rail capable, interchangeable with COMA. |
| 3 | COMA | Common terminal for multiplexer A; connects to selected NOxA channel when enabled. |
| 11, 12, 14, 15 | NO0B–NO3B | Analog inputs for multiplexer B; electrically identical to NOxA pins, isolated from A-section. |
| 13 | COMB | Common terminal for multiplexer B; independent signal path from COMA. |
| 9, 10, 6 | ADDA, ADDB, INH | Digital address/control inputs; INH high disables both muxes; ADD bits select active channel (00–11). |
| 16, 7, 8 | V+, V-, GND | Power rails: V+ and V- set analog signal range; GND is digital reference only - no analog ground connection. |
Key Features
| Feature | Design Value |
|---|---|
| PIN-Compatible with 74HC4052 | Direct drop-in replacement for legacy HC4052 designs without PCB changes - preserves layout and firmware. |
| Guaranteed RON Flatness | ≤10Ω variation over full analog signal range (±3V) - minimizes distortion in AC-coupled audio or video signals. |
| Rail-to-Rail Signal Handling | Supports analog inputs from V- to V+ - eliminates need for external biasing in single-supply sensor interfaces. |
| Low Charge Injection | ≤10pC - reduces settling error in sample-and-hold or switched-capacitor circuits at high sampling rates. |
| Break-Before-Make Switching | ≤90ns interval - prevents momentary shorting between channels during address transitions, critical for fault-tolerant routing. |
Applications
| Battery-Powered Audio Routing | Low-Voltage Data Acquisition |
|---|---|
Use Scenario: Selecting between multiple microphone or line-level audio sources in a portable mixer or voice recorder. IC Role / Device Role / Timing Role: Dual 4:1 analog multiplexer enabling flexible input source selection with minimal THD (<0.04%) and crosstalk (<-90dB). Use Value: Preserves signal fidelity across battery voltage sag (down to +2.7V) while consuming <20µA total supply current. | Use Scenario: Scanning 8 thermistor or RTD sensor outputs into a single ADC channel in an industrial temperature monitor. IC Role / Device Role / Timing Role: Precision analog switch providing matched on-resistance (≤6Ω) and ultra-low off-leakage (0.1nA) to avoid measurement drift. Use Value: Enables <1 LSB error contribution from switch resistance mismatch in 16-bit systems with high-impedance sensors. |
| Communications Signal Switching | Video Signal Multiplexing |
Use Scenario: Routing RS-232/RS-485 transceiver lines or modem interface signals in a field-programmable communications gateway. IC Role / Device Role / Timing Role: Bidirectional analog switch supporting DC-coupled serial data paths up to 1MHz with <-90dB off-isolation. Use Value: Prevents signal coupling between active and standby communication ports, improving noise immunity and EMI compliance. | Use Scenario: Switching between composite video, S-video, or RGB inputs in a compact AV receiver or video wall controller. IC Role / Device Role / Timing Role: Wideband analog multiplexer delivering flat frequency response to 50MHz and low distortion (<0.04%) at 600Ω loads. Use Value: Maintains color fidelity and sync integrity across video standards without external amplification or equalization. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog multiplexer applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4052ESE+T | No production-tested RON match or flatness guarantee; 12Ω max RON mismatch vs. 6Ω for A-version. | Suitable for cost-sensitive, non-precision applications where channel matching is not critical. | Select MAX4052ESE+T only if leakage <1nA and RON match >6Ω are acceptable. |
| ADG408BRUZ | Single 8:1 mux (not dual 4:1); 100Ω RON but no guaranteed match spec; higher 25nA off-leakage at +25°C. | Requires PCB redesign due to different pinout and single-mux topology; less suitable for parallel dual-channel routing. | Choose ADG408BRUZ only when consolidating to single 8-channel path and higher leakage is tolerable. |
Compared with MAX4052ESE+T and ADG408BRUZ, the MAX4052AESE+T uniquely delivers production-guaranteed 6Ω channel matching and 0.1nA off-leakage - making it the only option for high-accuracy, dual-path multiplexing in battery-constrained systems.
Availability
MAX4052AESE+T is available at Aetrix Electronics and suitable for battery-operated equipment, low-voltage data-acquisition systems, and communications circuits requiring stable component supply across extended temperature ranges (-40°C to +85°C).
Supply support for MAX4052AESE+T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs precision analog, mixed-signal, and power-management ICs for demanding industrial, medical, and communications applications.
The MAX405xA family targets low-voltage, high-fidelity analog signal routing - emphasizing guaranteed matching, ultra-low leakage, and rail-to-rail operation for portable and precision measurement systems.
FAQ
What is the operating temperature range for MAX4052AESE+T?
The MAX4052AESE+T is rated for operation from -40°C to +85°C. This extended industrial temperature range is confirmed in the Ordering Information table and applies specifically to the AESE package variant. It ensures reliable performance in automotive cabin modules, outdoor instrumentation, and factory-floor controllers where ambient temperatures fluctuate widely.
Does MAX4052AESE+T support single-supply operation?
Yes, MAX4052AESE+T supports single-supply operation from +2.7V to +16V with V- tied to GND. At +3V, on-resistance rises to 700Ω max; at +5V, it is 225Ω max; and at +12V, it drops to ~100Ω. The device maintains rail-to-rail analog signal capability and TTL/CMOS logic compatibility across this full range - verified in Electrical Characteristics tables for single +3V, +5V, and +12V conditions.
How does the INH pin function on MAX4052AESE+T?
The INH (Inhibit) pin on MAX4052AESE+T is an active-high digital control input. When driven high (≥2.4V at +5V supply), it forces both multiplexer sections into high-impedance off-state regardless of ADDA/ADDB settings. When low (≤0.8V), normal address decoding resumes. This allows global enable/disable control - essential for power sequencing, fault shutdown, or shared-bus arbitration in multi-device systems.
Is MAX4052AESE+T pin-compatible with the standard 74HC4052?
Yes, MAX4052AESE+T is pin-compatible with industry-standard 74HC4052 in the 16-pin SOIC package. Pin assignments for NO0A–NO3A, COMA, NO0B–NO3B, COMB, ADDA, ADDB, INH, V+, V-, and GND match exactly. However, MAX4052AESE+T offers superior specs: lower on-resistance (100Ω vs. ~120Ω), tighter RON matching (6Ω vs. unguaranteed), and lower leakage (0.1nA vs. 1nA) - enabling direct upgrade without layout change.
What is the maximum analog signal bandwidth supported by MAX4052AESE+T?
MAX4052AESE+T supports analog signal bandwidth up to 50MHz in 50Ω systems, as shown in the Frequency Response plot (Figure 9). Insertion loss remains ≤-1dB up to 20MHz and ≤-3dB at 50MHz. Off-isolation degrades above 10MHz (≈-45dB at 10MHz, falling ~20dB/decade), so high-frequency routing requires careful layout and termination - especially for RF or fast digital signals.
MAX4052AESE+T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Circuit:
- SP4T
- Multiplexer/Demultiplexer Circuit:
- 4:1
- Number of Circuits:
- 2
- On-State Resistance (Max):
- 100Ohm
- Channel-to-Channel Matching (ΔRon):
- 6Ohm (Max)
- Voltage - Supply, Single (V+):
- 2V ~ 16V
- Voltage - Supply, Dual (V±):
- ±2.7V ~ 8V
- Switch Time (Ton, Toff) (Max):
- 175ns, 150ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 2pF, 2pF
- Current - Leakage (IS(off)) (Max):
- 100pA
- Crosstalk:
- -90dB @ 100kHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
MAX4052AESE+T FAQ
1.How can I place an order for MAX4052AESE+T through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4052AESE+T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4052AESE+T reliable?
The price and inventory of MAX4052AESE+T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4052AESE+T is usually 5 days.
3.What payment methods are accepted for MAX4052AESE+T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4052AESE+T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4052AESE+T?
MAX4052AESE+T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4052AESE+T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4052AESE+T?
For technical support, including MAX4052AESE+T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4052AESE+T requirements.
6.How does Aetrix verify that MAX4052AESE+T is sourced from the original manufacturer or authorized distributors?
All MAX4052AESE+T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4052AESE+T meets industry standards.
7.What is the process for return or replacement of MAX4052AESE+T?
All MAX4052AESE+T units undergo pre-shipment inspection (PSI). If there is an issue with MAX4052AESE+T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4052AESE+T part is unused and in its original packaging.
Return procedure for MAX4052AESE+T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4052AESE+T Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
