My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4052EEE+T
- Part No.:
- MAX4052EEE+T
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SSOP (0.154", 3.90mm Width)
- Datasheet:
-
MAX4052EEE+T.pdf
- Description:
- IC SWITCH SP4T X 2 100OHM 16QSOP
- Quantity:
- Payment:
- Shipping:
Inventory:3,405
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4052EEE+T from Maxim Integrated is a dual 4-channel CMOS analog multiplexer configured for bidirectional signal routing in low-voltage systems. It supports single-supply operation from +2.7V to +16V or dual supplies from ±2.7V to ±8V, delivers rail-to-rail analog switching, and features guaranteed 100Ω on-resistance (±5V), 6Ω channel-to-channel on-resistance match (A-suffix variant), and 0.1nA off-leakage at +25°C - enabling precision signal selection in battery-powered data acquisition.
For engineers reviewing the MAX4052EEE+T datasheet, MAX4052EEE+T pinout, MAX4052EEE+T application, or MAX4052EEE+T equivalent, key selection criteria include its dual 4:1 configuration, A-grade matching/leakage specs, QSOP-16 package compatibility, and TTL/CMOS logic interface with ±5V or +5V supply operation.
Technical Context
The MAX4052EEE+T implements two independent 4:1 analog multiplexers using complementary CMOS switch architecture, each controlled by three digital address inputs (ADDA, ADDB, INH) and sharing V+, V-, and GND. Its internal logic-level translators isolate digital control signals from analog supply rails while enabling rail-to-rail signal handling across the full V+ to V- range.
It guarantees break-before-make switching (tOPEN ≤ 200ns at ±5V), low charge injection (≤10pC), and high off-isolation (<–90dB at 100kHz), making it suitable for low-distortion (<0.04% THD), low-crosstalk (<–90dB) applications where channel integrity and signal fidelity are critical.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Configuration | Dual 4-channel analog multiplexer (2 × 4:1) |
| Supply Range | Single: +2.7V to +16V; Dual: ±2.7V to ±8V - supports portable and industrial rail-flexible designs |
| On-Resistance (RON) | 100Ω max at ±5V - ensures minimal signal attenuation and voltage drop in precision paths |
| RON Match (ΔRON) | 6Ω max (A-suffix) - enables accurate ratiometric measurements and matched gain paths |
| Off-Leakage Current | 0.1nA at +25°C - preserves high-impedance sensor node accuracy over temperature |
| Logic Compatibility | 0.8V to 2.4V thresholds - interoperable with TTL and CMOS logic without level shifters |
| Off-Isolation | <–90dB at 100kHz (50Ω) - suppresses crosstalk between inactive channels in dense routing |
Pinout & Package
MAX4052EEE+T is housed in a 16-pin QSOP (Quarter-Size Outline Package) with 0.15mm lead pitch and standard JEDEC MO-137AC footprint. The package is RoHS-compliant, surface-mountable, and optimized for compact PCB layouts requiring thermal and electrical performance stability.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| V+ | Positive analog/digital supply | Drives internal CMOS switches and logic; sets upper analog signal limit (V+) |
| V- | Negative analog supply | Sets lower analog signal limit (V-); tied to GND for single-supply operation |
| GND | Digital ground reference | Reference for logic inputs only; no analog signal grounding path |
| INH | Digital inhibit input | Active-high global disable; forces all switches open when logic high |
| ADDA, ADDB | Binary address inputs | Select one of four NOx inputs per multiplexer section (00–11) |
| COMA, COMB | Common analog terminals | Shared output/input nodes for each 4:1 mux; bidirectional signal path |
| NO0A–NO3A, NO0B–NO3B | Analog normally-open inputs | Eight independent analog inputs (four per section); interchangeable with NC pins |
Key Features
| Feature | Design Value |
|---|---|
| PIN-compatible with 74HC4052 | Drop-in replacement for legacy logic-controlled analog muxes without layout change |
| Rail-to-rail analog signal handling | Supports input/output signals spanning full V+ to V- range, including ground-referenced signals in single-supply mode |
| Guaranteed low on-resistance flatness | ≤10Ω variation over full analog signal range - maintains consistent gain and linearity |
| Low distortion & crosstalk | <0.04% THD (600Ω), <–90dB crosstalk - preserves audio and measurement signal integrity |
| Break-before-make switching | Guaranteed tOPEN ≤ 200ns - prevents momentary shorting during channel transitions |
Applications
| Audio Signal Routing | Portable Data Acquisition |
|---|---|
Use Scenario: Switching between multiple microphone or line-level inputs in a multi-source audio mixer or codec interface. IC Role / Device Role / Timing Role: Dual 4:1 analog multiplexer selecting active input pair while maintaining signal fidelity and channel separation. Use Value: Enables flexible input configuration with <0.04% THD and <–90dB crosstalk, preserving dynamic range and stereo imaging. | Use Scenario: Multiplexing outputs from 8 sensors (e.g., thermistors, strain gauges) into a single ADC channel in handheld test equipment. IC Role / Device Role / Timing Role: Low-leakage, matched-gain analog switch providing precise ratiometric sampling with minimal offset error. Use Value: 0.1nA off-leakage and 6Ω RON match ensure sub-LSB error in 16-bit systems operating from +3.3V or ±5V rails. |
| Communications Interface | Battery-Operated Instrumentation |
Use Scenario: Routing differential analog signals (e.g., RS-422 receive pairs) through protection or calibration paths in telecom front-ends. IC Role / Device Role / Timing Role: Bidirectional analog switch supporting rail-to-rail signal swing and fast enable timing (tON/tOFF ≤ 275ns). Use Value: High off-isolation (<–90dB) prevents coupling between active and standby communication lines. | Use Scenario: Managing power and signal paths in ultra-low-power IoT sensor nodes powered by coin cells or energy harvesters. IC Role / Device Role / Timing Role: Low-quiescent-current analog switch (I+ ≤ 10µA) enabling duty-cycled sensor readout with minimal standby drain. Use Value: Single-supply operation down to +2.7V and 0.1nA leakage extend battery life while maintaining measurement repeatability. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog multiplexer applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4052AESE+ | Same electrical specs and pinout; SOIC-16 package instead of QSOP-16 | Preferred for through-hole prototyping or higher thermal mass requirements | Select when board space allows larger SOIC footprint and manual soldering is needed |
| ADG708BRUZ | 8-channel single-ended mux (not dual 4:1); 4Ω RON match; 0.5nA leakage at +25°C | Requires different address decoding and lacks independent dual-section control | Choose for higher channel density in space-constrained designs where unified addressing suffices |
Compared with MAX4052AESE+ and ADG708BRUZ, the MAX4052EEE+T offers identical A-grade matching and leakage performance in a smaller QSOP package, with native dual-section control ideal for independent signal routing - avoiding address logic overhead and enabling true parallel channel management.
Availability
MAX4052EEE+T is available at Aetrix Electronics and suitable for battery-operated instrumentation, audio signal routing, and low-voltage data-acquisition systems requiring stable component supply, long-term lifecycle support, and guaranteed A-grade parametric performance.
Supply support for MAX4052EEE+T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs precision analog, mixed-signal, and power-management ICs for demanding industrial, medical, and communications applications.
The MAX4051/A–MAX4053/A family was engineered specifically for low-voltage, low-leakage, rail-to-rail analog multiplexing - targeting portable instrumentation, sensor interfaces, and audio systems where signal integrity and power efficiency are critical.
FAQ
What is the operating temperature range for MAX4052EEE+T?
The MAX4052EEE+T is rated for operation from –40°C to +85°C. This extended industrial temperature range ensures reliable performance in harsh environments such as factory automation, outdoor instrumentation, and automotive cabin electronics - unlike the commercial-grade C-suffix variants limited to 0°C to +70°C.
Does MAX4052EEE+T support single-supply operation?
Yes, MAX4052EEE+T supports single-supply operation from +2.7V to +16V with V– tied to GND. At +3V, typical on-resistance is 700Ω; at +5V, it drops to 225Ω. This flexibility allows use in both ultra-low-power portable devices and higher-voltage industrial signal chains without redesign.
How does the INH pin function on MAX4052EEE+T?
The INH (inhibit) pin on MAX4052EEE+T is an active-high digital input that globally disables both 4:1 multiplexers when driven high. When INH = V+, all switches open regardless of ADDA/ADDB state - providing fail-safe signal isolation during system reset, power sequencing, or fault conditions.
Is MAX4052EEE+T pin-compatible with standard 74HC4052 devices?
Yes, MAX4052EEE+T is pin-compatible with industry-standard 74HC4052 multiplexers. It shares identical pin assignments, logic thresholds (0.8V/2.4V), and functional behavior - allowing direct substitution in existing designs while delivering superior on-resistance matching (6Ω vs. 12Ω), lower leakage (0.1nA vs. 1nA), and wider supply range.
What is the maximum analog signal frequency supported by MAX4052EEE+T?
MAX4052EEE+T maintains flat insertion loss up to 50MHz in 50Ω systems, with off-isolation remaining above –45dB at 10MHz. For high-fidelity audio (20Hz–20kHz) and medium-speed data acquisition (<1MHz), its <0.04% THD and <–90dB crosstalk ensure minimal signal degradation without external compensation.
MAX4052EEE+T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Circuit:
- SP4T
- Multiplexer/Demultiplexer Circuit:
- 4:1
- Number of Circuits:
- 2
- On-State Resistance (Max):
- 100Ohm
- Channel-to-Channel Matching (ΔRon):
- 12Ohm (Max)
- Voltage - Supply, Single (V+):
- 2V ~ 16V
- Voltage - Supply, Dual (V±):
- ±2.7V ~ 8V
- Switch Time (Ton, Toff) (Max):
- 175ns, 150ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 2pF, 2pF
- Current - Leakage (IS(off)) (Max):
- 1nA
- Crosstalk:
- -90dB @ 100kHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-QSOP
MAX4052EEE+T FAQ
1.How can I place an order for MAX4052EEE+T through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4052EEE+T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4052EEE+T reliable?
The price and inventory of MAX4052EEE+T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4052EEE+T is usually 5 days.
3.What payment methods are accepted for MAX4052EEE+T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4052EEE+T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4052EEE+T?
MAX4052EEE+T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4052EEE+T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4052EEE+T?
For technical support, including MAX4052EEE+T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4052EEE+T requirements.
6.How does Aetrix verify that MAX4052EEE+T is sourced from the original manufacturer or authorized distributors?
All MAX4052EEE+T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4052EEE+T meets industry standards.
7.What is the process for return or replacement of MAX4052EEE+T?
All MAX4052EEE+T units undergo pre-shipment inspection (PSI). If there is an issue with MAX4052EEE+T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4052EEE+T part is unused and in its original packaging.
Return procedure for MAX4052EEE+T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4052EEE+T Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
