My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4053ACEE-T
- Part No.:
- MAX4053ACEE-T
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SSOP (0.154", 3.90mm Width)
- Datasheet:
-
MAX4053ACEE-T.pdf
- Description:
- IC SWITCH SPDT X 3 100OHM 16QSOP
- Quantity:
- Payment:
- Shipping:
Inventory:1,859
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4053ACEE-T from Maxim Integrated is a triple single-pole/double-throw (SPDT) CMOS analog switch designed for low-voltage signal routing in precision systems. It operates from ±2.7V to ±8V dual supplies or +2.7V to +16V single supply, delivers 100Ω typical on-resistance at ±5V, guarantees 6Ω channel-to-channel on-resistance match (A-suffix), and supports rail-to-rail analog signals up to ±5V - ideal for battery-powered audio multiplexing and low-leakage data acquisition.
For engineers reviewing the MAX4053ACEE-T datasheet, MAX4053ACEE-T pinout, MAX4053ACEE-T application, or MAX4053ACEE-T equivalent, key selection criteria include guaranteed 0.1nA off-leakage at +25°C, TTL/CMOS-compatible logic thresholds (0.8V–2.4V), <−90dB off-isolation at 100kHz, break-before-make timing, and QSOP-16 package compatibility with space-constrained PCB layouts.
Technical Context
The MAX4053ACEE-T implements three independent SPDT switches using matched CMOS transmission gates, each controlled by a dedicated 2-bit address (ADDA/ADDB per switch) and shared INH inhibit input. Its internal logic-level translators isolate digital control signals from analog supply rails (V+, V−), enabling robust operation across wide voltage ranges without level-shifting circuitry.
All switches feature symmetric conduction paths (NO/NC/COM interchangeable), low charge injection (≤10pC), and flat on-resistance (<10Ω variation over ±3V signal range), making it suitable for bidirectional signal routing in instrumentation front-ends where gain error and crosstalk must be minimized.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Switch Configuration | Three independent SPDT switches (no shared common) |
| On-Resistance (RON) | 100Ω max at ±5V - ensures minimal signal attenuation in 600Ω audio paths |
| On-Resistance Match (∆RON) | 6Ω max between channels - critical for matched-gain multi-channel amplifiers |
| Off-Leakage Current | 0.1nA max at +25°C - preserves accuracy in high-impedance sensor interfaces |
| Off-Isolation | <−90dB at 100kHz (50Ω) - prevents signal bleed between inactive channels |
| Supply Range | ±2.7V to ±8V dual or +2.7V to +16V single - supports portable and industrial rails |
| Logic Compatibility | 0.8V–2.4V thresholds - interoperable with 3.3V/5V TTL and CMOS microcontrollers |
Pinout & Package
MAX4053ACEE-T is housed in a 16-pin QSOP package (5.3mm × 10.2mm, 0.65mm pitch), optimized for automated assembly and thermal performance in compact designs.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| V+ | Positive analog/digital supply | Drives internal CMOS gates and sets upper analog signal limit (+2.7V to +16V) |
| V− | Negative analog supply | Sets lower analog signal limit (−2.7V to −8V); tied to GND for single-supply use |
| GND | Digital ground reference | Reference for logic inputs only; no analog current path to ground |
| INH | Global inhibit control | High disables all three SPDT switches simultaneously (break-before-make enforced) |
| ADDA, ADDB | Channel select address | 2-bit binary control per SPDT section (A/B/C); ADDC not present on MAX4053 |
| COMA, COMB, COMC | Common terminals | Center pins of each SPDT; bidirectional, interchangeable with NO/NC |
| NO0A–NO3A, etc. | Normally-open switch terminals | Eight total NO/NC pins (three SPDTs × two throws); fully interchangeable roles |
Key Features
| Feature | Design Value |
|---|---|
| PIN-compatible with 74HC4053 | Drop-in replacement for legacy logic-controlled analog switches without layout change |
| Guaranteed 6Ω RON match | Enables precision differential signal routing with ≤0.5% gain mismatch across channels |
| 0.1nA off-leakage at +25°C | Supports >10GΩ source impedances in medical ECG front-ends and pH sensor interfaces |
| <−90dB off-isolation | Prevents audible crosstalk in stereo audio routing and RF test equipment switching |
| Rail-to-rail analog swing | Preserves full dynamic range of ±5V op-amp outputs without clipping or distortion |
Applications
| Audio Signal Routing | Low-Voltage Data Acquisition |
|---|---|
Use Scenario: Switching between multiple microphone inputs or headphone outputs in portable audio devices. IC Role / Device Role / Timing Role: Triple SPDT analog switch enabling selectable signal paths with simultaneous mute capability via INH. Use Value: 0.04% THD and <−90dB crosstalk preserve stereo separation and prevent audible artifacts during channel switching. | Use Scenario: Multiplexing high-impedance sensor outputs (e.g., thermocouples, strain gauges) into a single ADC channel. IC Role / Device Role / Timing Role: Low-leakage analog switch isolating sensors during sampling to avoid loading errors. Use Value: 0.1nA off-leakage ensures <1µV offset error in 10MΩ sensor networks at room temperature. |
| Battery-Powered Instrumentation | Communications Circuit Switching |
Use Scenario: Power management and signal path selection in handheld multimeters or portable oscilloscopes. IC Role / Device Role / Timing Role: Dual-supply SPDT switch operating from ±3.3V rails while maintaining rail-to-rail signal integrity. Use Value: ±2.7V minimum supply enables operation down to 3.3V total battery voltage, extending runtime in Li-ion systems. | Use Scenario: Selecting between transmit/receive paths or antenna diversity branches in ISM-band transceivers. IC Role / Device Role / Timing Role: High-isolation analog switch routing RF IF signals below 50MHz with minimal insertion loss. Use Value: Flat 100Ω on-resistance and <−90dB off-isolation maintain 50Ω impedance matching and suppress inter-channel interference. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4053ACPE | Same electrical specs; packaged in 16-pin plastic DIP instead of QSOP | Requires through-hole assembly; larger footprint and higher parasitic capacitance | Select for prototyping or legacy through-hole production where board real estate is not constrained |
| ADG1433BRUZ | Higher on-resistance (1.5Ω typical), wider supply (±15V), but no A-suffix RON match guarantee | Superior voltage range and bandwidth (170MHz), but lacks 6Ω channel matching for precision gain-matched arrays | Select when high-voltage signal routing or RF switching dominates over channel matching requirements |
Compared with MAX4053ACPE and ADG1433BRUZ, the MAX4053ACEE-T uniquely combines QSOP-16 miniaturization, guaranteed 6Ω RON matching, and 0.1nA leakage-making it optimal for space-limited, multi-channel precision analog systems where channel uniformity is non-negotiable.
Availability
MAX4053ACEE-T is available at Aetrix Electronics and suitable for battery-operated equipment, audio and video signal routing, and low-voltage data-acquisition systems requiring stable component supply and long-term manufacturability.
Supply support for MAX4053ACEE-T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) is a semiconductor company specializing in high-performance analog, mixed-signal, and power-management ICs for industrial, communications, and consumer applications.
The MAX405x family was engineered for low-voltage, low-leakage analog signal routing in portable and precision instrumentation-emphasizing rail-to-rail operation, tight RON matching, and TTL/CMOS compatibility without external level shifters.
FAQ
What is the maximum supply voltage rating for MAX4053ACEE-T?
The MAX4053ACEE-T supports absolute maximum ratings of V+ = −0.3V to +17V and V− = +0.3V to −17V, with recommended operating ranges of ±2.7V to ±8V (dual) or +2.7V to +16V (single). Exceeding these limits risks permanent damage due to internal ESD diode conduction, so proper sequencing (V+ first, then V−, then logic) is essential for reliability.
Does MAX4053ACEE-T support true bidirectional signal flow?
Yes, the MAX4053ACEE-T supports fully bidirectional analog signal routing: NO, NC, and COM pins are electrically identical and interchangeable. Signals pass with equal on-resistance and distortion in either direction, enabling flexible use in both input multiplexing and output demultiplexing topologies without redesign.
How does the INH pin function in MAX4053ACEE-T?
The INH (inhibit) pin on the MAX4053ACEE-T is an active-high global disable that forces all three SPDT switches into the open (off) state regardless of address inputs. When pulled high, it enforces break-before-make timing across all channels, preventing momentary short circuits during reconfiguration - critical for protecting downstream circuitry during hot switching.
What is the guaranteed on-resistance flatness for MAX4053ACEE-T?
The MAX4053ACEE-T guarantees 10Ω maximum on-resistance flatness (RFLAT(ON)) over its specified analog signal range (±3V), meaning the difference between peak and minimum RON across the full voltage swing remains ≤10Ω. This ensures consistent gain and minimal harmonic distortion in audio and instrumentation applications.
Can MAX4053ACEE-T operate from a +3.3V single supply?
Yes, the MAX4053ACEE-T is fully functional from a +3.3V single supply (V− = GND), delivering 250Ω typical on-resistance and maintaining 0.1nA off-leakage at +25°C. Logic thresholds remain compatible (0.8V–2.4V), allowing direct interface with 3.3V microcontrollers without level translation - verified in Electrical Characteristics tables for +3V supply conditions.
MAX4053ACEE-T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Switch Circuit:
- SPDT
- Multiplexer/Demultiplexer Circuit:
- 2:1
- Number of Circuits:
- 3
- On-State Resistance (Max):
- 100Ohm
- Channel-to-Channel Matching (ΔRon):
- 6Ohm (Max)
- Voltage - Supply, Single (V+):
- 2V ~ 16V
- Voltage - Supply, Dual (V±):
- ±2.7V ~ 8V
- Switch Time (Ton, Toff) (Max):
- 175ns, 150ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 2pF, 2pF
- Current - Leakage (IS(off)) (Max):
- 100pA
- Crosstalk:
- -90dB @ 100kHz
- Operating Temperature:
- 0°C ~ 70°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-QSOP
MAX4053ACEE-T FAQ
1.How can I place an order for MAX4053ACEE-T through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4053ACEE-T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4053ACEE-T reliable?
The price and inventory of MAX4053ACEE-T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4053ACEE-T is usually 5 days.
3.What payment methods are accepted for MAX4053ACEE-T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4053ACEE-T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4053ACEE-T?
MAX4053ACEE-T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4053ACEE-T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4053ACEE-T?
For technical support, including MAX4053ACEE-T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4053ACEE-T requirements.
6.How does Aetrix verify that MAX4053ACEE-T is sourced from the original manufacturer or authorized distributors?
All MAX4053ACEE-T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4053ACEE-T meets industry standards.
7.What is the process for return or replacement of MAX4053ACEE-T?
All MAX4053ACEE-T units undergo pre-shipment inspection (PSI). If there is an issue with MAX4053ACEE-T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4053ACEE-T part is unused and in its original packaging.
Return procedure for MAX4053ACEE-T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4053ACEE-T Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
