My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4066CEE+
- Part No.:
- MAX4066CEE+
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SSOP (0.154", 3.90mm Width)
- Datasheet:
-
MAX4066CEE+.pdf
- Description:
- IC SWITCH SPST-NOX4 45OHM 16QSOP
- Quantity:
- Payment:
- Shipping:
Inventory:243
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4066CEE+ from Maxim Integrated is a quad, single-pole single-throw (SPST), CMOS analog switch optimized for low-voltage operation (2.0V to 16V supply), delivering 45Ω on-resistance at 12V, 2Ω channel-to-channel matching, and 0.03% THD - ideal for precision audio routing and battery-powered data-acquisition systems.
For engineers reviewing the MAX4066CEE+ datasheet, MAX4066CEE+ pinout, MAX4066CEE+ application, or MAX4066CEE+ equivalent, key selection criteria include guaranteed on-resistance flatness (≤6Ω), sub-1nA off-leakage at +25°C, TTL/CMOS-compatible control inputs, 100MHz bandwidth, and QSOP-16 packaging for space-constrained PCB layouts.
Technical Context
The MAX4066CEE+ implements four independent bilateral SPST switches using complementary CMOS transistor pairs per channel, enabling bidirectional analog signal flow with rail-to-rail voltage handling (0V to V+). Its architecture ensures matched RON across channels and minimal charge injection (≤10pC) for sample-and-hold stability.
Control logic accepts standard TTL/CMOS voltage thresholds (VINL ≤ 0.8V, VINH ≥ 2.4V at V+ = 5V), and internal ESD protection exceeds 2000V (HBM). The device operates over 0°C to +70°C and supports single-supply configurations without negative rails.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-Resistance (RON) | 45Ω max at V+ = 12V - ensures minimal signal attenuation and voltage drop in precision analog paths |
| Channel Matching (∆RON) | 2Ω max - critical for multiplexer accuracy and differential signal integrity |
| Off-Leakage Current | 1nA max at +25°C - preserves signal integrity in high-impedance sensor interfaces and battery-critical standby modes |
| Bandwidth | >100MHz - supports video, fast ADC/DAC switching, and broadband communication signals |
| Total Harmonic Distortion | 0.03% - enables low-noise audio routing without audible degradation |
| Supply Range | +2.0V to +16V - compatible with Li-ion, 3.3V, 5V, and 12V system rails without level-shifting |
| Charge Injection | ≤10pC - minimizes voltage glitch in sample-and-hold and switched-capacitor circuits |
Pinout & Package
MAX4066CEE+ is housed in a 16-pin QSOP package (3.9mm × 4.9mm, 0.635mm pitch), optimized for automated assembly and thermal performance in compact industrial and portable designs.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 3, 8, 11 | NO1–NO4 | Normally open analog terminals - connect to signal sources when corresponding INx is high |
| 2, 4, 9, 10 | COM1–COM4 | Common bidirectional analog nodes - serve as input/output junctions for each switch channel |
| 5, 6, 7, 12 | IN1–IN4 | TTL/CMOS logic control inputs - active-high enables respective NO–COM path |
| 13 | V+ | Positive supply rail - powers analog and logic sections; supports 2.0V–16V operation |
| 16 | GND | Analog/digital ground reference - must be low-impedance for leakage and distortion control |
| 3, 11 | N.C. | No internal connection - left unconnected; no routing or grounding required |
Key Features
| Feature | Design Value |
|---|---|
| Bilateral signal routing | Enables full bidirectional analog conduction (COM ↔ NO), supporting both source and load-side switching in mixed-signal systems |
| Rail-to-rail analog range | Supports signals from GND to V+ - eliminates need for external biasing in single-supply data acquisition |
| Low crosstalk (−86dB) | Prevents coupling between adjacent channels - essential for multi-channel instrumentation and audio mixing |
| Low off-isolation (−58dB) | Ensures strong signal blocking when disabled - improves dynamic range in multiplexed sensor front-ends |
| ESD robustness (>2000V HBM) | Reduces risk of field failure during handling and system integration - meets industrial IEC 61000-4-2 baseline |
Applications
| Audio Signal Routing | Portable Data Acquisition |
|---|---|
Use Scenario: Switching line-level stereo signals between multiple codecs, amplifiers, or headphone outputs in handheld audio devices. IC Role / Device Role / Timing Role: Quad SPST analog switch providing low-distortion, low-leakage signal path selection under microcontroller GPIO control. Use Value: 0.03% THD and 45Ω RON preserve fidelity; 1nA leakage extends battery life in always-on audio monitoring modes. | Use Scenario: Multiplexing sensor outputs (thermocouples, strain gauges) into a shared ADC channel in battery-powered IoT edge nodes. IC Role / Device Role / Timing Role: Precision analog multiplexer enabling sequential sampling with minimal channel-to-channel gain error. Use Value: 2Ω ∆RON matching ensures consistent scaling across channels; 100MHz bandwidth accommodates fast transient capture. |
| Sample-and-Hold Circuits | Communication Interface Switching |
Use Scenario: Controlling hold capacitor charging in precision ADC front-end sample-and-hold stages requiring low charge injection. IC Role / Device Role / Timing Role: Low-charge-injection (≤10pC) SPST switch isolating the hold capacitor during acquisition phase. Use Value: Minimizes voltage step error on hold node - directly improves effective resolution and settling accuracy of 16-bit+ converters. | Use Scenario: Isolating RS-232/RS-485 transceiver lines during power-down or fault conditions in industrial PLC backplanes. IC Role / Device Role / Timing Role: High-voltage-tolerant analog switch disconnecting signal paths while maintaining logic-level control compatibility. Use Value: 16V absolute max rating and rail-to-rail signal handling allow safe operation across ±12V interface voltages without clamping diodes. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4066CSD+ | Same electrical specs, but in 14-pin narrow SO package - larger footprint, lower thermal resistance | Suitable for through-hole or legacy SO-based designs where QSOP reflow isn't supported | Select when board assembly process favors SOIC or thermal dissipation >762mW is required |
| ADG1414BRUZ | Higher RON (1.8Ω typical at 15V), wider temp range (−40°C to +125°C), SPI interface instead of parallel TTL | Targeted at high-reliability industrial/military systems needing serial configuration and extended temperature operation | Choose for programmable control, higher voltage tolerance, or extended temperature compliance - not pin-compatible |
Compared with MAX4066CSD+, the MAX4066CEE+ offers smaller board area and finer pitch for high-density layouts; versus ADG1414BRUZ, it provides simpler GPIO control and lower cost, but lacks SPI configurability and extended temperature support.
Availability
MAX4066CEE+ is available at Aetrix Electronics and suitable for portable medical monitors, industrial data loggers, and professional audio mixers requiring stable component supply, long-term lifecycle assurance, and traceable sourcing.
Supply support for MAX4066CEE+ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) is a U.S.-based semiconductor company specializing in high-performance analog, mixed-signal, and power management ICs for industrial, communications, and consumer applications.
The MAX4066 family targets low-voltage, low-distortion analog signal routing - designed specifically for battery-operated equipment, audio/video switching, and precision data-acquisition systems where leakage, RON matching, and bandwidth are critical.
FAQ
What is the maximum supply voltage rating for MAX4066CEE+?
The MAX4066CEE+ has an absolute maximum supply voltage (V+) of +17V, with recommended operating range from +2.0V to +16V. Operation beyond +16V risks permanent damage, and the device is fully specified at 3V, 5V, and 12V supply levels per its datasheet test conditions.
Does MAX4066CEE+ support bidirectional analog signal flow?
Yes, MAX4066CEE+ supports fully bidirectional analog conduction on all four channels - COM and NO terminals are interchangeable in signal path direction. This allows use as either a switch or multiplexer/demultiplexer without polarity constraints, provided signal voltages remain within 0V to V+.
What is the off-leakage current specification for MAX4066CEE+ at room temperature?
The MAX4066CEE+ (standard MAX4066 variant, not MAX4066A) guarantees a maximum off-leakage current of 1nA at +25°C for both NO and COM terminals, as confirmed in the Electrical Characteristics table for +5V and +12V supplies. This value increases with temperature but remains below 10nA up to +70°C.
Is MAX4066CEE+ pin-compatible with industry-standard logic devices?
Yes, MAX4066CEE+ is pin-compatible with the 74HC4066 in function and pin assignment - both implement quad SPST switches with identical NO/COM/IN layout in their respective packages. However, MAX4066CEE+ offers superior analog performance including lower RON, tighter matching, and enhanced leakage specs.
Can MAX4066CEE+ operate from a 3V supply, and what is its on-resistance under that condition?
Yes, MAX4066CEE+ is fully specified down to +2.0V and operates reliably at 3V. At V+ = 3V, its typical on-resistance is 170Ω (max), as tested with ICOM = −1.0mA and VNO = 1.5V - a trade-off for ultra-low-voltage compatibility while retaining CMOS switch functionality.
MAX4066CEE+ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Active
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 45Ohm
- Channel-to-Channel Matching (ΔRon):
- 500mOhm
- Voltage - Supply, Single (V+):
- 2V ~ 16V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 100ns, 75ns
- -3db Bandwidth:
- 100MHz
- Charge Injection:
- 1pC
- Channel Capacitance (CS(off), CD(off)):
- 9pF, 9pF
- Current - Leakage (IS(off)) (Max):
- 1nA
- Crosstalk:
- -86dB @ 1MHz
- Operating Temperature:
- 0°C ~ 70°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-QSOP
MAX4066CEE+ FAQ
1.How can I place an order for MAX4066CEE+ through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4066CEE+ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4066CEE+ reliable?
The price and inventory of MAX4066CEE+ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4066CEE+ is usually 5 days.
3.What payment methods are accepted for MAX4066CEE+?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4066CEE+ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4066CEE+?
MAX4066CEE+ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4066CEE+ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4066CEE+?
For technical support, including MAX4066CEE+ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4066CEE+ requirements.
6.How does Aetrix verify that MAX4066CEE+ is sourced from the original manufacturer or authorized distributors?
All MAX4066CEE+ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4066CEE+ meets industry standards.
7.What is the process for return or replacement of MAX4066CEE+?
All MAX4066CEE+ units undergo pre-shipment inspection (PSI). If there is an issue with MAX4066CEE+, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4066CEE+ part is unused and in its original packaging.
Return procedure for MAX4066CEE+:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4066CEE+ Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
