My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4395EUD/V+
- Part No.:
- MAX4395EUD/V+
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Category:
- Video Amps and Modules
- Package:
- 14-TSSOP (0.173", 4.40mm Width)
- Datasheet:
-
MAX4395EUD/V+.pdf
- Description:
- IC AMP VOLTAGE FEEDBACK 14TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:2,420
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4395EUD/V+ from Analog Devices is a triple-channel, rail-to-rail output, high-speed voltage-feedback op amp with disable capability per channel. It delivers 85MHz -3dB bandwidth, 500V/μs slew rate, and 0.015% differential gain error-optimized for video line driving into 75Ω loads in surveillance systems and set-top boxes.
For engineers reviewing the MAX4395EUD/V+ datasheet, MAX4395EUD/V+ pinout, MAX4395EUD/V+ application, or MAX4395EUD/V+ equivalent, this page provides verified electrical specs, package mapping to 14-pin TSSOP, disable timing (40ns ON / 80ns OFF), output drive (±50mA), and real-world video interface design context.
Technical Context
The MAX4395EUD/V+ employs BiCMOS voltage-feedback architecture enhanced with current-feedback techniques to achieve high slew rate and wide bandwidth while maintaining unity-gain stability. Its input stage supports common-mode voltage down to VEE and up to VCC − 2.25V, enabling single-supply operation from 4.5V to 11V or dual ±2.25V to ±5.5V.
All three amplifiers feature independent disable inputs (DISABLEA, DISABLEB, DISABLEC), each setting its output to high-impedance (95kΩ) with only 450μA quiescent current per disabled channel. Channel-to-channel isolation exceeds −97dB at DC, critical for multi-channel video routing without crosstalk.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| -3dB Bandwidth | 85MHz - supports full NTSC/PAL video bandwidth and high-definition analog video signals without attenuation. |
| Slew Rate | 500V/μs - enables clean 2VP-P large-signal response up to 90MHz, essential for fast video edge transitions. |
| Differential Gain/Phase Error | 0.015%/0.015° - meets broadcast-grade video fidelity requirements for minimal color distortion. |
| Output Drive | ±50mA - drives 75Ω video lines directly without external buffers, reducing BOM count and layout complexity. |
| Disable Current | 450μA per amplifier - allows dynamic power gating of unused channels in multi-function video processors. |
| Supply Range | Single 4.5V–11V or dual ±2.25V–±5.5V - compatible with standard 5V and ±5V video system rails. |
| Settling Time | 21ns to 0.1% - ensures accurate pixel-level settling in high-resolution analog video digitization paths. |
Pinout & Package
MAX4395EUD/V+ is housed in a RoHS-compliant, lead(Pb)-free 14-pin TSSOP package (package code U14+1), optimized for high-density video PCB layouts with thermal resistance θJA = 100.4°C/W on multilayer boards.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 5, 9 | OUTA / OUTB / OUTC | Amplifier outputs; rail-to-rail swing within 200mV of supplies; drive 75Ω loads directly. |
| 2, 6, 10 | INA− / INB− / INC− | Inverting inputs; support DC-coupled or AC-coupled video signal paths with matched impedance. |
| 3, 7, 11 | INA+ / INB+ / INC+ | Noninverting inputs; common-mode range extends to VEE, enabling ground-referenced video inputs. |
| 4, 8, 12 | DISABLEA / DISABLEB / DISABLEC | Active-low disable control per channel; logic thresholds VIL = VCC − 3V, VIH = VCC − 1.25V. |
| 13 | VEE | Negative supply pin; connect 0.1μF bypass capacitor to ground for noise suppression. |
| 14 | VCC | Positive supply pin; connect 0.1μF bypass capacitor to ground; supports 4.5V–11V operation. |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail output swing | Swings within 200mV of VCC and VEE under 75Ω load-enables full dynamic range utilization in 5V video systems. |
| Independent per-channel disable | Each amplifier can be placed in high-Z state with 450μA current draw-supports dynamic channel power management in multi-format video encoders. |
| Low differential gain/phase error | 0.015%/0.015° at NTSC with 150Ω load-meets SMPTE 253M broadcast video specification for color fidelity. |
| High channel isolation | −97dB DC channel-to-channel isolation-prevents interference between RGB or YUV signal paths in triple-output configurations. |
| Optimized for capacitive loading | Stable with 15Ω series isolation resistor + up to 500pF load-enables direct connection to long coaxial cables or multiplexer switches. |
Applications
| Video Line Driver | Analog-to-Digital Converter Interface |
|---|---|
Use Scenario: Driving composite video signals over 75Ω coaxial cable to monitors or capture cards in surveillance DVRs. IC Role / Device Role / Timing Role: Final-stage buffer amplifier with precise gain flatness and low distortion across 0–10MHz. Use Value: Eliminates need for external termination or level-shifting; maintains 0.1dB gain flatness to 27MHz for sharp video edges. | Use Scenario: Conditioning analog video output before sampling by high-speed ADCs in digital camera image pipelines. IC Role / Device Role / Timing Role: High-fidelity driver ensuring <21ns settling to 0.1% for accurate pixel sampling at >20MSPS. Use Value: Reduces aperture uncertainty and harmonic distortion (−59dBc SFDR at 5MHz), improving SNR in digitized video. |
| CCD Imaging Systems | Set-Top Box Video Output |
Use Scenario: Buffering low-noise CCD sensor outputs to maintain signal integrity in medical or industrial imaging equipment. IC Role / Device Role / Timing Role: Low-noise (13nV/√Hz), low-distortion amplifier with rail-to-rail output for full-well signal swing. Use Value: Preserves CCD's dynamic range and contrast ratio; differential phase/gain errors prevent false color artifacts. | Use Scenario: Generating RGB or component video outputs in consumer STBs with multiple simultaneous video standards. IC Role / Device Role / Timing Role: Triple-channel video driver supporting independent enable/disable per output (e.g., CVBS, YPbPr, VGA). Use Value: Enables hardware-selectable output routing without external logic; 14-pin TSSOP fits compact STB PCB footprints. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-speed video op amp applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4394EUD+T | Quad-channel version in same 14-pin TSSOP; no automotive qualification; identical electrical specs except channel count. | Used where fourth video channel (e.g., auxiliary monitor output) is required; shares same layout footprint. | Select MAX4394EUD+T when quad-channel functionality is needed without changing PCB layout. |
| THS3201CDGNR | Single-channel, 1.8GHz bandwidth, higher power (12.5mA), no disable function; 8-pin MSOP package. | Targeted at RF/IF signal chains beyond video bandwidth; lacks integrated disable and triple-channel integration. | Choose THS3201CDGNR only for ultra-wideband (>100MHz) non-video applications requiring higher speed and no channel disable. |
Compared with MAX4394EUD+T, MAX4395EUD/V+ offers one fewer channel but adds automotive qualification (AEC-Q100 Grade 2); versus THS3201CDGNR, it trades bandwidth for integrated triple-channel operation, disable control, and video-optimized distortion performance-making it uniquely suited for cost-sensitive, space-constrained automotive and industrial video systems.
Availability
MAX4395EUD/V+ is available at Aetrix Electronics and suitable for surveillance video systems, automotive infotainment displays, and broadcast equipment requiring stable component supply, extended temperature operation (−40°C to +85°C), and automotive-grade reliability.
Supply support for MAX4395EUD/V+ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, serving industrial, automotive, communications, and consumer markets.
The MAX4389–MAX4396 family was designed specifically for high-fidelity analog video signal conditioning-emphasizing low distortion, precise gain flatness, and robust drive capability in space-constrained, multi-channel systems.
FAQ
What is the operating temperature range for MAX4395EUD/V+?
The MAX4395EUD/V+ is qualified for operation from −40°C to +85°C and meets AEC-Q100 Grade 2 automotive reliability standards. This extended temperature range ensures stable performance in vehicle cabin environments and industrial enclosures where ambient temperatures fluctuate significantly. The device's thermal characteristics-including θJA = 100.4°C/W on multilayer boards-are validated across this full range.
Does MAX4395EUD/V+ support single-supply operation?
Yes, MAX4395EUD/V+ operates from a single 4.5V to 11V supply. Its input common-mode range extends to the negative rail (VEE, typically ground), and outputs swing rail-to-rail within 200mV of both supply rails under 75Ω load. This enables direct interfacing with ground-referenced video sources and simplifies power architecture in 5V-only systems like set-top boxes and IP cameras.
How does the disable function work on MAX4395EUD/V+?
MAX4395EUD/V+ features three independent active-low disable inputs (DISABLEA, DISABLEB, DISABLEC). When pulled low, each disables its corresponding amplifier, placing the output in high-impedance state (ROUT(OFF) = 40–95kΩ) while drawing only 450μA quiescent current. Disable timing is specified at 40ns turn-on and 80ns turn-off, enabling fast channel switching in video multiplexers without signal glitches.
Can MAX4395EUD/V+ drive 75Ω video loads directly?
Yes, MAX4395EUD/V+ is explicitly characterized to drive 75Ω video loads with ±50mA output current and 0.015% differential gain error. Its output stage delivers full rail-to-rail swing into 75Ω, and the datasheet provides application circuits for video line driving with proper termination. No external current-boosting circuitry is required, reducing component count and board area in video interface designs.
What is the package type and RoHS status of MAX4395EUD/V+?
MAX4395EUD/V+ uses a 14-pin TSSOP package (outline 21-0066, land pattern 90-0113) with lead(Pb)-free, RoHS-compliant construction indicated by the "+" suffix. The "/V" denotes automotive qualification per AEC-Q100 Grade 2. Thermal resistance is θJA = 100.4°C/W on multilayer PCBs, supporting reliable operation in thermally constrained video modules.
MAX4395EUD/V+ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package/Case:
- 14-TSSOP (0.173", 4.40mm Width)
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Active
- Applications:
- Voltage Feedback
- Output Type:
- Rail-to-Rail
- Number of Circuits:
- 4
- -3db Bandwidth:
- 85 MHz
- Slew Rate:
- 500V/µs
- Current - Supply:
- 6 mA
- Current - Output / Channel:
- 95 mA
- Voltage - Supply, Single/Dual (±):
- 4.5V ~ 11V, ±2.25V ~ 5.5V
- Mounting Type:
- Surface Mount
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Supplier Device Package:
- 14-TSSOP
MAX4395EUD/V+ FAQ
1.How can I place an order for MAX4395EUD/V+ through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4395EUD/V+ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4395EUD/V+ reliable?
The price and inventory of MAX4395EUD/V+ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4395EUD/V+ is usually 5 days.
3.What payment methods are accepted for MAX4395EUD/V+?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4395EUD/V+ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4395EUD/V+?
MAX4395EUD/V+ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4395EUD/V+ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4395EUD/V+?
For technical support, including MAX4395EUD/V+ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4395EUD/V+ requirements.
6.How does Aetrix verify that MAX4395EUD/V+ is sourced from the original manufacturer or authorized distributors?
All MAX4395EUD/V+ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4395EUD/V+ meets industry standards.
7.What is the process for return or replacement of MAX4395EUD/V+?
All MAX4395EUD/V+ units undergo pre-shipment inspection (PSI). If there is an issue with MAX4395EUD/V+, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4395EUD/V+ part is unused and in its original packaging.
Return procedure for MAX4395EUD/V+:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4395EUD/V+ Tags
-
LT6552CS8#PBF
Analog Devices Inc.
-
LT6205IS5#TRPBF
Analog Devices Inc.
-
LT6206IMS8#TRPBF
Analog Devices Inc.
-
LT6552CDD#PBF
Analog Devices Inc.
-
LT6552IS8#PBF
Analog Devices Inc.
-
LT1252CS8#PBF
Analog Devices Inc.
-
AD818ARZ-REEL7
Analog Devices Inc.
-
MAX4310EUA+
Analog Devices Inc./Maxim Integrated
-
AD829ARZ
Analog Devices Inc.
-
AD810ARZ
Analog Devices Inc.
-
MAX4310ESA+
Analog Devices Inc./Maxim Integrated
-
MAX4313ESA+
Analog Devices Inc./Maxim Integrated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
