My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4552EEE
- Part No.:
- MAX4552EEE
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SSOP (0.154", 3.90mm Width)
- Datasheet:
-
MAX4552EEE.pdf
- Description:
- IC SW SPST-NOX4 120OHM 16QSOP
- Quantity:
- Payment:
- Shipping:
Inventory:4,044
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4552EEE from Maxim Integrated is a quad, low-voltage, normally open (NO) single-pole/single-throw (SPST) analog switch IC rated for -40°C to +85°C operation in 16-pin QSOP package. It delivers 120Ω max on-resistance at ±5V supplies, 4Ω max channel-to-channel on-resistance match, and ±15kV IEC 1000-4-2 ESD protection on NO/NC pins-enabling robust signal routing in battery-powered test equipment and avionics interfaces.
For engineers reviewing the MAX4552EEE datasheet, MAX4552EEE pinout, MAX4552EEE application, or MAX4552EEE equivalent, key selection criteria include rail-to-rail analog signal handling (±4.5V with ±5V supplies), TTL/CMOS-compatible logic thresholds (1.6V/2.4V), sub-100ns switching times, and verified pin-compatibility with DG212 for drop-in replacement in legacy designs.
Technical Context
The MAX4552EEE implements four independent SPST switches using complementary N- and P-channel MOSFETs driven by level-translated logic inputs. Its internal SCR-based ESD protection activates within nanoseconds during ±15kV contact discharge events, shunting surge current to GND while limiting supply injection via series resistors.
It supports dual supplies (±2V to ±6V) or single supply (+2V to +12V), with V+ internally connected to substrate and logic thresholds scaling with V+ (e.g., 2.4V high threshold at +5V). Analog signal range is rail-to-rail, bounded only by V+ and V-, and off-isolation exceeds -90dB at 100kHz.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-resistance (RON) | 120Ω max at ±5V supplies - ensures minimal signal attenuation in precision data acquisition paths |
| On-resistance match (∆RON) | 4Ω max between channels - critical for matched gain/phase in multi-channel audio or sensor arrays |
| ESD protection | ±15kV per IEC 1000-4-2 on NO/NC pins - eliminates need for external TVS diodes in handheld test gear |
| Switching time (tON/tOFF) | 100ns/100ns typical at ±5V - supports >1MHz multiplexed signal sampling without timing skew |
| Analog signal range | Rail-to-rail (V− to V+) - enables full dynamic range utilization with ±5V or +5V/0V supplies |
| Logic compatibility | TTL/CMOS thresholds (1.6V/2.4V at +5V) - interoperates directly with microcontroller GPIO without level shifters |
| Off-leakage current | 1nA at +25°C, 10nA at +85°C - preserves accuracy in high-impedance sensor front-ends |
Pinout & Package
MAX4552EEE is housed in a 16-pin QSOP (Quarter-size Outline Package) with 0.061" body width and 0.025" lead pitch. The package is RoHS-compliant and rated for -40°C to +85°C industrial operation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 8, 9, 16 | IN1–IN4 | Digital control inputs; active-high logic drives NO switches closed |
| 2, 7, 10, 15 | COM1–COM4 | Analog common terminals; bidirectional signal path endpoints |
| 3, 6, 11, 14 | NO1–NO4 | Normally open analog terminals; connect to COM when IN = HIGH |
| 4 | V− | Negative supply input; tie to GND for single-supply operation |
| 5 | GND | Digital ground reference; SCRs shunt ESD to this pin |
| 12 | N.C. | No internal connection; must remain unconnected |
| 13 | V+ | Positive supply and substrate bias; powers logic and analog switches |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail analog signal handling | Supports full-swing signals from V− to V+, enabling use with bipolar op-amps and ±5V data converters |
| ±15kV IEC 1000-4-2 ESD protection | Integrated SCRs on NO/NC pins eliminate external protection components and reduce BOM count |
| Pin-compatible with DG212 | Direct replacement in existing layouts without PCB revision, preserving design validation effort |
| Low power consumption | <1µW quiescent supply current - extends battery life in portable instrumentation |
| Flat on-resistance profile | 8Ω max variation over signal range - minimizes harmonic distortion in audio routing applications |
Applications
| Test Equipment Signal Routing | Avionics Sensor Multiplexing |
|---|---|
Use Scenario: Channel selection in automated test equipment switching matrices for DMM and oscilloscope front-ends. IC Role / Device Role / Timing Role: Quad SPST switch isolating 4 independent analog measurement paths under microcontroller control. Use Value: 120Ω RON and 4Ω match ensure consistent gain calibration across channels; ±15kV ESD withstand prevents field failures during probe handling. | Use Scenario: Multiplexing pressure, temperature, and inertial sensor outputs in flight control units. IC Role / Device Role / Timing Role: Low-leakage analog switch routing millivolt-level transducer signals to shared ADC inputs. Use Value: 1nA COM off-leakage at +25°C preserves signal integrity; -40°C to +85°C rating meets DO-160 environmental requirements. |
| Battery-Powered Data Loggers | Professional Audio Signal Switching |
Use Scenario: Selecting between multiple sensor inputs in portable environmental monitoring devices. IC Role / Device Role / Timing Role: Low-quiescent-current analog switch enabling >1-year battery life on coin cells. Use Value: <1µW supply current minimizes standby drain; rail-to-rail operation supports wide-output-range sensors without level shifting. | Use Scenario: Input source selection and mute control in digital mixing consoles and stage boxes. IC Role / Device Role / Timing Role: Quad SPST switch managing analog line-level signals with minimal crosstalk. Use Value: -90dB off-isolation at 100kHz prevents audible bleed between channels; 100ns switching avoids pop/click artifacts. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4552ESE | Same electrical specs and pinout; packaged in 16-pin narrow SO instead of QSOP | Preferred where board space allows larger footprint and higher thermal mass is beneficial | Select for improved manufacturability in wave-soldered assemblies or where QSOP reflow yield is marginal |
| DG212DN | Higher 150Ω RON, no integrated ±15kV ESD protection, requires external clamping | Suitable for cost-sensitive industrial controls where ESD risk is mitigated at system level | Choose only when MAX4552EEE's ESD robustness is unnecessary and legacy DG212 layout reuse is mandatory |
Compared with MAX4552ESE and DG212DN, the MAX4552EEE provides identical switching performance in a space-optimized QSOP package with factory-validated ±15kV ESD immunity-reducing system-level protection overhead and enabling compact, field-reliable portable instrumentation designs.
Availability
MAX4552EEE is available at Aetrix Electronics and suitable for battery-operated equipment, test equipment, and avionics requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for MAX4552EEE includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) is a semiconductor company specializing in high-performance analog, mixed-signal, and power management ICs for industrial, communications, and computing markets.
The MAX455x family was designed specifically for ESD-hardened analog signal routing in portable and mission-critical systems-balancing low on-resistance, rail-to-rail operation, and integrated protection without sacrificing speed or leakage performance.
FAQ
What is the maximum supply voltage range supported by the MAX4552EEE?
The MAX4552EEE operates with dual supplies from ±2V to ±6V or a single supply from +2V to +12V. Absolute maximum ratings specify V+ to V− differential up to 13.0V, so ±5V supplies (10V total) are well within safe limits. For reliable operation, ensure supply tolerances and transient spikes do not exceed this 13.0V limit-especially with ±6V rails where ±10% tolerance yields 13.2V.
Does the MAX4552EEE require external ESD protection components?
No, the MAX4552EEE does not require external ESD protection components on its NO/NC pins. It integrates bidirectional SCRs that provide ±15kV protection per IEC 1000-4-2. However, 100nF bypass capacitors on V+ and V− pins are recommended to absorb residual ESD energy shunted to the supplies, ensuring stable operation during and after discharge events.
How does the MAX4552EEE compare to the MAX4551EEE in terms of switch configuration?
The MAX4552EEE contains four normally open (NO) SPST switches, meaning each switch connects COM to NO only when its corresponding IN pin is logic HIGH. In contrast, the MAX4551EEE has four normally closed (NC) switches-COM connects to NC when IN is LOW. Both share identical electrical specs, pinout, and package; only logic polarity and default state differ, making them functionally complementary rather than interchangeable.
Can the MAX4552EEE operate from a +3.3V single supply?
Yes, the MAX4552EEE is fully specified for +2.7V to +3.6V single-supply operation. At +3.3V, typical on-resistance rises to 500Ω, turn-on time increases to 350ns, and logic thresholds shift to 1.1V (low) and 2.0V (high)-all guaranteed across -40°C to +85°C. This makes it viable for low-voltage portable systems where power efficiency outweighs speed or RON requirements.
Is the MAX4552EEE pin-compatible with industry-standard analog switches?
Yes, the MAX4552EEE is explicitly pin-compatible with the DG212, a widely used industry-standard quad SPST analog switch. This allows direct replacement in existing designs without PCB modifications. Pin mapping for IN, COM, NO, V+, V−, GND, and N.C. matches exactly-enabling seamless migration to MAX4552EEE's superior ±15kV ESD protection and lower leakage performance.
MAX4552EEE Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 120Ohm
- Channel-to-Channel Matching (ΔRon):
- 1Ohm
- Voltage - Supply, Single (V+):
- 2V ~ 12V
- Voltage - Supply, Dual (V±):
- ±2V ~ 6V
- Switch Time (Ton, Toff) (Max):
- 110ns, 90ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 3.5pF, 3pF
- Current - Leakage (IS(off)) (Max):
- 1nA
- Crosstalk:
- -90dB @ 100kHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-QSOP
MAX4552EEE FAQ
1.How can I place an order for MAX4552EEE through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4552EEE on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4552EEE reliable?
The price and inventory of MAX4552EEE are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4552EEE is usually 5 days.
3.What payment methods are accepted for MAX4552EEE?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4552EEE transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4552EEE?
MAX4552EEE orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4552EEE order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4552EEE?
For technical support, including MAX4552EEE datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4552EEE requirements.
6.How does Aetrix verify that MAX4552EEE is sourced from the original manufacturer or authorized distributors?
All MAX4552EEE products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4552EEE meets industry standards.
7.What is the process for return or replacement of MAX4552EEE?
All MAX4552EEE units undergo pre-shipment inspection (PSI). If there is an issue with MAX4552EEE, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4552EEE part is unused and in its original packaging.
Return procedure for MAX4552EEE:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4552EEE Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
