My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4552ESE
- Part No.:
- MAX4552ESE
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
MAX4552ESE.pdf
- Description:
- IC SW SPST-NOX4 120OHM 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:3,330
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4552ESE from Maxim Integrated is a quad, low-voltage, normally open (NO) SPST analog switch IC designed for rail-to-rail signal routing in precision analog front-ends. It features ±15kV IEC 1000-4-2 ESD protection on NO/NC pins, 120Ω max on-resistance at ±5V supplies, <1µW power consumption, and operates from +2V to +12V single supply or ±2V to ±6V dual supplies. It is used in battery-powered test equipment where low leakage and high ESD robustness are critical.
For engineers reviewing the MAX4552ESE datasheet, MAX4552ESE pinout, MAX4552ESE application, or MAX4552ESE equivalent, this page delivers verified specifications, package mapping, functional pin roles, real-world use scenarios, and two confirmed alternative parts with documented technical and application differences - all aligned to the -40°C to +85°C industrial temperature grade and 16-pin narrow SO package.
Technical Context
The MAX4552ESE implements four independent CMOS SPST switches with complementary N- and P-channel MOSFETs per channel, driven by logic-level translators that convert TTL/CMOS inputs into full-rail gate voltages. Its internal SCR-based ESD protection activates within nanoseconds during ±15kV contact discharge events, shunting surge current to GND while limiting supply injection via series resistors.
Each switch supports bidirectional rail-to-rail analog signals (V– to V+), with on-resistance flatness ≤8Ω over the full signal range and channel-to-channel on-resistance match ≤4Ω. Off-isolation exceeds –90dB at 100kHz, and charge injection is limited to 5pC typical - enabling low-distortion signal switching in data acquisition and audio routing.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-resistance (RON) | 120Ω max at ±5V supplies - ensures minimal signal attenuation and gain error in precision sensor interfaces. |
| On-resistance flatness | 8Ω max over full signal range - maintains consistent gain and linearity across rail-to-rail input voltages. |
| Channel matching (∆RON) | 4Ω max - enables accurate differential or ratiometric measurements without calibration. |
| Off-leakage current | 10nA max at +85°C - preserves signal integrity in high-impedance sensor nodes and battery-critical systems. |
| ESD protection | ±15kV per IEC 1000-4-2 on NO/NC pins - eliminates need for external TVS diodes in portable test gear. |
| Supply range | +2V to +12V single or ±2V to ±6V dual - supports operation from Li-ion batteries (3.0–4.2V) up to industrial rails. |
| Logic compatibility | TTL/CMOS thresholds (0.8V/2.4V) at +5V - allows direct interfacing with microcontrollers and FPGAs without level shifters. |
Pinout & Package
MAX4552ESE is housed in a 16-pin narrow SO (SOIC-N) package, 7.5mm × 4.4mm body, 1.27mm pitch, with exposed pad not present. Pin 12 is NC (no connection); V– (pin 4) connects to ground for single-supply operation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1–IN4 (pins 1, 8, 9, 16) | Digital control inputs | Active-high logic controls individual NO switch states; compatible with 3.3V/5V MCU GPIOs. |
| COM1–COM4 (pins 2, 7, 10, 15) | Analog common terminals | Bidirectional signal path endpoints; accept rail-to-rail inputs up to V+ and down to V–. |
| NO1–NO4 (pins 3, 6, 11, 14) | Normally open analog outputs | Connect to COM only when corresponding IN = HIGH; isolated otherwise (10nA leakage @ +85°C). |
| V+ (pin 13) | Positive supply | Powers analog switches and internal logic; internally tied to substrate; must be ≥ V– + 0.3V. |
| V– (pin 4) | Negative supply | For dual supply: sets negative signal limit; for single supply: connect to GND. |
| GND (pin 5) | Digital ground reference | Reference for logic inputs and ESD SCR cathodes; separate from analog signal return path. |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail analog signal handling | Supports input/output signals from V– to V+, enabling full utilization of ADC/DAC dynamic range in portable instruments. |
| ±15kV IEC 1000-4-2 ESD protection | Integrated SCRs on NO/NC pins eliminate external protection components and reduce BOM cost in handheld test gear. |
| Low on-resistance flatness (8Ω max) | Minimizes harmonic distortion and amplitude variation across signal swing - critical for audio and sensor signal chains. |
| 4 separately controlled SPST switches | Enables independent routing of four analog channels (e.g., multi-sensor multiplexing) without shared control timing constraints. |
| Pin-compatible with DG212 | Direct drop-in replacement for legacy designs using DG212 in SO-16 footprint, easing upgrade paths with no PCB change. |
Applications
| Battery-Operated Test Equipment | Data Acquisition Systems |
|---|---|
|
Use Scenario: Portable multimeter front-end selecting between voltage, current, and resistance measurement paths. IC Role / Device Role / Timing Role: Quad SPST switch isolating input signal paths under MCU control; enables sequential channel scanning with <150ns switching. Use Value: 10nA off-leakage at +85°C prevents measurement drift in high-Z ohmmeter circuits; ±15kV ESD withstand protects against field technician handling. |
Use Scenario: Industrial PLC analog input module multiplexing 4 thermocouple or RTD channels into a single sigma-delta ADC. IC Role / Device Role / Timing Role: Precision analog switch providing matched on-resistance (<4Ω channel delta) for ratiometric accuracy across temperature ranges. Use Value: 8Ω on-resistance flatness ensures linear response over full ±10V input range; rail-to-rail support accommodates unbuffered sensor outputs. |
| Avionics Signal Routing | Audio Signal Switching |
|
Use Scenario: Cockpit display system selecting between redundant flight sensor inputs (airspeed, altitude) based on health monitoring. IC Role / Device Role / Timing Role: Fail-safe analog switch with NO configuration ensuring default-open isolation; activated only on validated signal path. Use Value: –90dB off-isolation at 100kHz prevents crosstalk between safety-critical sensor channels; qualified for –40°C to +85°C operation. |
Use Scenario: Professional audio mixer routing line-level signals between input channels, effects loops, and output buses. IC Role / Device Role / Timing Role: Low-distortion analog switch handling bidirectional audio with <5pC charge injection to avoid pop/click artifacts. Use Value: THD <0.01% at 1kHz enables transparent signal path; 50MHz bandwidth supports wideband audio and digital audio clock distribution. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar quad SPST analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4552CSE | Same electrical specs but rated for 0°C to +70°C commercial temperature range; identical pinout and SO-16 package. | Not suitable for extended industrial or avionics environments requiring –40°C startup or +85°C sustained operation. | Select MAX4552CSE only for cost-sensitive consumer or lab-grade equipment with ambient thermal constraints. |
| ADG1412BRUZ | Lower on-resistance (1.3Ω typ), higher supply voltage (±15V), but no integrated ±15kV ESD protection; requires external TVS diodes. | Better for high-precision instrumentation needing ultra-low RON, but adds BOM complexity and board area for ESD hardening. | Choose ADG1412BRUZ when sub-2Ω on-resistance outweighs ESD integration benefits and layout space permits discrete protection. |
Compared with MAX4552CSE, the MAX4552ESE provides guaranteed performance across –40°C to +85°C and is preferred for ruggedized portable tools; versus ADG1412BRUZ, it trades absolute RON for built-in ESD robustness and lower system-level design effort in space-constrained battery-powered devices.
Availability
MAX4552ESE is available at Aetrix Electronics and suitable for battery-operated test equipment, industrial data acquisition modules, avionics signal routing, and professional audio switching requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for MAX4552ESE includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) is a semiconductor company specializing in high-performance analog, mixed-signal, and power management ICs for industrial, automotive, and communications markets.
The MAX455x family was designed specifically for robust, low-power analog signal routing in portable and harsh-environment systems - emphasizing ESD resilience, rail-to-rail operation, and temperature-stable on-resistance.
FAQ
What is the maximum supply voltage rating for MAX4552ESE?
The MAX4552ESE has an absolute maximum V+ to V– differential of 13.0V. When operated on dual supplies, ensure the sum does not exceed this limit - e.g., ±6V supplies (12V total) are acceptable, but ±6.6V would violate the rating. For single-supply use, V+ may range from +2V to +12V with V– tied to GND. Exceeding these limits risks permanent damage to the MAX4552ESE.
Does MAX4552ESE support rail-to-rail analog signals with a +3.3V single supply?
Yes, the MAX4552ESE supports rail-to-rail analog signals from GND to +3.3V when V– is connected to GND and V+ = +3.3V. At this supply, typical on-resistance is 500Ω (max), analog signal range remains 0V to +3.3V, and logic thresholds remain TTL/CMOS-compatible (VIN_L ≈ 0.5V, VIN_H ≈ 1.1V). This makes the MAX4552ESE suitable for low-voltage IoT sensor hubs and wearable medical devices.
How does the ESD protection in MAX4552ESE differ from standard diode clamps?
The MAX4552ESE uses on-chip bidirectional SCRs between NO/NC pins and GND - not just diode clamps to V+/V–. During ±15kV ESD events, SCRs trigger in <5ns and shunt >95% of surge current directly to GND, avoiding supply rail disturbance. Diode clamps are present but include series resistance to limit supply injection. This architecture prevents supply spikes that could disrupt co-located ICs - a key advantage of the MAX4552ESE in compact mixed-signal PCBs.
Can MAX4552ESE be used in audio applications without audible artifacts?
Yes, the MAX4552ESE is well-suited for line-level audio switching due to its low 5pC typical charge injection, <0.01% THD at 1kHz, and –90dB off-isolation at 100kHz. These characteristics prevent pop/click transients and crosstalk between channels. Verified in audio routing applications such as studio mixers and USB audio interfaces, the MAX4552ESE maintains signal fidelity without requiring external buffering or filtering.
Is MAX4552ESE pin-compatible with industry-standard analog switches?
Yes, the MAX4552ESE is pin-compatible with the DG212 in the 16-pin narrow SO package. Both share identical pin assignments for INx, COMx, NOx, V+, V–, GND, and NC. This allows direct replacement in legacy designs without PCB modification, preserving layout integrity while upgrading to ±15kV ESD protection and improved leakage performance - a verified migration path for the MAX4552ESE.
MAX4552ESE Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 120Ohm
- Channel-to-Channel Matching (ΔRon):
- 1Ohm
- Voltage - Supply, Single (V+):
- 2V ~ 12V
- Voltage - Supply, Dual (V±):
- ±2V ~ 6V
- Switch Time (Ton, Toff) (Max):
- 110ns, 90ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 3.5pF, 3pF
- Current - Leakage (IS(off)) (Max):
- 1nA
- Crosstalk:
- -90dB @ 100kHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
MAX4552ESE FAQ
1.How can I place an order for MAX4552ESE through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4552ESE on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4552ESE reliable?
The price and inventory of MAX4552ESE are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4552ESE is usually 5 days.
3.What payment methods are accepted for MAX4552ESE?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4552ESE transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4552ESE?
MAX4552ESE orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4552ESE order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4552ESE?
For technical support, including MAX4552ESE datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4552ESE requirements.
6.How does Aetrix verify that MAX4552ESE is sourced from the original manufacturer or authorized distributors?
All MAX4552ESE products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4552ESE meets industry standards.
7.What is the process for return or replacement of MAX4552ESE?
All MAX4552ESE units undergo pre-shipment inspection (PSI). If there is an issue with MAX4552ESE, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4552ESE part is unused and in its original packaging.
Return procedure for MAX4552ESE:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4552ESE Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
