My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4553ESE+
- Part No.:
- MAX4553ESE+
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
MAX4553ESE+.pdf
- Description:
- IC SW SPST-NO/NCX4 120OHM 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:6,027
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4553ESE+ from Maxim Integrated is a quad, low-voltage, SPST analog switch with two normally open (NO) and two normally closed (NC) channels, ±15kV IEC 1000-4-2 ESD protection on NC/NO pins, 120Ω max on-resistance at ±5V supplies, rail-to-rail analog signal handling, and break-before-make timing (5–20ns) for glitch-free switching in audio routing and data acquisition systems.
For engineers reviewing the MAX4553ESE+ datasheet, MAX4553ESE+ pinout, MAX4553ESE+ application, or MAX4553ESE+ equivalent, this device supports dual-supply (±2V to ±6V) or single-supply (+2.7V to +12V) operation, features TTL/CMOS-compatible logic thresholds, and delivers low off-leakage (1nA @ +25°C), flat on-resistance (8Ω max), and matched channel RON (4Ω max) - critical for precision multiplexing and signal integrity in battery-powered test equipment.
Technical Context
The MAX4553ESE+ implements four independent CMOS SPST switches using complementary N- and P-channel MOSFETs per channel, driven by logic-level translators that convert TTL/CMOS inputs into full-rail V+ and V− gate drive signals. Its internal SCR-based ESD protection activates within nanoseconds when NC/NO pins exceed V+ or V−, shunting ±15kV transients to GND without latchup.
It supports break-before-make switching only on channels 1 & 4 (NO) and 2 & 3 (NC), ensuring no momentary short between signal paths during state transitions. Analog signal range spans (V−) to (V+), with leakage currents fully specified across −40°C to +85°C and validated under both dual- and single-supply conditions.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-Resistance (RON) | 120Ω max at ±5V supplies - ensures minimal signal attenuation in 50Ω–600Ω systems |
| RON Flatness | 8Ω max over full signal range - maintains consistent gain/attenuation across rail-to-rail input voltages |
| RON Match Between Channels | 4Ω max - enables precise channel-to-channel tracking in differential or ratiometric applications |
| Off-Leakage Current (ICOM_OFF) | 10nA max at +85°C - preserves accuracy in high-impedance sensor front-ends and sample-hold circuits |
| ESD Protection | ±15kV on NC/NO pins per IEC 1000-4-2 - eliminates need for external TVS diodes in industrial I/O modules |
| Logic Thresholds | VIN_H = 2.4V / VIN_L = 0.8V at +5V supply - guarantees robust noise margin with standard TTL/CMOS drivers |
| Break-Before-Make Delay | 5–20ns (typ. 10ns) - prevents signal shorting during channel switching in audio crosspoint matrices |
Pinout & Package
MAX4553ESE+ is housed in a 16-pin narrow SO (Small Outline) package (SOIC-N), 3.9mm width, 1.75mm height, with standard 1.27mm pitch. Pin 12 is No Connect (N.C.).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1–IN4 (Pins 1, 16, 9, 8) | Digital control inputs | Accept TTL/CMOS logic; IN1/IN4 control NO1/NO4; IN2/IN3 control NC2/NC3 |
| COM1–COM4 (Pins 2, 15, 10, 7) | Analog common terminals | Signal path midpoint; bidirectional - may serve as input or output per channel |
| NO1, NO4 (Pins 11, 6) | Normally open analog terminals | Connect to COMx only when corresponding INx = logic high (active-high control) |
| NC2, NC3 (Pins 3, 14) | Normally closed analog terminals | Connected to COMx when corresponding INx = logic low; open when INx = high |
| V+ (Pin 13) | Positive supply | Powers analog switches and internal logic; internally tied to substrate |
| V− (Pin 4) | Negative supply | Required for dual-supply operation; connect to GND for single-supply mode |
| GND (Pin 5) | Digital ground reference | Return for logic circuitry and ESD SCR cathodes; not analog signal reference |
Key Features
| Feature | Design Value |
|---|---|
| ±15kV ESD protection on NC/NO pins | Enables direct connection to exposed connectors in avionics and portable test gear without external protection components |
| Break-before-make timing (5–20ns) | Prevents transient shorts in mixed-signal routing where NO and NC channels share common COM nodes |
| Rail-to-rail analog signal range | Supports full dynamic range of ±4.5V signals with ±5V supplies - ideal for op-amp interfacing and sensor conditioning |
| Low power consumption (<1µW) | Reduces quiescent current in always-on battery monitoring circuits and IoT edge nodes |
| Pin-compatible with DG211/DG212/DG213 | Allows drop-in replacement in legacy designs without PCB rework or layout changes |
Applications
| Audio Signal Routing | Data Acquisition Multiplexing |
|---|---|
Use Scenario: Switching line-level stereo signals between multiple sources (mic, DAC, codec) in portable audio mixers. IC Role / Device Role / Timing Role: Quad SPST switch providing isolated, low-distortion signal paths with break-before-make to prevent pop/click artifacts. Use Value: 120Ω RON and 8Ω flatness preserve frequency response up to 20kHz; ±15kV ESD protects against user-handling discharge. |
Use Scenario: Multiplexing 4-channel thermocouple or RTD inputs into a single ADC in industrial PLC analog input modules. IC Role / Device Role / Timing Role: Precision analog switch enabling sequential sampling with matched channel resistance and ultra-low off-leakage. Use Value: 10nA max off-leakage at +85°C prevents measurement drift; rail-to-rail support accommodates wide sensor voltage ranges. |
| Battery-Operated Test Equipment | Avionics Signal Conditioning |
Use Scenario: Configuring signal paths in handheld multimeters or portable oscilloscope probes for AC/DC coupling, attenuation, and range selection. IC Role / Device Role / Timing Role: Low-power, high-ESD-tolerance analog switch managing front-end signal conditioning under variable supply conditions. Use Value: Single +2.7V operation extends battery life; 1nA @ +25°C leakage ensures stable zero-offset calibration. |
Use Scenario: Routing ARINC 429 or discrete discrete status signals in flight control interface units subject to harsh ESD environments. IC Role / Device Role / Timing Role: Robust analog switch isolating sensitive digital receivers from high-energy transients on aircraft wiring harnesses. Use Value: ±15kV IEC 1000-4-2 compliance meets DO-160 Section 22 Level 4 requirements; N.C./N.O. flexibility simplifies redundancy design. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4552ESE+ | Four NO-only channels; identical pinout, specs, and ESD rating | Lacks NC functionality - unsuitable where fail-safe closed-path behavior is required | Select when all four paths must be open-circuit by default (e.g., safety interlocks) |
| ADG1412BRUZ | Quad SPST, 1.5Ω RON, but only ±8kV ESD; requires ≥±4.5V dual supply | Higher performance in low-RON precision apps, but insufficient ESD margin for field-deployable equipment | Choose only in controlled lab environments where external ESD protection is added |
Compared with MAX4552ESE+, the MAX4553ESE+ provides hybrid NO/NC topology essential for redundant signal paths; versus ADG1412BRUZ, it trades lower RON for guaranteed ±15kV system-level ESD immunity - a decisive advantage in portable and aerospace applications.
Availability
MAX4553ESE+ is available at Aetrix Electronics and suitable for battery-operated equipment, data acquisition systems, and avionics signal conditioning requiring stable component supply, long-term lifecycle support, and guaranteed −40°C to +85°C industrial temperature grade performance.
Supply support for MAX4553ESE+ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs precision analog, mixed-signal, and high-reliability ICs for industrial, automotive, and communications markets, with emphasis on integration, ruggedness, and power efficiency.
The MAX455x family was engineered specifically for ESD-hardened analog signal routing in portable and mission-critical systems - delivering rail-to-rail operation, low leakage, and break-before-make timing in a single compact package.
FAQ
What is the operating temperature range for the MAX4553ESE+?
The MAX4553ESE+ is rated for −40°C to +85°C operation (industrial grade), with all electrical specifications - including on-resistance, leakage current, and switching times - fully guaranteed across this range. This makes the MAX4553ESE+ suitable for deployment in outdoor instrumentation, vehicle-mounted test gear, and industrial control cabinets without derating.
Does the MAX4553ESE+ support single-supply operation?
Yes, the MAX4553ESE+ operates from a single +2.7V to +12V supply when V− is connected to GND. At +2.7V, it maintains rail-to-rail analog signal handling (0V to +2.7V), 500Ω max RON, and valid TTL/CMOS logic thresholds (VIN_H = 1.1V min). This enables use in ultra-low-power IoT sensor nodes and energy-harvesting systems.
How does the break-before-make function work in the MAX4553ESE+?
The MAX4553ESE+ implements break-before-make only between its paired NO and NC channels: when IN1 toggles, NO1 disconnects before NC1 connects (and vice versa for IN2/IN3). Measured at 5–20ns delay, this prevents momentary shorts in configurations like relay replacements or fault-tolerant signal routing - a feature absent in MAX4551/MAX4552 variants.
Can the MAX4553ESE+ be used with bipolar supplies exceeding ±5V?
The MAX4553ESE+ supports dual supplies from ±2V to ±6V, but the absolute maximum V+ to V− differential is 13.0V. At nominal ±6V (12V total), 10% tolerance yields 13.2V - exceeding rating. Therefore, use ±5.5V max or implement supply clamping. The MAX4553ESE+ datasheet explicitly warns against sustained >13.0V differentials to prevent permanent damage.
Is the MAX4553ESE+ pin-compatible with industry-standard alternatives?
Yes, the MAX4553ESE+ is pin-compatible with the DG211, DG212, and DG213 analog switches - sharing identical 16-pin SO footprint, pin functions, and logic polarity. This allows direct substitution in legacy designs without layout modification, while adding ±15kV ESD protection and improved RON matching not present in those older devices.
MAX4553ESE+ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Active
- Switch Circuit:
- SPST - NO/NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 120Ohm
- Channel-to-Channel Matching (ΔRon):
- 1Ohm
- Voltage - Supply, Single (V+):
- 2V ~ 12V
- Voltage - Supply, Dual (V±):
- ±2V ~ 6V
- Switch Time (Ton, Toff) (Max):
- 110ns, 90ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 3.5pF, 3pF
- Current - Leakage (IS(off)) (Max):
- 1nA
- Crosstalk:
- -90dB @ 100kHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
MAX4553ESE+ FAQ
1.How can I place an order for MAX4553ESE+ through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4553ESE+ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4553ESE+ reliable?
The price and inventory of MAX4553ESE+ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4553ESE+ is usually 5 days.
3.What payment methods are accepted for MAX4553ESE+?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4553ESE+ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4553ESE+?
MAX4553ESE+ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4553ESE+ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4553ESE+?
For technical support, including MAX4553ESE+ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4553ESE+ requirements.
6.How does Aetrix verify that MAX4553ESE+ is sourced from the original manufacturer or authorized distributors?
All MAX4553ESE+ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4553ESE+ meets industry standards.
7.What is the process for return or replacement of MAX4553ESE+?
All MAX4553ESE+ units undergo pre-shipment inspection (PSI). If there is an issue with MAX4553ESE+, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4553ESE+ part is unused and in its original packaging.
Return procedure for MAX4553ESE+:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4553ESE+ Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
