My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4560CEE
- Part No.:
- MAX4560CEE
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SSOP (0.154", 3.90mm Width)
- Datasheet:
-
MAX4560CEE.pdf
- Description:
- IC SWITCH SPDT X 3 160OHM 16QSOP
- Quantity:
- Payment:
- Shipping:
Inventory:4,965
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4560CEE from Analog Devices is a triple single-pole/double-throw (SPDT) CMOS analog switch IC, designed for bidirectional signal routing in low-voltage systems. It operates from ±2V to ±6V dual supplies or +2V to +12V single supply, delivers 160Ω on-resistance at ±5V, supports rail-to-rail analog signals, and provides ±15kV HBM ESD protection on all X/Y/Z and X_/Y_/Z_ pins - enabling robust use in portable audio routing and battery-powered instrumentation.
For engineers reviewing the MAX4560CEE datasheet, MAX4560CEE pinout, MAX4560CEE application, or MAX4560CEE equivalent, key selection criteria include guaranteed RON match (2Ω typ), sub-1nA off-leakage at +25°C, < −96dB off-isolation at 100kHz, and compatibility with TTL/CMOS logic under +5V or ±5V supply conditions.
Technical Context
The MAX4560CEE implements three independent SPDT switches using CMOS transmission-gate architecture, each featuring integrated bidirectional silicon-controlled rectifiers (SCRs) for ESD protection on signal terminals. Its digital control uses address inputs A/B/C and an active-low ENABLE pin to select one of two paths per channel (X₀/X₁, Y₀/Y₁, Z₀/Z₁).
Switch operation is rail-to-rail capable across full analog input ranges (VEE to VCC), with break-before-make timing of 4–15ns and charge injection as low as 0.5pC (at +3V). Internal logic-level translators isolate digital control from analog supplies, ensuring stable switching without supply sequencing constraints.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Switch Type | Triple SPDT - enables independent selection between two analog paths per channel (X/Y/Z) |
| On-Resistance (±5V) | 160Ω max - ensures minimal signal attenuation and voltage drop in precision analog paths |
| RON Match | 2Ω typical - maintains consistent gain and signal integrity across channels in multi-path systems |
| Off-Leakage Current | 1nA at +25°C - preserves accuracy in high-impedance sensor interfaces and sample-hold circuits |
| ESD Protection | ±15kV HBM on X/Y/Z and X_/Y_/Z_ pins - eliminates need for external TVS diodes in handheld equipment |
| Off-Isolation | < −96dB at 100kHz (50Ω) - prevents crosstalk between inactive channels in audio/video routing |
| Supply Range | ±2V to ±6V dual or +2V to +12V single - supports operation from Li-ion battery (3.0–4.2V) to industrial rails |
Pinout & Package
MAX4560CEE is housed in a 16-pin QSOP package (5.3mm × 10.2mm, 0.65mm pitch), rated for 0°C to +70°C operation. Pin functions are validated per Maxim Integrated datasheet Rev 1 (2/21) and Analog Devices' official documentation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 2, 3, 4, 5 | Z₁, Z₀, Y₁, Y₀, X₁ | SPDT normally-open/normally-closed analog inputs per channel - interchangeable signal paths with no directionality constraint |
| 6 | ENABLE | Active-low global enable - drives all switches open when high, enabling power-gating in standby mode |
| 7 | VEE | Negative analog supply - tied to GND for single-supply operation; sets lower rail for rail-to-rail signal swing |
| 8 | GND | Digital/analog reference - must be low-impedance return path for ESD SCR current during transients |
| 9, 10, 11 | C, B, A | 3-bit binary address inputs - decode to select channel state (Z₀/Z₁, Y₀/Y₁, X₀/X₁) per truth table |
| 12, 13, 14, 15 | X, Y, Z | Common analog outputs - bidirectional ports connecting to system signal buses or ADC/DAC interfaces |
| 16 | VCC | Positive analog/digital supply - powers internal logic translators and switch gates; defines upper analog rail |
Key Features
| Feature | Design Value |
|---|---|
| ±15kV HBM ESD protection | Eliminates external protection components in consumer audio docks and medical handhelds |
| 2Ω typical RON match | Enables precise channel balancing in differential signal routing and multi-sensor data acquisition |
| 1nA off-leakage at +25°C | Supports >1GΩ input impedance requirements in pH meters and piezoelectric sensor front-ends |
| Rail-to-rail analog range | Preserves full dynamic range of ±5V op-amps and 12-bit SAR ADCs without level-shifting |
| TTL/CMOS-compatible logic | Direct interface with FPGA I/O banks and microcontroller GPIOs at +5V or ±5V supply |
Applications
| Audio Signal Routing | Portable Instrumentation |
|---|---|
Use Scenario: Switching between microphone inputs, line-in sources, and headphone outputs in Bluetooth speaker docks. IC Role / Device Role / Timing Role: Triple SPDT analog switch managing bidirectional audio paths with zero DC bias dependency. Use Value: <−96dB off-isolation prevents audible crosstalk between mic and playback channels at 1kHz. | Use Scenario: Multiplexing thermocouple, RTD, and strain gauge signals into a single 24-bit delta-sigma ADC. IC Role / Device Role / Timing Role: Low-leakage analog switch enabling high-precision DC-coupled sensor selection without offset drift. Use Value: 1nA off-leakage at +25°C limits measurement error to <0.1µV in 10MΩ bridge configurations. |
| Battery-Powered Test Equipment | High-ESD Industrial Interfaces |
Use Scenario: Configuring input ranges (±10V, ±1V, 0–5V) and signal conditioning paths in handheld multimeters. IC Role / Device Role / Timing Role: Rail-to-rail SPDT switch selecting between attenuator networks and amplifier gains. Use Value: ±2V to ±6V dual-supply operation allows direct use of alkaline or Li-ion battery stacks without regulators. | Use Scenario: Protecting analog I/O lines in PLC modules exposed to field wiring ESD events. IC Role / Device Role / Timing Role: ESD-hardened analog switch isolating field sensors from sensitive controller circuitry. Use Value: ±15kV HBM rating meets IEC 61000-4-2 Level 4 immunity without external clamping diodes. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ADG1419BRUZ | Single SPDT, 1.5Ω RON, ±15V supply, 16-TSSOP | Lower on-resistance but single-channel only; requires three devices for triple function | Select when ultra-low RON and wide supply range outweigh board space constraints |
| TS5A3159DCKR | Triple SPDT, 0.75Ω RON, +1.65V to +5.5V, 16-SC70 | Smaller package and lower voltage support, but only ±6kV HBM ESD rating | Select for space-constrained battery-powered designs where ESD risk is moderate |
Compared with ADG1419BRUZ and TS5A3159DCKR, MAX4560CEE uniquely combines triple SPDT functionality, ±15kV ESD hardening, and guaranteed 2Ω RON match in a single 16-QSOP package - optimizing reliability and layout efficiency for portable test gear and industrial I/O modules.
Availability
MAX4560CEE is available at Aetrix Electronics and suitable for battery-operated equipment, audio signal routing, low-voltage data-acquisition systems, and high-ESD environments requiring stable component supply across production lifecycles.
Supply support for MAX4560CEE includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, serving industrial, automotive, communications, and healthcare markets.
The MAX4558/MAX4559/MAX4560 product line was engineered for ESD-hardened analog signal routing in portable and harsh-environment electronics - emphasizing rail-to-rail operation, sub-nA leakage, and seamless TTL/CMOS interfacing.
FAQ
What is the maximum supply voltage range supported by the MAX4560CEE?
The MAX4560CEE operates from ±2V to ±6V dual supplies or +2V to +12V single supply. Absolute maximum ratings allow VCC up to +13V and VEE down to −0.3V relative to ground. Exceeding these may cause permanent damage. The MAX4560CEE is not rated for operation beyond these limits, and design margins should account for transient overshoot.
Does the MAX4560CEE require external ESD protection components?
No, the MAX4560CEE integrates ±15kV Human Body Model ESD protection on all X/Y/Z and X_/Y_/Z_ pins via on-chip SCRs, eliminating the need for external TVS diodes in most applications. However, 100nF supply bypass capacitors are recommended to absorb residual ESD energy routed through internal supply diodes.
How does the MAX4560CEE handle power-supply sequencing?
The MAX4560CEE includes internal diodes from X/Y/Z and X_/Y_/Z_ pins to VCC and VEE, preventing damage during improper sequencing. These diodes limit current flow with series resistors, making the MAX4560CEE tolerant of VCC/VEE ramp-up order - unlike unprotected switches that may latch or fail if analog signals appear before supplies stabilize.
What is the guaranteed on-resistance matching between channels for the MAX4560CEE?
The MAX4560CEE guarantees ΔRON ≤ 6Ω over temperature (0°C to +70°C) and ≤ 8Ω over extended range (−40°C to +85°C), with a typical value of 2Ω at +25°C. This matching is measured under identical conditions (VCC = 4.5V, VEE = −4.5V, IX/IY/IZ = 1mA), ensuring predictable gain consistency in multi-channel signal paths.
Can the MAX4560CEE be used with a single +3.3V supply?
Yes, the MAX4560CEE supports single +3.3V operation with guaranteed performance: on-resistance ≤ 450Ω, logic thresholds of +0.5V (low) and +1.5V (high), and turn-on time ≤ 400ns. At this voltage, off-leakage remains ≤ 10nA at +85°C, making it suitable for low-power IoT sensor hubs and wearables.
MAX4560CEE Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Obsolete
- Switch Circuit:
- SPDT
- Multiplexer/Demultiplexer Circuit:
- 2:1
- Number of Circuits:
- 3
- On-State Resistance (Max):
- 160Ohm
- Channel-to-Channel Matching (ΔRon):
- 2Ohm
- Voltage - Supply, Single (V+):
- 2V ~ 12V
- Voltage - Supply, Dual (V±):
- ±2V ~ 6V
- Switch Time (Ton, Toff) (Max):
- 150ns, 120ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2.4pC
- Channel Capacitance (CS(off), CD(off)):
- 2pF, 4pF
- Current - Leakage (IS(off)) (Max):
- 1nA
- Crosstalk:
- -93dB @ 100kHz
- Operating Temperature:
- 0°C ~ 70°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-QSOP
MAX4560CEE FAQ
1.How can I place an order for MAX4560CEE through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4560CEE on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4560CEE reliable?
The price and inventory of MAX4560CEE are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4560CEE is usually 5 days.
3.What payment methods are accepted for MAX4560CEE?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4560CEE transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4560CEE?
MAX4560CEE orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4560CEE order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4560CEE?
For technical support, including MAX4560CEE datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4560CEE requirements.
6.How does Aetrix verify that MAX4560CEE is sourced from the original manufacturer or authorized distributors?
All MAX4560CEE products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4560CEE meets industry standards.
7.What is the process for return or replacement of MAX4560CEE?
All MAX4560CEE units undergo pre-shipment inspection (PSI). If there is an issue with MAX4560CEE, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4560CEE part is unused and in its original packaging.
Return procedure for MAX4560CEE:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4560CEE Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
