My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4583ESE+T
- Part No.:
- MAX4583ESE+T
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
MAX4583ESE+T.pdf
- Description:
- IC SWITCH SPDT X 3 80OHM 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:1,930
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4583ESE+T from Maxim Integrated is a low-voltage CMOS analog SPDT switch IC configured as three independent single-pole/double-throw switches, operating from ±2V to ±6V dual supplies or +2V to +12V single supply, with rail-to-rail analog signal handling, 80Ω on-resistance at ±5V, and 1nA off-leakage at +25°C - used in battery-powered audio routing and low-voltage data-acquisition systems.
For engineers reviewing the MAX4583ESE+T datasheet, MAX4583ESE+T pinout, MAX4583ESE+T application, or MAX4583ESE+T equivalent, key selection criteria include guaranteed on-resistance matching between channels, TTL/CMOS logic compatibility at +5V, low distortion (< 0.02% into 600Ω), high off-isolation (–74dB at 50Ω), and automotive-grade temperature range support (–40°C to +85°C).
Technical Context
The MAX4583ESE+T implements three fully independent SPDT analog switches controlled by digital address inputs A/B/C and a global ENABLE signal, supporting break-before-make switching with ≤20ns transition time. Each switch features matched on-resistance (ΔRON ≤ 10Ω) and flat on-resistance over its full analog signal range (±4.5V with ±5V supplies).
It uses BICMOS process technology with internal ESD protection diodes tied to VCC and VEE, enabling rail-to-rail operation while limiting analog leakage to 1nA at +25°C. Logic thresholds are fixed at 0.8V/2.4V for TTL/CMOS compatibility across supply voltages up to +12V.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Switch Configuration | Three independent SPDT analog switches |
| Supply Range | ±2V to ±6V dual or +2V to +12V single - supports wide battery and industrial voltage rails |
| On-Resistance (RON) | 80Ω max at ±5V - ensures minimal signal attenuation in precision analog paths |
| Off-Leakage Current | 1nA max at +25°C - preserves signal integrity in high-impedance sensor interfaces |
| On-Leakage Current | 1nA max at +25°C - avoids DC offset errors in precision measurement circuits |
| Off-Isolation | –74dB at 50Ω, 1MHz - suppresses crosstalk between inactive channels |
| Total Harmonic Distortion | < 0.02% at 600Ω, 20Hz–20kHz - maintains fidelity in audio signal routing |
Pinout & Package
MAX4583ESE+T is housed in a 16-pin narrow SO (SOIC-16) package with exposed pad (RoHS-compliant, lead-free). Pin functions are defined per Maxim's standard pin nomenclature aligned with CD4053/MAX4053 logic diagrams.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VCC | Positive supply input | Drives analog switch gates and logic circuitry; sets upper analog signal limit |
| VEE | Negative supply input | Drives analog switch gates; sets lower analog signal limit; tie to GND for single-supply use |
| GND | Digital ground reference | Reference for logic inputs only; no analog signal ground connection |
| ENABLE | Global enable control | Active-high; disables all three SPDT switches when low |
| A, B, C | Digital address inputs | Selects which pole connects to normally open (X1/Y1/Z1) or normally closed (X0/Y0/Z0) terminals |
| X, Y, Z | SPDT common terminals | Bi-directional analog I/O ports - each serves as switch output or input |
| X0, X1, Y0, Y1, Z0, Z1 | SPDT throw terminals | Fixed-function NO/NC connections per switch; not reconfigurable |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail analog signal handling | Supports full-swing signals from VEE to VCC without clipping or distortion |
| Guaranteed on-resistance match | ΔRON ≤ 10Ω between channels - critical for balanced differential signal routing |
| Low charge injection | 0.5–5pC - minimizes voltage glitches during switching in sample-hold circuits |
| TTL/CMOS logic compatibility | 0.8V/2.4V thresholds at +5V supply - eliminates need for level-shifting in microcontroller interfaces |
| Break-before-make timing | 4–20ns - prevents momentary shorting between throws during state transitions |
Applications
| Audio Signal Routing | Low-Voltage Data Acquisition |
|---|---|
Use Scenario: Switching between multiple microphone or line-level inputs in portable audio recorders. IC Role / Device Role / Timing Role: Three independent SPDT switches route analog audio paths under microcontroller control. Use Value: 80Ω RON and < 0.02% THD preserve signal fidelity; 1nA leakage prevents DC bias drift in high-Z preamp stages. | Use Scenario: Multiplexing sensor outputs (thermocouples, strain gauges) into a single ADC channel. IC Role / Device Role / Timing Role: Analog front-end switch enabling sequential sampling of up to six sensors via three SPDT paths. Use Value: Guaranteed ΔRON ≤ 10Ω ensures consistent gain across channels; rail-to-rail operation accommodates ±100mV sensor spans. |
| Battery-Powered Instrumentation | Automotive Signal Conditioning |
Use Scenario: Power-sensitive handheld test equipment requiring ultra-low standby current. IC Role / Device Role / Timing Role: Low-leakage analog switch enabling power gating of unused signal paths. Use Value: 1nA off-leakage at +25°C and µA-level supply current extend battery life; –40°C to +85°C rating covers field deployment. | Use Scenario: Routing diagnostic signals (CAN transceiver status, sensor alerts) in vehicle body control modules. IC Role / Device Role / Timing Role: Robust analog switch interfacing with 5V automotive logic and ±5V sensor buses. Use Value: ±2V to ±6V dual-supply operation matches automotive analog domains; AEC-Q100 qualified variants available (not this part, but same family). |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog SPDT switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4583EUE+ | TSSOP-16 package; identical electrical specs and pinout | Smaller footprint and better thermal performance; requires different PCB layout | Select for space-constrained designs where SOIC height is prohibitive |
| MAX4053ESE+ | Same pinout and function; higher RON (120Ω typ at ±5V); wider temp range (–40°C to +85°C) | Lower cost; slightly degraded signal integrity in precision paths | Select when budget constraints outweigh minor RON and THD trade-offs |
Compared with MAX4583ESE+T, MAX4583EUE+ offers identical functionality in a smaller TSSOP package, while MAX4053ESE+ provides a cost-optimized alternative with higher on-resistance but same temperature rating and pin compatibility.
Availability
MAX4583ESE+T is available at Aetrix Electronics and suitable for battery-operated equipment, audio signal routing, and low-voltage data-acquisition systems requiring stable component supply across extended production lifecycles.
Supply support for MAX4583ESE+T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs precision analog, mixed-signal, and power management ICs for industrial, automotive, and communications applications.
The MAX458x family targets low-voltage, low-leakage analog switching in portable and high-reliability systems - emphasizing rail-to-rail operation, guaranteed parameter matching, and robust ESD tolerance.
FAQ
What is the maximum analog signal voltage range supported by the MAX4583ESE+T?
The MAX4583ESE+T supports rail-to-rail analog signals from VEE to VCC. With ±5V supplies, this is –5V to +5V; with +12V single supply (VEE = GND), it is 0V to +12V. Absolute maximum ratings allow VCC up to +13V and VEE down to –0.3V relative to GND, but normal operation must stay within specified supply ranges to avoid damage or parametric degradation.
Does the MAX4583ESE+T require external pull-up or pull-down resistors on its digital control pins?
No, the MAX4583ESE+T does not require external pull-up or pull-down resistors on A, B, C, or ENABLE pins. Its TTL/CMOS-compatible logic thresholds (0.8V low, 2.4V high at +5V) ensure reliable switching directly from microcontroller GPIOs. Input leakage is ±1µA max, so drive capability requirements are minimal and compatible with standard digital outputs.
Can the MAX4583ESE+T be used with a single +3.3V supply?
Yes, the MAX4583ESE+T operates with a single +3.3V supply (VEE = GND). At +3.3V, typical on-resistance is ~190Ω, off-leakage remains ≤5nA at +85°C, and logic thresholds adjust to 0.5V/2.0V. Performance metrics such as THD and isolation remain valid, though switching speed slows slightly versus ±5V operation.
Is the MAX4583ESE+T pin-compatible with industry-standard analog switches like the CD4053?
Yes, the MAX4583ESE+T is pin-compatible and functionally identical to the CD4053, 74HC4053, and MAX4053. It shares the same 16-pin SOIC layout, truth table, and logic diagram per RCA CD4053 specifications. Electrical improvements include lower on-resistance, tighter matching, and enhanced leakage specs - all without requiring PCB changes.
What is the thermal performance of the MAX4583ESE+T in its SOIC package?
The MAX4583ESE+T in narrow SOIC (S16+1) has a thermal resistance θJA of 8.70°C/W, allowing 696mW continuous power dissipation at +70°C ambient. Derating is linear above +70°C. The device draws only ±1µA supply current, so self-heating is negligible in typical applications - thermal design focus should center on PCB copper area and ambient airflow rather than active cooling.
MAX4583ESE+T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Circuit:
- SPDT
- Multiplexer/Demultiplexer Circuit:
- 2:1
- Number of Circuits:
- 3
- On-State Resistance (Max):
- 80Ohm
- Channel-to-Channel Matching (ΔRon):
- 1Ohm
- Voltage - Supply, Single (V+):
- 2V ~ 12V
- Voltage - Supply, Dual (V±):
- ±2V ~ 6V
- Switch Time (Ton, Toff) (Max):
- 200ns, 100ns
- -3db Bandwidth:
- -
- Charge Injection:
- 0.5pC
- Channel Capacitance (CS(off), CD(off)):
- 4pF, 6pF
- Current - Leakage (IS(off)) (Max):
- 1nA
- Crosstalk:
- -73dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
MAX4583ESE+T FAQ
1.How can I place an order for MAX4583ESE+T through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4583ESE+T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4583ESE+T reliable?
The price and inventory of MAX4583ESE+T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4583ESE+T is usually 5 days.
3.What payment methods are accepted for MAX4583ESE+T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4583ESE+T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4583ESE+T?
MAX4583ESE+T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4583ESE+T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4583ESE+T?
For technical support, including MAX4583ESE+T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4583ESE+T requirements.
6.How does Aetrix verify that MAX4583ESE+T is sourced from the original manufacturer or authorized distributors?
All MAX4583ESE+T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4583ESE+T meets industry standards.
7.What is the process for return or replacement of MAX4583ESE+T?
All MAX4583ESE+T units undergo pre-shipment inspection (PSI). If there is an issue with MAX4583ESE+T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4583ESE+T part is unused and in its original packaging.
Return procedure for MAX4583ESE+T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4583ESE+T Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
