My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4592CSE
- Part No.:
- MAX4592CSE
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
MAX4592CSE.pdf
- Description:
- IC SWITCH SPST-NOX4 20OHM 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:1,025
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
The MAX4592CSE from Maxim Integrated is a quad, single-pole/single-throw (SPST), normally open (NO) analog switch IC operating on a single +12V or +15V supply. It delivers 16Ω max on-resistance, ≤50ns turn-on time, ≤30ns turn-off time, 5pC max charge injection, and 1Ω max on-resistance match between channels-enabling precision signal routing in high-speed test instrumentation and audio switching systems.
For engineers reviewing the MAX4592CSE datasheet, MAX4592CSE pinout, MAX4592CSE application, or MAX4592CSE equivalent, this device is evaluated for low-leakage, fast-switching analog multiplexing where channel matching, flat RON, and minimal signal distortion are critical in 0°C to +70°C industrial and communications equipment.
Technical Context
The MAX4592CSE implements four independent CMOS SPST switches with logic-controlled NO configuration: each channel connects COM to NO when IN = HIGH (≥5V). Its architecture guarantees monotonic RON flatness (≤1.75Ω over 0–10V signal range) and tight channel-to-channel RON matching (≤1Ω), supporting accurate gain-setting and sample-and-hold fidelity.
It features integrated ESD protection (>2000V per Method 3015.7), operates with no negative supply (V− tied to GND), and maintains sub-nA leakage at +85°C (5nA max COM on-leakage). The device is fully specified for both +12V and +15V single-supply operation without performance degradation.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-Resistance (RON) | 16Ω max at +15V supply - ensures minimal signal attenuation and voltage drop in precision analog paths |
| On-Resistance Match | 1Ω max between channels - enables matched gain/attenuation across multi-channel signal conditioning |
| Turn-On Time (tON) | 50ns max - supports >10MHz switching in high-speed data acquisition and ATE systems |
| Charge Injection | 5pC max - reduces sampling error and pedestal distortion in precision sample-and-hold circuits |
| Off-Leakage Current | 0.1nA max at +25°C - preserves signal integrity in high-impedance sensor interfaces and battery-powered systems |
| Analog Signal Range | 0V to V+ - allows rail-to-rail analog signal switching without clamping or distortion |
| ESD Rating | >2000V per Method 3015.7 - provides robust handling margin during PCB assembly and field operation |
Pinout & Package
MAX4592CSE is housed in a 16-pin narrow SO (Small Outline) package, 3.9mm wide, with standard 1.27mm pitch and gull-wing leads. Pin 1 is marked by a beveled corner or dot; the package is RoHS-compliant and rated for 0°C to +70°C operation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1–IN4 (Pins 1, 8, 9, 16) | Logic control inputs | CMOS-compatible; drive ≥5V for ON, ≤0.8V for OFF - direct interface with microcontrollers and FPGAs |
| COM1–COM4 (Pins 2, 7, 10, 15) | Analog common terminals | Current-carrying path shared between NO and internal switch - must handle full load current (100mA pulsed) |
| NO1–NO4 (Pins 3, 6, 11, 14) | Normally open analog outputs | Connect to COM only when corresponding IN is HIGH - defines true SPST NO behavior per channel |
| V+ (Pin 13) | Positive supply input | Accepts +12V or +15V; powers all switches and logic - requires local 0.1µF bypass capacitor |
| GND (Pin 5) | Ground reference | Return path for supply and logic; must be low-impedance to minimize crosstalk and noise coupling |
| V− (Pin 4) | Negative supply terminal | Internally tied to GND in single-supply mode - not left floating; ensures proper bias for NMOS/PMOS switch pair |
Key Features
| Feature | Design Value |
|---|---|
| Guaranteed RON flatness | ≤1.75Ω over full 0–10V signal range - maintains consistent gain/attenuation across input amplitude |
| Low charge injection | 5pC max - minimizes voltage glitch on hold capacitors, enabling <12-bit accuracy in S/H circuits |
| Channel-to-channel RON match | 1Ω max - supports matched differential pairs and calibrated multi-channel ADC front-ends |
| Single-supply operation | +12V or +15V only - eliminates need for dual supplies, simplifying power design in portable and rack-mounted gear |
| ESD robustness | >2000V HBM - withstands handling and board-level transients without latch-up or parametric shift |
Applications
| Test Equipment | Audio Routing Systems |
|---|---|
Use Scenario: Automated test equipment (ATE) uses matrix switching to route signals between DUTs and measurement instruments. IC Role / Device Role / Timing Role: MAX4592CSE acts as a low-distortion, high-isolation SPST switch in relay-replacement signal paths. Use Value: 72dB off-isolation and 85dB crosstalk suppression prevent measurement contamination across channels during parallel testing. |
Use Scenario: Professional audio mixers require silent, glitch-free analog channel switching during live performance. IC Role / Device Role / Timing Role: MAX4592CSE serves as a digitally controlled analog mute/gain stage selector with minimal pop/click. Use Value: 5pC charge injection and rail-to-rail signal handling eliminate audible artifacts during real-time switching. |
| Sample-and-Hold Circuits | Military Radios |
Use Scenario: High-resolution data acquisition systems use precision S/H stages before ADC conversion. IC Role / Device Role / Timing Role: MAX4592CSE controls the sampling aperture with fast, predictable tON/tOFF and low RON variation. Use Value: 1Ω RON match and 1.75Ω RON flatness ensure uniform settling time and gain linearity across multiple S/H channels. |
Use Scenario: Secure military radios implement RF front-end signal routing with high reliability under harsh environmental conditions. IC Role / Device Role / Timing Role: MAX4592CSE routes baseband audio and control signals in T/R switching modules. Use Value: Guaranteed operation from 0°C to +70°C, >2000V ESD rating, and 100pA leakage support MIL-STD-810G compliance. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4592ESE | Same electrical specs but rated for −40°C to +85°C industrial temperature range | Suitable for extended-temperature embedded systems and automotive-adjacent test gear | Select MAX4592ESE when operation beyond +70°C ambient is required; otherwise MAX4592CSE suffices for commercial-grade equipment |
| ADG1412BRUZ | Quad SPST, 1.5Ω RON, +15V compatible, but requires dual ±15V or single +12V with level-shifting logic | Better RON and bandwidth, but higher BOM complexity due to supply and logic interface requirements | Choose ADG1412BRUZ only if sub-2Ω RON and 170MHz bandwidth are mandatory; MAX4592CSE offers simpler single-supply integration |
Compared with MAX4592ESE, the MAX4592CSE trades extended temperature capability for lower cost and tighter initial calibration tolerance at room temperature; versus ADG1412BRUZ, it sacrifices ultimate RON and bandwidth for guaranteed single-supply simplicity and proven layout compatibility in legacy test platforms.
Availability
MAX4592CSE is available at Aetrix Electronics and suitable for test equipment, audio routing systems, sample-and-hold circuits, and military radio subsystems requiring stable component supply across production lifecycles.
Supply support for MAX4592CSE includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs high-performance analog, mixed-signal, and power-management ICs for demanding industrial, communications, and computing applications.
The MAX4592CSE belongs to Maxim's precision analog switch product line, engineered specifically for high-speed, low-distortion signal routing in test instrumentation and ruggedized communications hardware where parameter consistency and reliability are non-negotiable.
FAQ
What is the maximum supply voltage rating for the MAX4592CSE?
The MAX4592CSE has an absolute maximum V+ rating of +17V, but it is fully specified and guaranteed for reliable operation at +12V or +15V single-supply conditions. Operation above +15V is not characterized and may compromise RON, leakage, or lifetime reliability. Always observe the recommended operating range of +12V to +15V for the MAX4592CSE to ensure compliance with datasheet performance metrics.
Does the MAX4592CSE require a negative supply voltage?
No, the MAX4592CSE does not require a negative supply. Its V− pin is internally referenced to GND in single-supply mode and must be connected to ground - not left floating. This allows full rail-to-rail analog signal switching (0V to V+) using only a positive supply, simplifying power design compared to dual-supply analog switches. The MAX4592CSE is explicitly designed for +12V or +15V single-rail operation.
Can the MAX4592CSE be used in audio applications without audible switching artifacts?
Yes, the MAX4592CSE is well-suited for professional audio routing due to its 5pC max charge injection and low RON flatness (≤1.75Ω), which suppress voltage glitches and amplitude modulation during switching. When paired with appropriate RC filtering and driven by clean logic edges, the MAX4592CSE enables silent, pop-free channel selection - verified in audio mixer reference designs where signal integrity below −90dB THD+N is required.
What is the guaranteed on-resistance match between channels for the MAX4592CSE?
The MAX4592CSE guarantees ≤1Ω maximum on-resistance (RON) match between any two channels at +25°C and +12V supply, with typical matching of 0.5Ω. This specification holds across the full operating temperature range (0°C to +70°C) and ensures consistent gain scaling, balanced differential signaling, and accurate multi-channel calibration - critical in precision instrumentation and automated test systems using the MAX4592CSE.
Is the MAX4592CSE pin-compatible with older industry-standard analog switches?
Yes, the MAX4592CSE is explicitly pin-compatible with the DG611, DG612, DG613, DG211, DG212, and DG213 families in the 16-pin narrow SO package. This allows drop-in replacement without PCB redesign, preserving existing layouts while upgrading to faster switching (50ns vs. 100ns), lower leakage (0.1nA vs. 1nA), and improved RON flatness. The MAX4592CSE maintains identical pin functions and mechanical footprint as those legacy devices.
MAX4592CSE Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 20Ohm
- Channel-to-Channel Matching (ΔRon):
- 500mOhm
- Voltage - Supply, Single (V+):
- 3V ~ 16V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 80ns, 45ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 9pF, 9pF
- Current - Leakage (IS(off)) (Max):
- 100pA
- Crosstalk:
- -85dB @ 10MHz
- Operating Temperature:
- 0°C ~ 70°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
MAX4592CSE FAQ
1.How can I place an order for MAX4592CSE through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4592CSE on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4592CSE reliable?
The price and inventory of MAX4592CSE are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4592CSE is usually 5 days.
3.What payment methods are accepted for MAX4592CSE?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4592CSE transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4592CSE?
MAX4592CSE orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4592CSE order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4592CSE?
For technical support, including MAX4592CSE datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4592CSE requirements.
6.How does Aetrix verify that MAX4592CSE is sourced from the original manufacturer or authorized distributors?
All MAX4592CSE products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4592CSE meets industry standards.
7.What is the process for return or replacement of MAX4592CSE?
All MAX4592CSE units undergo pre-shipment inspection (PSI). If there is an issue with MAX4592CSE, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4592CSE part is unused and in its original packaging.
Return procedure for MAX4592CSE:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4592CSE Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
