My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4592CSE+T
- Part No.:
- MAX4592CSE+T
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
MAX4592CSE+T.pdf
- Description:
- IC SWITCH SPST-NOX4 20OHM 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:1,588
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
The MAX4592CSE+T from Maxim Integrated is a high-speed, quad single-pole/single-throw (SPST) analog switch with normally open (NO) configuration, designed for +12V or +15V single-supply operation. It delivers 16Ω max on-resistance, 50ns turn-on time, 30ns turn-off time, 5pC max charge injection, and 1Ω max on-resistance match between channels - enabling precision signal routing in test equipment and communications systems.
For engineers reviewing the MAX4592CSE+T datasheet, MAX4592CSE+T pinout, MAX4592CSE+T application, or MAX4592CSE+T equivalent, key selection criteria include guaranteed RON flatness (≤1.75Ω), low leakage (≤0.1nA at +25°C), ESD robustness (>2000V per Method 3015.7), and pin compatibility with DG611/DG612/DG613 and DG211/DG212/DG213 families.
Technical Context
This device implements CMOS-based SPST switching architecture with rail-to-rail analog signal handling (0V to V+), supporting full-swing operation up to +15V. Its logic inputs accept standard TTL/CMOS levels (0.8V/5V thresholds), and internal protection diodes clamp signals exceeding V+ or V−.
Guaranteed performance includes 1.75Ω max RON flatness over 0–10V signal range and 1Ω max channel-to-channel RON matching - critical for multi-channel instrumentation where gain or timing consistency across paths is required.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-Resistance (RON) | 16Ω max at +15V supply - ensures minimal signal attenuation and voltage drop in precision analog paths. |
| Turn-On Time (tON) | 50ns max - enables high-speed multiplexing in data acquisition and ATE applications. |
| Charge Injection | 5pC max - reduces sampling error in sample-and-hold circuits and ADC front-ends. |
| On-Resistance Match | 1Ω max between channels - maintains amplitude consistency across four switched paths. |
| Off-Leakage Current | 0.1nA max at +25°C - preserves signal integrity in high-impedance sensor interfaces. |
| ESD Rating | >2000V per Method 3015.7 - supports robust handling in manufacturing and field deployment. |
| Analog Signal Range | 0V to V+ - allows full-rail signal switching without clipping when V− = GND. |
Pinout & Package
MAX4592CSE+T is housed in a 16-pin narrow SO (Small Outline) package with 1.27mm lead pitch, rated for 0°C to +70°C operation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1–IN4 (Pins 1, 16, 9, 8) | Logic control inputs | Accept 0.8V/5V logic thresholds; drive corresponding NO switches ON/OFF. |
| NO1–NO4 (Pins 3, 14, 11, 6) | Normally open switch terminals | Connect to signal source only when associated INx is high; isolated otherwise. |
| COM1–COM4 (Pins 2, 15, 10, 7) | Common analog output terminals | Deliver switched signal to downstream circuitry; each pairs with one NO terminal. |
| V+ (Pin 13) | Positive supply input | Accepts +12V or +15V; powers internal switch array and logic interface. |
| GND (Pin 5) | Ground reference | Return path for supply current and logic ground; must be low-impedance. |
| V− (Pin 4) | Negative supply input | Internally tied to GND in single-supply mode; supports dual-supply operation if needed. |
Key Features
| Feature | Design Value |
|---|---|
| Quad NO SPST topology | Four independent, non-interacting analog paths - ideal for 4-channel signal routing without crosstalk-induced coupling. |
| Guaranteed RON flatness | ≤1.75Ω variation over 0–10V signal swing - preserves linearity in audio, video, and instrumentation amplifiers. |
| Low charge injection | ≤5pC - minimizes voltage glitch at COM node during switching, critical for precision sampling. |
| Pin-compatible replacement | Direct drop-in for DG611/DG612/DG613 and DG211/DG212/DG213 - simplifies legacy design upgrades. |
| High off-isolation | 72dB at 10MHz - suppresses signal bleed-through between inactive channels in RF-adjacent environments. |
Applications
| Test Equipment | Sample-and-Hold Circuits |
|---|---|
Use Scenario: Automated test systems route multiple DUT signals to shared measurement resources (e.g., DMM, scope). IC Role / Device Role / Timing Role: Quad SPST switch selects one of four analog inputs per acquisition cycle under digital control. Use Value: 50ns tON/30ns tOFF enables sub-100ns channel switching, increasing test throughput without compromising settling accuracy. |
Use Scenario: Precision ADC front-end captures transient waveforms with minimal hold-mode error. IC Role / Device Role / Timing Role: Isolates sampling capacitor from source during hold phase using low-leakage NO switches. Use Value: 0.1nA max off-leakage and 5pC max charge injection reduce droop and pedestal error in 16-bit+ systems. |
| Disk Drive Read/Write Channels | Military Radio Signal Routing |
Use Scenario: Selecting between read-head preamp outputs or write-driver paths in HDD servo control loops. IC Role / Device Role / Timing Role: High-speed analog multiplexer routes differential head signals while maintaining signal fidelity. Use Value: 16Ω RON and 72dB off-isolation prevent channel crosstalk and preserve SNR in high-density storage electronics. |
Use Scenario: Reconfiguring RF front-end signal paths (e.g., antenna diversity, band selection) in tactical radios. IC Role / Device Role / Timing Role: SPST switch isolates unused signal chains to minimize insertion loss and intermodulation distortion. Use Value: >2000V ESD rating and guaranteed −40°C to +85°C performance ensure reliability in harsh field environments. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4592ESE+ | Same electrical specs but rated for −40°C to +85°C industrial temperature range. | Suitable for extended-temperature embedded systems where ambient exceeds +70°C. | Select MAX4592ESE+ when operating outside 0°C–70°C commercial range; identical pinout and drive requirements. |
| DG612DN | Higher RON (45Ω typ), slower switching (tON = 125ns), no guaranteed RON match or flatness specs. | Acceptable for non-critical general-purpose switching where precision matching is not required. | Choose DG612DN only for cost-sensitive, non-precision applications; MAX4592CSE+T provides superior linearity and speed. |
Compared with MAX4592ESE+, the MAX4592CSE+T trades extended temperature capability for lower cost and tighter initial calibration tolerance; compared with DG612DN, it delivers significantly better RON consistency, faster switching, and guaranteed flatness - making it preferable for metrology-grade designs.
Availability
MAX4592CSE+T is available at Aetrix Electronics and suitable for test equipment, sample-and-hold circuits, and military radio signal routing requiring stable component supply across commercial temperature grades.
Supply support for MAX4592CSE+T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) is a semiconductor company specializing in high-performance analog, mixed-signal, and power management ICs for industrial, communications, and computing markets.
The MAX4592CSE+T belongs to Maxim's precision analog switch product line, engineered for applications demanding low distortion, fast settling, and guaranteed matching across multiple channels in single-supply environments.
FAQ
What is the maximum supply voltage rating for MAX4592CSE+T?
The MAX4592CSE+T supports absolute maximum ratings of −0.3V to +17V on V+, with recommended operation at +12V or +15V single supply. Exceeding +17V risks permanent damage. The device is fully specified for guaranteed performance at both +12V and +15V, delivering 16Ω max RON and 1.5Ω max RON match at +15V. Always sequence V+ before logic inputs to avoid latch-up.
Does MAX4592CSE+T support dual-supply operation?
The MAX4592CSE+T is optimized for single-supply use (V− = GND), but its absolute maximum ratings allow V− to be driven negative - enabling limited dual-supply configurations. However, full electrical specifications (e.g., RON, tON) are only guaranteed for +12V or +15V single-supply operation. For true dual-supply analog switching, refer to the MAX391 family instead of MAX4592CSE+T.
How does charge injection affect system accuracy in MAX4592CSE+T applications?
MAX4592CSE+T specifies ≤5pC max charge injection, which directly impacts voltage error in sample-and-hold or switched-capacitor circuits. For example, with a 100pF hold capacitor, 5pC injection causes a 50mV step error - making MAX4592CSE+T suitable for 12-bit systems but requiring additional correction or filtering for 16-bit precision. This parameter is measured at VCOM = 10V and CL = 1nF per the datasheet test condition.
Is MAX4592CSE+T pin-compatible with older industry-standard switches?
Yes, MAX4592CSE+T is explicitly pin-compatible with DG611/DG612/DG613 and DG211/DG212/DG213 families in the same 16-pin narrow SO package. Pin functions (INx, NOx, COMx, V+, GND, V−) align exactly, allowing direct replacement without PCB modification. However, note that MAX4592CSE+T improves on RON, speed, and matching - so layout reuse is supported, but performance uplift is immediate.
What is the leakage current behavior of MAX4592CSE+T over temperature?
MAX4592CSE+T guarantees ≤0.1nA NO/NC off-leakage and ≤0.2nA COM on-leakage at +25°C. At +85°C, leakage rises to ≤5nA (max) per the datasheet's hot-temperature testing. This increase is linear and predictable, making the device viable for industrial applications where thermal drift must be modeled - e.g., in high-impedance sensor front-ends where 5nA at 1MΩ creates only 5mV offset.
MAX4592CSE+T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 20Ohm
- Channel-to-Channel Matching (ΔRon):
- 500mOhm
- Voltage - Supply, Single (V+):
- 3V ~ 16V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 80ns, 45ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 9pF, 9pF
- Current - Leakage (IS(off)) (Max):
- 100pA
- Crosstalk:
- -85dB @ 10MHz
- Operating Temperature:
- 0°C ~ 70°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
MAX4592CSE+T FAQ
1.How can I place an order for MAX4592CSE+T through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4592CSE+T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4592CSE+T reliable?
The price and inventory of MAX4592CSE+T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4592CSE+T is usually 5 days.
3.What payment methods are accepted for MAX4592CSE+T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4592CSE+T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4592CSE+T?
MAX4592CSE+T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4592CSE+T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4592CSE+T?
For technical support, including MAX4592CSE+T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4592CSE+T requirements.
6.How does Aetrix verify that MAX4592CSE+T is sourced from the original manufacturer or authorized distributors?
All MAX4592CSE+T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4592CSE+T meets industry standards.
7.What is the process for return or replacement of MAX4592CSE+T?
All MAX4592CSE+T units undergo pre-shipment inspection (PSI). If there is an issue with MAX4592CSE+T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4592CSE+T part is unused and in its original packaging.
Return procedure for MAX4592CSE+T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4592CSE+T Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
