My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4592EUE
- Part No.:
- MAX4592EUE
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-TSSOP (0.173", 4.40mm Width)
- Datasheet:
-
MAX4592EUE.pdf
- Description:
- IC SW SPST-NOX4 20OHM 16TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:2,892
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
The MAX4592EUE from Maxim Integrated is a quad, single-pole/single-throw (SPST), normally open (NO) analog switch IC operating from a single +12V or +15V supply. It delivers 16Ω max on-resistance, ≤50ns turn-on time, ≤30ns turn-off time, 5pC max charge injection, and 1Ω max on-resistance match between channels - enabling precision signal routing in high-speed test equipment and audio/video switching systems.
For engineers reviewing the MAX4592EUE datasheet, MAX4592EUE pinout, MAX4592EUE application, or MAX4592EUE equivalent, this device is selected for low-leakage (≤0.1nA at +25°C), high off-isolation (72dB), and guaranteed RON flatness (≤1.75Ω) in single-supply industrial and military-grade analog multiplexing.
Technical Context
The MAX4592EUE implements four independent CMOS SPST switches with logic-controlled NO configuration: each channel connects COM to NO when IN = HIGH (≥5V). It uses a single positive supply (V+ = +12V or +15V), with V− tied to GND, and requires no negative rail.
All channels share identical dynamic and DC performance: guaranteed tON/tOFF specs apply across temperature (−40°C to +85°C), and RON matching (≤1Ω) and flatness (≤1.75Ω) are specified over the full analog signal range (0V to V+).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-Resistance (RON) | 16Ω max at +15V supply - ensures minimal signal attenuation and gain error in precision instrumentation paths. |
| Turn-On Time (tON) | 50ns max - supports ≥10MHz switching in high-speed data acquisition and sample-and-hold circuits. |
| Charge Injection | 5pC max - limits voltage glitch on sampled capacitors, critical for ADC front-end integrity. |
| On-Resistance Match | 1Ω max between channels - enables accurate ratiometric measurements and matched channel switching. |
| Off-Leakage Current | 0.1nA max at +25°C - preserves signal integrity in high-impedance sensor interfaces and long-hold sample circuits. |
| Off-Isolation | 72dB at 10MHz - suppresses crosstalk between active and inactive signal paths in multi-channel systems. |
| ESD Protection | >2000V per Method 3015.7 - provides robust handling margin during board assembly and field service. |
Pinout & Package
MAX4592EUE is housed in a 16-pin TSSOP package (4.4mm × 5.0mm, 0.65mm pitch), rated for −40°C to +85°C operation. Pin numbering follows standard JEDEC TSSOP layout with pin 1 marked by a dot or beveled corner.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1–IN4 (pins 1, 8, 9, 16) | Logic control inputs | CMOS-compatible; drive ≥5V for ON (COM→NO), ≤0.8V for OFF - direct interface with microcontrollers and FPGAs. |
| COM1–COM4 (pins 2, 7, 10, 15) | Analog common terminals | Current-carrying path input/output nodes; support bidirectional analog signals up to V+. |
| NO1–NO4 (pins 3, 6, 11, 14) | Normally open switch outputs | Connect to COM only when corresponding IN is HIGH; isolated otherwise - true SPST NO behavior. |
| V+ (pin 13) | Positive supply | +12V or +15V single supply; powers internal logic and switch core - no negative rail required. |
| GND (pin 5) | Ground reference | Return path for logic and analog sections; must be low-impedance to minimize noise coupling. |
| V− (pin 4) | Negative supply terminal | Internally tied to GND in single-supply mode; not used but must be connected to ground. |
| N.C. (pin 12) | No connection | Not bonded internally - leave unconnected; no routing or grounding required. |
Key Features
| Feature | Design Value |
|---|---|
| Pin compatibility with DG611/DG612/DG613 and DG211/DG212/DG213 | Enables drop-in replacement in legacy designs without PCB rework or layout change. |
| Guaranteed RON flatness ≤1.75Ω | Maintains consistent gain and linearity across full analog signal swing (0V to V+), critical for wide-dynamic-range applications. |
| 5pC max charge injection | Reduces hold-step error in sample-and-hold amplifiers and preserves accuracy in high-resolution ADC systems. |
| 1Ω max RON match between channels | Supports precise differential and ratiometric measurements where channel-to-channel tracking is essential. |
| ESD >2000V per Method 3015.7 | Eliminates need for external ESD protection components in end-equipment I/O stages. |
Applications
| Test Equipment Switching | Audio/Video Signal Routing |
|---|---|
Use Scenario: Automated test systems route multiple DUT signals through shared measurement instruments using relayless analog switching. IC Role / Device Role / Timing Role: Quad SPST NO switch providing fast, low-distortion signal path selection under microcontroller control. Use Value: 50ns switching and 72dB off-isolation prevent measurement crosstalk and enable sub-microsecond test sequencing. |
Use Scenario: Consumer AV receivers switch between HDMI, analog audio, and legacy video sources without audible pop or visual glitch. IC Role / Device Role / Timing Role: Low-charge-injection analog switch isolating unused inputs while preserving signal fidelity. Use Value: 5pC charge injection and 16Ω RON ensure clean mute/unmute transitions and minimal THD in line-level paths. |
| Sample-and-Hold Circuits | Military Radio Front-Ends |
Use Scenario: Precision data acquisition systems capture analog waveforms with minimal aperture uncertainty and hold-step error. IC Role / Device Role / Timing Role: High-speed, low-leakage switch connecting sensor output to sampling capacitor. Use Value: 0.1nA max off-leakage at +25°C and 5pC charge injection preserve hold voltage accuracy over extended intervals. |
Use Scenario: Tactical radios require rugged, temperature-stable signal routing for RF front-end calibration and antenna switching. IC Role / Device Role / Timing Role: Industrial-grade analog switch handling bias and control signals in harsh environmental conditions. Use Value: Guaranteed −40°C to +85°C operation, 1Ω RON match, and >2000V ESD withstand meet MIL-STD-810H reliability requirements. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4592ESE | Same electrical specs, but in 16-pin narrow SO package (3.9mm × 9.9mm) and rated 0°C to +70°C. | Suitable for commercial-grade systems where extended temperature range is not required. | Select MAX4592ESE for cost-sensitive, non-industrial applications with existing SO footprint. |
| ADG1412BRUZ | Quad SPST NO switch with 1.8Ω RON, +5V/+15V dual-supply support, and 12ns tON; higher speed but lower voltage rating (±15V max). | Better for low-voltage mixed-signal systems; not rated for +15V single-supply operation like MAX4592EUE. | Choose ADG1412BRUZ when faster switching and lower RON are prioritized over single +15V operation. |
Compared with MAX4592ESE, the MAX4592EUE offers wider temperature range and smaller TSSOP footprint; versus ADG1412BRUZ, it trades speed and RON for guaranteed +15V single-supply robustness and military-grade thermal stability.
Availability
MAX4592EUE is available at Aetrix Electronics and suitable for test equipment, audio/video routing, sample-and-hold circuits, and military radio front-ends requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for MAX4592EUE includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs high-performance analog, mixed-signal, and power management ICs for industrial, automotive, communications, and computing markets.
The MAX459x family targets high-speed, precision analog switching in single-supply environments - optimized for low leakage, tight RON matching, and fast transient response in test, instrumentation, and defense systems.
FAQ
What is the maximum supply voltage rating for the MAX4592EUE?
The MAX4592EUE has an absolute maximum V+ rating of +17V, but it is fully specified for reliable operation at +12V or +15V single-supply conditions. Operation beyond +15V is not characterized and may compromise RON, leakage, or timing performance. The MAX4592EUE must never be operated with V+ < V− or with reverse polarity applied.
Does the MAX4592EUE require a negative supply rail?
No, the MAX4592EUE operates from a single positive supply (V+ = +12V or +15V) with V− connected to GND. Its internal architecture eliminates the need for a negative rail, simplifying power design in systems where only one supply is available. The V− pin must be tied to ground even in single-supply mode - it is not floating.
What is the guaranteed on-resistance match between channels for the MAX4592EUE?
The MAX4592EUE guarantees ≤1Ω maximum on-resistance match (∆RON) between any two channels at +25°C with +12V or +15V supply. This specification is tested and ensured across the full operating temperature range (−40°C to +85°C) and supports precision applications such as ratiometric sensing and differential signal switching where channel tracking is critical.
Can the MAX4592EUE be used in audio line-level switching applications?
Yes, the MAX4592EUE is well-suited for audio line-level switching due to its 16Ω max RON, 5pC max charge injection, and 72dB off-isolation at 10MHz. These parameters minimize insertion loss, switching pop, and inter-channel crosstalk - key requirements for professional and consumer audio routing. Its 0.1nA max off-leakage also prevents DC offset buildup in AC-coupled paths.
Is the MAX4592EUE pin-compatible with industry-standard analog switches?
Yes, the MAX4592EUE is explicitly pin-compatible with the DG611/DG612/DG613 and DG211/DG212/DG213 families in 16-pin TSSOP, SO, and DIP packages. This allows direct substitution in legacy designs without PCB modification, provided the supply voltage and temperature requirements align - a key advantage for obsolescence mitigation and second-source strategy.
MAX4592EUE Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 20Ohm
- Channel-to-Channel Matching (ΔRon):
- 500mOhm
- Voltage - Supply, Single (V+):
- 3V ~ 16V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 80ns, 45ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 9pF, 9pF
- Current - Leakage (IS(off)) (Max):
- 100pA
- Crosstalk:
- -85dB @ 10MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-TSSOP
MAX4592EUE FAQ
1.How can I place an order for MAX4592EUE through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4592EUE on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4592EUE reliable?
The price and inventory of MAX4592EUE are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4592EUE is usually 5 days.
3.What payment methods are accepted for MAX4592EUE?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4592EUE transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4592EUE?
MAX4592EUE orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4592EUE order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4592EUE?
For technical support, including MAX4592EUE datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4592EUE requirements.
6.How does Aetrix verify that MAX4592EUE is sourced from the original manufacturer or authorized distributors?
All MAX4592EUE products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4592EUE meets industry standards.
7.What is the process for return or replacement of MAX4592EUE?
All MAX4592EUE units undergo pre-shipment inspection (PSI). If there is an issue with MAX4592EUE, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4592EUE part is unused and in its original packaging.
Return procedure for MAX4592EUE:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4592EUE Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
