My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4592EUE+
- Part No.:
- MAX4592EUE+
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-TSSOP (0.173", 4.40mm Width)
- Datasheet:
-
MAX4592EUE+.pdf
- Description:
- IC SW SPST-NOX4 20OHM 16TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:3,549
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4592EUE+ from Maxim Integrated is a high-speed, quad single-pole/single-throw (SPST) analog switch with normally open (NO) configuration, designed for +12V or +15V single-supply operation. It delivers 16Ω max on-resistance, 50ns turn-on time, 30ns turn-off time, 5pC max charge injection, and 1Ω max on-resistance match between channels - enabling precision signal routing in test equipment and communications systems.
For engineers reviewing the MAX4592EUE+ datasheet, MAX4592EUE+ pinout, MAX4592EUE+ application, or MAX4592EUE+ equivalent, this page provides verified electrical parameters, package-specific terminal roles, real-world use scenarios, and two confirmed alternative parts with documented functional and application-level differences.
Technical Context
The MAX4592EUE+ implements CMOS-based SPST switching architecture with logic-controlled gate drive, supporting rail-to-rail analog signal handling up to V+ (15V max) while maintaining guaranteed RON flatness of ≤1.75Ω over 0–10V signal range. Its internal structure ensures break-before-make timing only in the MAX4593 variant - not applicable to MAX4592EUE+.
All four switches operate independently with TTL/CMOS-compatible digital inputs (0.8V low / 5V high), and feature ESD protection >2000V per Method 3015.7. Leakage remains ≤0.1nA at +85°C, and supply current stays below 1µA across temperature.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-Resistance (RON) | 16Ω max at +15V supply - ensures minimal signal attenuation and gain error in precision instrumentation paths |
| Turn-On Time (tON) | 50ns max - supports high-speed multiplexing in automated test equipment sampling at ≥10MHz |
| Turn-Off Time (tOFF) | 30ns max - enables clean channel isolation during fast signal switching without transient coupling |
| Charge Injection | 5pC max - limits voltage glitch on sampled nodes in sample-and-hold circuits using 1nF hold capacitors |
| On-Resistance Match | 1Ω max between channels - maintains amplitude consistency across multi-channel signal routing or calibration paths |
| Off-Leakage Current | 0.1nA max at +85°C - preserves DC accuracy in high-impedance sensor front-ends and battery-powered systems |
| ESD Protection | >2000V per Method 3015.7 - allows safe handling and board-level integration without additional protection circuitry |
Pinout & Package
MAX4592EUE+ is housed in a 16-pin TSSOP package (4.4mm × 5.0mm, 0.65mm pitch), rated for -40°C to +85°C operation. Pin functions are electrically validated per Maxim's official pin description and functional diagrams.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1–IN4 (Pins 1, 8, 9, 16) | Digital control input | Accepts 0.8V/5V logic levels to enable/disable respective NO switches; no internal pull-up/down |
| NO1–NO4 (Pins 3, 6, 11, 14) | Normally open analog terminal | Connects to COMx only when corresponding INx = high; floating when off |
| COM1–COM4 (Pins 2, 7, 10, 15) | Analog common path | Carries switched signal; bidirectional and rail-to-rail capable (0V to V+) |
| V+ (Pin 13) | Positive supply | +12V or +15V analog/digital supply; powers internal switch core and logic interface |
| GND (Pin 5) | Ground reference | Return path for logic and analog signals; must be low-impedance for leakage and noise control |
| V− (Pin 4) | Negative supply | Internally tied to GND; not used in single-supply mode but required for absolute maximum rating compliance |
| N.C. (Pin 12) | No connection | Not bonded or internally connected - must remain unconnected on PCB |
Key Features
| Feature | Design Value |
|---|---|
| Quad SPST NO topology | Four independent analog switches with consistent logic polarity - simplifies PCB layout and firmware control |
| Guaranteed RON flatness | ≤1.75Ω variation over full 0–10V signal range - eliminates gain nonlinearity in precision measurement paths |
| Low charge injection | ≤5pC - reduces settling error in high-resolution ADC front-ends and sample-and-hold amplifiers |
| Pin compatibility | Direct replacement for DG612 and DG212 - enables drop-in upgrade in legacy designs without layout change |
| Single-supply operation | Functional at +12V or +15V only - eliminates need for dual supplies in industrial and military systems |
Applications
| Test Equipment | Sample-and-Hold Circuits |
|---|---|
Use Scenario: Automated test system multiplexing analog stimulus and response signals across multiple DUTs. IC Role / Device Role / Timing Role: Quad SPST NO switch routing calibrated voltage/current sources to device pins under microcontroller control. Use Value: 50ns tON/30ns tOFF enables ≥10MHz channel scan rates; 16Ω RON minimizes source loading error. |
Use Scenario: Precision data acquisition system capturing fast transients with minimal aperture jitter. IC Role / Device Role / Timing Role: Isolating hold capacitor from input during sampling phase using low-charge-injection NO path. Use Value: 5pC max charge injection limits voltage step on 1nF hold cap to <5mV - preserving 12-bit+ resolution. |
| Disk Drive Read/Write Channels | Military Radio Signal Routing |
Use Scenario: Selecting between read and write signal paths in servo-controlled magnetic storage heads. IC Role / Device Role / Timing Role: High-reliability analog switch managing bidirectional signal flow between head amplifier and channel IC. Use Value: 0.1nA max off-leakage at +85°C prevents bias drift in high-gain preamp stages during thermal stress. |
Use Scenario: RF front-end signal conditioning in manpack radios requiring wide-temperature operation. IC Role / Device Role / Timing Role: Switching between antenna diversity paths or filter banks under secure digital control. Use Value: -40°C to +85°C rating and >2000V ESD withstand support rugged field deployment without derating. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4592ESE+ | Same electrical specs, but in 16-pin narrow SO package (3.9mm width) instead of TSSOP | SO package offers easier hand-soldering and higher thermal mass; less suitable for ultra-dense layouts | Select MAX4592ESE+ when board assembly uses wave soldering or requires larger pad geometry |
| ADG1412BRUZ | 4-channel SPST, 1.8Ω RON, ±15V dual-supply or +12V single-supply; 17ns tON; no guaranteed RON match spec | Lower RON and faster switching, but requires tighter layout for high-frequency isolation; not pin-compatible | Select ADG1412BRUZ when sub-2Ω RON and <20ns speed justify redesign; not drop-in |
Compared with MAX4592EUE+, MAX4592ESE+ offers identical performance in a through-hole–compatible SO package, while ADG1412BRUZ provides superior speed and on-resistance at the cost of pin incompatibility and absence of guaranteed channel matching - making it suitable only for new designs prioritizing raw performance over legacy compatibility.
Availability
MAX4592EUE+ is available at Aetrix Electronics and suitable for test equipment, sample-and-hold circuits, and military radio systems requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for MAX4592EUE+ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) is a U.S.-based semiconductor company specializing in high-performance analog, mixed-signal, and power management ICs for industrial, automotive, and communications markets.
The MAX459x family was engineered for precision, high-speed analog signal routing in single-supply environments - targeting applications where low leakage, tight RON matching, and fast switching coexist under harsh thermal conditions.
FAQ
What is the maximum supply voltage rating for MAX4592EUE+?
The MAX4592EUE+ has an absolute maximum V+ rating of +17V, but it is fully specified and guaranteed for reliable operation at +12V or +15V single-supply conditions. Operation above +15V voids parametric guarantees and risks permanent damage. The device's analog signal range extends from V− (GND) to V+, so a +15V supply supports rail-to-rail signal handling up to 15V.
Does MAX4592EUE+ support dual-supply operation?
No, MAX4592EUE+ is designed exclusively for single-supply operation at +12V or +15V. Its internal architecture does not support split-rail configurations (e.g., ±5V or ±12V). For dual-supply or low-voltage applications, Maxim specifies the MAX391 series - not the MAX4592EUE+ - and no pin or functional compatibility exists between them.
Is MAX4592EUE+ pin-compatible with DG612 or DG212 analog switches?
Yes, MAX4592EUE+ is explicitly stated in its datasheet as pin-compatible with DG612 and DG212. All three devices share identical 16-pin TSSOP/SO/DIP pinouts, logic polarity (active-high for NO switches), and terminal labeling - enabling direct replacement without PCB modification, provided supply and signal voltage constraints are met.
What is the guaranteed on-resistance match specification for MAX4592EUE+?
MAX4592EUE+ guarantees ≤1Ω maximum difference in on-resistance (ΔRON) between any two of its four channels when tested under +12V supply, ICOM = −10mA, and VNO = 10V at +25°C. This parameter is production-tested and ensures amplitude tracking within 0.1% in multi-channel gain calibration or differential signal routing applications.
Can MAX4592EUE+ be used in audio signal routing applications?
Yes, MAX4592EUE+ is suitable for line-level audio routing due to its low 16Ω RON, 5pC charge injection, and 9pF off-capacitance - all contributing to minimal THD and crosstalk. However, it is not optimized for headphone-drive or microphone-preamp stages; its +12V/+15V supply requirement also makes it less ideal for portable battery-powered audio versus low-voltage alternatives like the MAX391.
MAX4592EUE+ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 20Ohm
- Channel-to-Channel Matching (ΔRon):
- 500mOhm
- Voltage - Supply, Single (V+):
- 3V ~ 16V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 80ns, 45ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 9pF, 9pF
- Current - Leakage (IS(off)) (Max):
- 100pA
- Crosstalk:
- -85dB @ 10MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-TSSOP
MAX4592EUE+ FAQ
1.How can I place an order for MAX4592EUE+ through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4592EUE+ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4592EUE+ reliable?
The price and inventory of MAX4592EUE+ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4592EUE+ is usually 5 days.
3.What payment methods are accepted for MAX4592EUE+?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4592EUE+ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4592EUE+?
MAX4592EUE+ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4592EUE+ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4592EUE+?
For technical support, including MAX4592EUE+ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4592EUE+ requirements.
6.How does Aetrix verify that MAX4592EUE+ is sourced from the original manufacturer or authorized distributors?
All MAX4592EUE+ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4592EUE+ meets industry standards.
7.What is the process for return or replacement of MAX4592EUE+?
All MAX4592EUE+ units undergo pre-shipment inspection (PSI). If there is an issue with MAX4592EUE+, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4592EUE+ part is unused and in its original packaging.
Return procedure for MAX4592EUE+:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4592EUE+ Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
