My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4612EUD
- Part No.:
- MAX4612EUD
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 14-TSSOP (0.173", 4.40mm Width)
- Datasheet:
-
MAX4612EUD.pdf
- Description:
- IC SW SPST-NO/NC 100OHM 14TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:4,374
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4612EUD from Maxim Integrated is a quad, low-voltage, SPST CMOS analog switch with two normally open (NO) and two normally closed (NC) channels, 100Ω max on-resistance at +5V, 4Ω max channel-to-channel on-resistance match, and rail-to-rail analog signal handling from GND to V+; used in battery-powered audio routing and low-voltage data-acquisition systems.
For engineers reviewing the MAX4612EUD datasheet, MAX4612EUD pinout, MAX4612EUD application, or MAX4612EUD equivalent, key selection criteria include its dual NO/NC configuration, guaranteed flat on-resistance over signal range, sub-2nA off-leakage at +85°C, TTL/CMOS logic compatibility at +5V, and TSSOP-14 packaging for space-constrained portable designs.
Technical Context
The MAX4612EUD integrates four independent SPST switches-two NO and two NC-each controlled by dedicated digital inputs (IN1–IN4), enabling simultaneous or selective signal path configuration without cross-talk coupling. Its CMOS architecture ensures rail-to-rail analog conduction (GND to V+) and supports single-supply operation from +2V to +12V.
On-resistance flatness is guaranteed ≤18Ω over the full signal range, and channel matching (ΔRON) is specified ≤4Ω at +5V, critical for precision multiplexing and sample-and-hold accuracy. Logic thresholds (VIN_H = 2.4V, VIN_L = 0.8V at +5V) ensure robust interfacing with standard TTL/CMOS microcontrollers.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-Resistance (RON) | 100Ω max at +5V supply - ensures minimal signal attenuation in low-level analog paths |
| On-Resistance Match (ΔRON) | 4Ω max between channels - enables matched gain/attenuation across parallel signal paths |
| On-Resistance Flatness | 18Ω max over signal range - maintains consistent insertion loss across full analog input swing |
| Off-Leakage Current | 2nA max at TA = +85°C - preserves signal integrity in high-impedance sample-and-hold nodes |
| Analog Signal Range | GND to V+ - supports true rail-to-rail signal switching without clipping or distortion |
| Logic Compatibility | TTL/CMOS at +5V (VIN_H = 2.4V, VIN_L = 0.8V) - eliminates level-shifting in mixed-signal MCU interfaces |
| ESD Protection | >2kV per Method 3015.7 - enhances reliability in handheld and field-deployable equipment |
Pinout & Package
MAX4612EUD is housed in a RoHS-compliant 14-pin TSSOP package (U14+1), with exposed-pad variants reserved for QFN versions - this variant uses standard TSSOP without thermal pad.
| Pin | Circuit Role | Design Meaning |
|---|---|---|
| 1, 8 | NO1, NO3 | Normally open analog terminals - conduct only when corresponding INx = HIGH |
| 3, 11 | NC2, NC4 | Normally closed analog terminals - conduct only when corresponding INx = LOW |
| 2, 4, 9, 10 | COM1–COM4 | Common analog connection points - serve as shared I/O for each switch channel |
| 13, 5, 6, 12 | IN1–IN4 | Digital control inputs - TTL/CMOS-compatible logic signals enabling independent NO/NC state control |
| 7 | GND | Digital ground reference - must be tied to system ground for proper logic threshold referencing |
| 14 | V+ | Single positive supply - powers both analog and digital sections; range +2V to +12V |
Key Features
| Feature | Design Value |
|---|---|
| Dual NO/NC configuration | Two independently controllable NO and two NC switches in one IC - enables fail-safe signal routing and redundant path design |
| Rail-to-rail analog conduction | Supports signals from GND to V+ - eliminates need for external biasing in single-supply sensor or audio front-ends |
| Guaranteed on-resistance flatness | ≤18Ω variation over full signal range - ensures linear amplitude response in precision instrumentation |
| Low temperature drift leakage | <2nA off-leakage at +85°C - sustains hold accuracy in extended-temperature industrial data loggers |
| High ESD immunity | >2kV HBM - improves manufacturing yield and field reliability in unshielded portable assemblies |
Applications
| Battery-Powered Audio Routing | Low-Voltage Data Acquisition |
|---|---|
Use Scenario: Switching microphone or line-level audio signals between multiple codecs or ADCs in portable medical monitors. IC Role / Device Role / Timing Role: Quad SPST analog switch providing isolated, low-distortion signal path selection under microcontroller control. Use Value: 0.009% THD+N at 2VP-P and 300MHz bandwidth preserve audio fidelity; 100Ω RON minimizes loading on high-Z sensor outputs. |
Use Scenario: Multiplexing thermocouple, RTD, or bridge sensor outputs into a single precision ADC in handheld test equipment. IC Role / Device Role / Timing Role: Precision analog switch enabling sequential sampling of up to four sensors with matched channel characteristics. Use Value: 4Ω max RON match and <2nA off-leakage prevent gain/offset errors and charge injection-induced settling delays. |
| Sample-and-Hold Circuits | Communication Signal Switching |
Use Scenario: Capturing fast transient waveforms in oscilloscope front-ends using switched-capacitor hold circuits. IC Role / Device Role / Timing Role: Low-charge-injection (1–5pC) NO switch isolating hold capacitor during acquisition phase. Use Value: Minimal voltage step error (<1mV typical) after switching ensures accurate waveform reconstruction. |
Use Scenario: Reconfiguring RF front-end signal paths (e.g., antenna diversity, filter bank selection) in narrowband IoT modems. IC Role / Device Role / Timing Role: Low-crosstalk (−80dB) analog switch routing baseband or IF signals between transceiver chains. Use Value: −60dB off-isolation and 16pF COFF suppress inter-channel interference in multi-path receiver architectures. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar quad SPST analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4611EUD+ | Four NC-only switches (vs. MAX4612EUD's 2NO/2NC); identical RON, leakage, and timing specs | Suitable where default-closed signal paths are required for safety or power-on-state continuity | Select MAX4611EUD+ when fail-closed behavior is mandatory; not pin-compatible for NO/NC reassignment |
| ADG1412BRUZ | 4-channel, 2NO/2NC configuration; lower RON (4.7Ω typ), wider supply (±15V or +12V), higher cost | Better suited for high-precision, wide-dynamic-range instrumentation requiring sub-1Ω matching | Choose ADG1412BRUZ only if <5Ω RON and enhanced tempco performance justify premium pricing and layout change |
Compared with MAX4611EUD+, MAX4612EUD provides configurable path states essential for bidirectional signal routing; versus ADG1412BRUZ, it offers cost-effective +2V–+12V operation with sufficient precision for portable and industrial DAQ, but lacks extended voltage range and ultra-low RON.
Availability
MAX4612EUD is available at Aetrix Electronics and suitable for battery-operated equipment, low-voltage data-acquisition systems, and communication circuits requiring stable component supply across automotive and industrial temperature grades.
Supply support for MAX4612EUD includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs high-performance analog and mixed-signal ICs for precision, power, and interface applications in industrial, medical, and communications markets.
The MAX461x family targets low-voltage, low-leakage analog switching in portable and energy-sensitive systems - optimized for rail-to-rail operation, tight channel matching, and robust logic interfacing at +5V.
FAQ
What is the operating temperature range for MAX4612EUD?
The MAX4612EUD is rated for operation from −40°C to +85°C, meeting extended industrial temperature requirements. This range is confirmed in the Ordering Information table and Absolute Maximum Ratings section of the datasheet, and applies specifically to the E-grade TSSOP variant (MAX4612EUD+). The device maintains specified on-resistance, leakage, and timing performance across this full range.
Does MAX4612EUD support rail-to-rail analog signal switching?
Yes, MAX4612EUD supports rail-to-rail analog signal switching - its analog terminals (COM, NO, NC) handle voltages from GND to V+ without degradation. This is explicitly guaranteed in the Electrical Characteristics tables under "Analog Signal Range" and reinforced in the General Description. No external biasing or level-shifting is needed for signals spanning the full supply rails.
What is the maximum supply voltage for MAX4612EUD?
The absolute maximum supply voltage (V+) for MAX4612EUD is +13V, but the recommended operating range is +2V to +12V. Operation at +12V is fully characterized - on-resistance drops to 30Ω (typ), and logic thresholds shift to VIN_H = 4.0V / VIN_L = 0.8V. Exceeding +13V risks permanent damage, as stated in the Absolute Maximum Ratings table.
How does the 2NO/2NC configuration of MAX4612EUD differ from MAX4610 and MAX4611?
MAX4612EUD integrates two normally open (NO) and two normally closed (NC) switches, whereas MAX4610EUD has four NO switches and MAX4611EUD has four NC switches. This hybrid configuration allows flexible signal routing - e.g., one path active by default (NC), another enabled on demand (NO) - enabling fail-safe or power-gated topologies not possible with uniform-switch families.
Is MAX4612EUD pin-compatible with industry-standard analog switches?
MAX4612EUD is pin-compatible with the 74HC4066 and MAX4066 in its 14-pin TSSOP package, sharing identical pin assignments for V+, GND, COMx, NOx/NCx, and INx. This allows drop-in replacement in existing layouts designed for those parts, provided the 2NO/2NC functionality meets the system's signal path requirements - no PCB changes are needed.
MAX4612EUD Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NO/NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 100Ohm
- Channel-to-Channel Matching (ΔRon):
- 1Ohm
- Voltage - Supply, Single (V+):
- 2V ~ 12V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 65ns, 28ns
- -3db Bandwidth:
- 300MHz
- Charge Injection:
- 1pC
- Channel Capacitance (CS(off), CD(off)):
- 16pF, 16pF
- Current - Leakage (IS(off)) (Max):
- 100pA
- Crosstalk:
- -80dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 14-TSSOP
MAX4612EUD FAQ
1.How can I place an order for MAX4612EUD through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4612EUD on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4612EUD reliable?
The price and inventory of MAX4612EUD are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4612EUD is usually 5 days.
3.What payment methods are accepted for MAX4612EUD?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4612EUD transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4612EUD?
MAX4612EUD orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4612EUD order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4612EUD?
For technical support, including MAX4612EUD datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4612EUD requirements.
6.How does Aetrix verify that MAX4612EUD is sourced from the original manufacturer or authorized distributors?
All MAX4612EUD products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4612EUD meets industry standards.
7.What is the process for return or replacement of MAX4612EUD?
All MAX4612EUD units undergo pre-shipment inspection (PSI). If there is an issue with MAX4612EUD, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4612EUD part is unused and in its original packaging.
Return procedure for MAX4612EUD:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4612EUD Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
