My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4614EPD+
- Part No.:
- MAX4614EPD+
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 14-DIP (0.300", 7.62mm)
- Datasheet:
-
MAX4614EPD+.pdf
- Description:
- IC SWITCH SPST-NOX4 10OHM 14DIP
- Quantity:
- Payment:
- Shipping:
Inventory:200
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4614EPD+ from Analog Devices is a quad, low-voltage, high-speed, single-pole/single-throw (SPST) analog switch with four normally open (NO) channels, 10Ω max on-resistance at +5V, 12ns turn-on time, and rail-to-rail signal handling from V+ to GND - used in battery-powered audio routing and low-voltage data-acquisition front-ends.
For engineers reviewing the MAX4614EPD+ datasheet, MAX4614EPD+ pinout, MAX4614EPD+ application, or MAX4614EPD+ equivalent, key selection criteria include guaranteed 1Ω max on-resistance matching between channels, <6nA off-leakage at +85°C, TTL/CMOS logic compatibility at +5V, and operation across –40°C to +85°C industrial temperature range.
Technical Context
The MAX4614EPD+ implements CMOS transmission-gate architecture with matched P/N channel pairs per switch, enabling flat on-resistance (<1Ω variation over full signal range) and low charge injection (6.5pC). Its digital control inputs feature fixed 0.8V/2.4V thresholds independent of supply voltage, ensuring robust logic interpretation across 2V–5.5V operation.
All four NO switches share a common +2V to +5.5V single supply (V+), support bidirectional analog signals from GND to V+, and exhibit 70MHz on-channel bandwidth with –85dB off-isolation at 100kHz - optimized for precision multiplexing without signal degradation.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-resistance | 10Ω max at +5V supply - ensures minimal signal attenuation and gain error in precision signal paths |
| On-resistance match | 1Ω max between channels - enables accurate differential or ratiometric measurements |
| Turn-on time | 12ns typical - supports high-speed multiplexing in sampling systems up to ~10MHz |
| Off-leakage current | 6nA max at +85°C - preserves accuracy in high-impedance sensor interfaces and sample-and-hold hold phases |
| Analog signal range | Rail-to-rail (GND to V+) - allows full utilization of ADC input range without level-shifting |
| Logic compatibility | TTL/CMOS thresholds (0.8V/2.4V) at +5V - eliminates need for level translators when driven by microcontrollers |
| Supply voltage range | +2V to +5.5V - supports direct integration into 3.3V and 5V systems, including Li-ion battery-powered designs |
Pinout & Package
MAX4614EPD+ uses a 14-pin plastic DIP package with through-hole mounting, 0.3-inch width, and standard 0.1-inch pin pitch - compatible with legacy prototyping and industrial PCB layouts requiring mechanical robustness and thermal margin (800mW max power dissipation at +70°C).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 3, 8, 11 | NO1–NO4 | Normally open analog switch terminals - connect only when corresponding INx is HIGH; bidirectional signal path |
| 2, 4, 9, 10 | COM1–COM4 | Common analog terminals - serve as input/output junctions for each SPST switch |
| 5, 6, 12, 13 | IN1–IN4 | Digital control inputs - active-HIGH logic; drive NO switches ON when HIGH (0.8V/2.4V thresholds) |
| 7 | GND | Ground reference for analog and digital circuitry - must be low-impedance return path for leakage and switching currents |
| 14 | V+ | Positive supply - powers analog switch core and input buffers; must be applied before analog/logic signals per sequencing guidance |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail signal handling | Supports analog signals from GND to V+ without clipping - eliminates external biasing in single-supply data acquisition |
| Guaranteed on-resistance flatness | ≤1Ω variation across full signal range - maintains consistent gain and linearity in variable-amplitude applications |
| Low charge injection | 6.5pC typical - minimizes voltage glitch on sampled-hold capacitors, reducing settling time and error |
| Pin compatibility with 74HC4066/MAX4610 | Direct drop-in replacement in existing layouts - no PCB redesign needed for upgrade to lower RON and leakage |
| Industrial temperature range | –40°C to +85°C operation - qualified for use in automotive body electronics and industrial PLC I/O modules |
Applications
| Battery-Operated Audio Routing | Low-Voltage Data Acquisition |
|---|---|
Use Scenario: Multiplexing microphone inputs or headphone outputs in portable medical monitors and handheld test equipment powered by single-cell Li-ion batteries. IC Role / Device Role / Timing Role: Quad SPST analog switch routing analog audio paths under microcontroller GPIO control with minimal insertion loss and crosstalk. Use Value: 10Ω on-resistance and –96dB crosstalk preserve SNR; 12ns switching enables fast channel selection without audible artifacts. | Use Scenario: Selecting sensor outputs (thermocouples, RTDs, strain gauges) into a shared precision ADC in environmental monitoring nodes. IC Role / Device Role / Timing Role: Low-leakage analog multiplexer providing high-Z isolation between unselected channels during conversion cycles. Use Value: 6nA max off-leakage at +85°C prevents measurement drift; rail-to-rail range matches ADC input span without op-amp buffering. |
| Sample-and-Hold Circuits | Communication Signal Switching |
Use Scenario: Controlling hold capacitor charging in precision sample-and-hold amplifiers for high-resolution SAR ADC drivers. IC Role / Device Role / Timing Role: Low-charge-injection NO switch isolating the hold capacitor from input source during acquisition phase. Use Value: 6.5pC charge injection limits voltage step error to <1LSB in 16-bit systems with 1nF hold capacitors. | Use Scenario: Routing RF IF signals or baseband audio between transceiver ICs and antenna/audio codecs in compact IoT gateways. IC Role / Device Role / Timing Role: High-bandwidth analog switch enabling dynamic reconfiguration of signal paths in half-duplex communication links. Use Value: 70MHz on-channel bandwidth supports GSM/Bluetooth IF frequencies; –85dB off-isolation prevents signal coupling between transmit/receive paths. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4614EUD+ | Same electrical specs but 14-pin TSSOP package - 5mm × 4.4mm footprint, surface-mount only | Preferred for space-constrained PCBs; requires reflow assembly instead of through-hole | Select MAX4614EUD+ when board area is limited and automated SMT assembly is available |
| ADG1414BRUZ | 4-channel SPST, 1.5Ω max RON at +5V, but higher 150ns tON and –40°C to +125°C rating | Better performance in high-temp environments; slower switching limits use in >1MHz sampling | Choose ADG1414BRUZ for extended temperature operation where speed is secondary to leakage and RON stability |
Compared with MAX4614EUD+, MAX4614EPD+ offers identical analog performance with through-hole reliability and thermal margin; versus ADG1414BRUZ, it trades higher speed and lower cost for reduced temperature range and slightly higher on-resistance - making it optimal for industrial battery-powered instrumentation.
Availability
MAX4614EPD+ is available at Aetrix Electronics and suitable for battery-operated equipment, low-voltage data-acquisition systems, audio/video signal routing, sample-and-hold circuits, and communication circuits requiring stable component supply across industrial temperature grades.
Supply support for MAX4614EPD+ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, serving precision instrumentation, industrial automation, and communications markets.
The MAX4614EPD+ belongs to the MAX461x family of low-voltage, high-speed analog switches designed specifically for rail-to-rail signal routing in space- and power-constrained portable and industrial systems.
FAQ
What is the maximum supply voltage for MAX4614EPD+?
The absolute maximum supply voltage for MAX4614EPD+ is +6V, but the recommended operating range is +2V to +5.5V. Exceeding +6V risks permanent damage per Absolute Maximum Ratings. At +5.5V, on-resistance remains within spec (≤10Ω), while leakage and switching times stay within guaranteed limits across –40°C to +85°C. Always apply V+ before analog or logic signals to prevent latch-up.
Does MAX4614EPD+ support bidirectional analog signal flow?
Yes, MAX4614EPD+ supports fully bidirectional analog signal flow on all NO and COM terminals. Each SPST switch operates identically regardless of signal direction - enabling use in both input multiplexing and output demultiplexing configurations. The CMOS transmission-gate structure ensures symmetrical on-resistance and capacitance, critical for preserving signal integrity in AC-coupled paths like audio routing.
What is the logic threshold behavior of MAX4614EPD+ at 3.3V supply?
At +3.3V supply, MAX4614EPD+ retains fixed 0.8V low and 2.4V high logic thresholds - not scaled to V+. This ensures TTL/CMOS compatibility even at reduced supply voltages. Input current remains ≤0.003µA at VIN_H = 2.0V and VIN_L = 0.8V, minimizing loading on driving microcontrollers. No external level shifting is required when interfacing with 3.3V GPIOs.
How does temperature affect on-resistance in MAX4614EPD+?
On-resistance in MAX4614EPD+ increases with temperature: at +5V supply, RON is 10Ω max at +25°C and 13Ω max over –40°C to +85°C. The increase is monotonic and predictable, with typical values rising from ~8Ω at –40°C to ~11Ω at +85°C. This behavior is characterized and guaranteed - allowing designers to compensate in gain-critical applications using calibration or known worst-case margins.
Can MAX4614EPD+ be used in audio line-level switching applications?
Yes, MAX4614EPD+ is well-suited for audio line-level switching: its 10Ω on-resistance introduces negligible insertion loss (<0.1dB into 600Ω), 6.5pC charge injection prevents audible click/pop, and –96dB crosstalk isolates adjacent channels. THD+N is 0.034% at 20Hz–20kHz with 2VP-P signal at +5V supply. For headphone driving, verify peak current limits (±75mA continuous) align with load requirements.
MAX4614EPD+ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Active
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 10Ohm
- Channel-to-Channel Matching (ΔRon):
- 200mOhm
- Voltage - Supply, Single (V+):
- 2V ~ 5.5V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 12ns, 10ns
- -3db Bandwidth:
- 70MHz
- Charge Injection:
- 6.5pC
- Channel Capacitance (CS(off), CD(off)):
- 5pF, 5pF
- Current - Leakage (IS(off)) (Max):
- 1nA
- Crosstalk:
- -96dB @ 100kHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- 14-PDIP
MAX4614EPD+ FAQ
1.How can I place an order for MAX4614EPD+ through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4614EPD+ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4614EPD+ reliable?
The price and inventory of MAX4614EPD+ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4614EPD+ is usually 5 days.
3.What payment methods are accepted for MAX4614EPD+?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4614EPD+ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4614EPD+?
MAX4614EPD+ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4614EPD+ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4614EPD+?
For technical support, including MAX4614EPD+ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4614EPD+ requirements.
6.How does Aetrix verify that MAX4614EPD+ is sourced from the original manufacturer or authorized distributors?
All MAX4614EPD+ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4614EPD+ meets industry standards.
7.What is the process for return or replacement of MAX4614EPD+?
All MAX4614EPD+ units undergo pre-shipment inspection (PSI). If there is an issue with MAX4614EPD+, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4614EPD+ part is unused and in its original packaging.
Return procedure for MAX4614EPD+:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4614EPD+ Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
