My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4615ESD
- Part No.:
- MAX4615ESD
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 14-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
MAX4615ESD.pdf
- Description:
- IC SWITCH SPST-NCX4 10OHM 14SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:3,042
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4615ESD from Analog Devices is a quad, high-speed, single-pole/single-throw (SPST) CMOS analog switch with normally closed (NC) configuration, designed for low-voltage signal routing in precision analog paths. It delivers 10Ω max on-resistance at +5V, 1Ω max channel-to-channel match, and rail-to-rail signal handling from GND to V+, supporting battery-powered audio/video systems and low-voltage data acquisition.
For engineers reviewing the MAX4615ESD datasheet, MAX4615ESD pinout, MAX4615ESD application, or MAX4615ESD equivalent, key selection criteria include guaranteed on-resistance flatness (≤1Ω), sub-12ns switching times, <6nA off-leakage at +85°C, TTL/CMOS logic compatibility, and -40°C to +85°C industrial temperature operation.
Technical Context
The MAX4615ESD implements four independent NC SPST switches using matched CMOS transmission-gate architecture, enabling bidirectional analog signal flow with minimal distortion. Its logic inputs accept 0.8V/2.4V thresholds for robust TTL/CMOS interfacing across +2V to +5.5V supply operation.
Each switch supports rail-to-rail analog signals (GND to V+), exhibits ≤1Ω on-resistance variation over its full signal range, and maintains ≤1Ω matching between channels-critical for multi-channel instrumentation and sampling systems where gain/phase tracking matters.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Supply Voltage Range | +2V to +5.5V - enables direct integration into 3.3V and 5V systems without level-shifting |
| On-Resistance (max) | 10Ω at +5V - ensures minimal voltage drop and signal attenuation in precision sensor or audio paths |
| On-Resistance Match | 1Ω max between channels - preserves amplitude consistency across multiple switched signals |
| Turn-On / Turn-Off Time | 12ns / 10ns - supports high-speed multiplexing up to ~70MHz bandwidth without timing skew |
| Off-Leakage Current | 6nA at +85°C - prevents DC error accumulation in high-impedance sample-and-hold or sensor front-ends |
| Analog Signal Range | GND to V+ - allows full-scale signal routing without clipping in single-supply systems |
| Logic Thresholds | VIN_L = 0.8V, VIN_H = 2.4V - guarantees reliable switching with standard 5V TTL and CMOS drivers |
Pinout & Package
MAX4615ESD is housed in a 14-pin narrow SO (SOIC-N) package, measuring 3.9mm × 8.7mm with 1.27mm pitch, optimized for space-constrained industrial PCB layouts.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 3, 8, 11 | NC1–NC4 | Normally closed analog terminals - conduct when control input is LOW; bidirectional signal path |
| 2, 4, 9, 10 | COM1–COM4 | Common analog terminals - connect to signal source/load; shared node for each NC switch |
| 5, 6, 12, 13 | IN1–IN4 | Digital control inputs - active-low logic controls NC state; compatible with 0.8V/2.4V thresholds |
| 7 | GND | Analog/digital ground reference - must be low-impedance for leakage and THD performance |
| 14 | V+ | Positive supply - powers analog core and logic; supports 2V–5.5V operation with rail-to-rail signal swing |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-Rail® Signal Handling | Supports analog signals from GND to V+ without clamping or distortion - eliminates need for external biasing in single-supply designs |
| Guaranteed On-Resistance Flatness | ≤1Ω variation over full signal range - ensures linear gain response in variable-gain amplifiers or programmable filters |
| Low Charge Injection (6.5pC) | Minimizes voltage glitch on sampled nodes - critical for high-resolution ADC front-ends and precision hold circuits |
| High Off-Isolation (-85dB @ 100kHz) | Prevents crosstalk between inactive channels - essential for multi-signal routing in test equipment and ATE systems |
| TTL/CMOS Logic Compatibility | 0.8V/2.4V thresholds ensure interoperability with microcontrollers and FPGAs without external level shifters |
Applications
| Battery-Powered Audio Routing | Low-Voltage Data Acquisition |
|---|---|
Use Scenario: Switching microphone or line-level audio signals in portable medical monitors or handheld test instruments. IC Role / Device Role / Timing Role: Quad NC analog switch providing isolated signal path selection under microcontroller control. Use Value: 10Ω on-resistance and 0.034% THD preserve audio fidelity; 6nA leakage prevents DC offset drift in high-Z sensor interfaces. |
Use Scenario: Multiplexing thermocouple, RTD, or strain gauge outputs into a single ADC channel in industrial PLC modules. IC Role / Device Role / Timing Role: Precision analog multiplexer with matched on-resistance for consistent gain calibration across channels. Use Value: 1Ω max RON match and rail-to-rail operation enable accurate ratiometric measurements without external op-amp buffering. |
| Sample-and-Hold Circuits | Communication Signal Switching |
Use Scenario: Controlling hold capacitor charging in precision ADC front-ends for energy metering or power quality analyzers. IC Role / Device Role / Timing Role: Low-charge-injection NC switch isolating the hold capacitor during acquisition phase. Use Value: 6.5pC charge injection minimizes sampling error; fast 10ns tOFF enables tight aperture timing control. |
Use Scenario: Routing RF IF signals or baseband audio between transceiver ICs and codec in wireless IoT gateways. IC Role / Device Role / Timing Role: High-bandwidth analog switch managing signal path selection in full-duplex communication subsystems. Use Value: 70MHz on-channel bandwidth and -96dB crosstalk prevent inter-channel interference in multi-band receivers. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar quad SPST analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4615EUD | Same electrical specs but in 14-pin TSSOP (3.1mm × 5.1mm); 0.65mm pitch | Better thermal dissipation (6.3mW/°C derating vs. 8.0mW/°C) and smaller footprint | Select for higher-density layouts or improved thermal performance in compact enclosures |
| ADG1415BRUZ | Higher on-resistance (1.5Ω typ), wider supply (±15V dual or +3V to +16.5V single), 16-pin TSSOP | Supports bipolar signal ranges and higher voltage rails; not rail-to-rail at low V+ | Select when ±12V operation or lower RON at high V+ is required; not drop-in for MAX4615ESD's 14-pin SO layout |
Compared with MAX4615ESD, MAX4615EUD offers identical functionality in a smaller package with better thermal metrics, while ADG1415BRUZ trades low-voltage efficiency for broader voltage capability and lower RON at higher supplies-making it suitable for mixed-signal systems requiring extended dynamic range.
Availability
MAX4615ESD is available at Aetrix Electronics and suitable for battery-operated equipment, low-voltage data-acquisition systems, and communication circuits requiring stable component supply across industrial temperature ranges.
Supply support for MAX4615ESD includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, serving industrial, automotive, communications, and healthcare markets.
The MAX4615ESD belongs to the MAX461x family of low-voltage, high-speed analog switches engineered for precision signal routing in space- and power-constrained applications where rail-to-rail operation and low leakage are critical.
FAQ
What is the operating temperature range of the MAX4615ESD?
The MAX4615ESD is rated for continuous operation from -40°C to +85°C, making it suitable for industrial environments and outdoor electronics where ambient temperatures fluctuate widely. This extended range is confirmed by full characterization of on-resistance, leakage, and switching times across the entire span, unlike commercial-grade variants limited to 0°C to +70°C.
Does the MAX4615ESD support rail-to-rail analog signal switching?
Yes, the MAX4615ESD supports rail-to-rail analog signal switching from GND to V+, meaning it can pass signals that swing fully between the device's ground and positive supply rails without clipping or distortion. This capability is enabled by its CMOS transmission-gate design and is guaranteed across the full -40°C to +85°C temperature range.
How does the on-resistance matching specification benefit system design?
The MAX4615ESD guarantees ≤1Ω maximum difference in on-resistance between any two channels at +25°C, and ≤1.2Ω over temperature. This tight matching ensures consistent gain, phase, and settling behavior across all four switches-critical for applications like multi-channel data acquisition where channel-to-channel calibration errors must be minimized without per-channel trimming.
Can the MAX4615ESD be used with a 3.3V supply?
Yes, the MAX4615ESD operates reliably from +2V to +5.5V, including standard 3.3V systems. At +3.3V, its typical on-resistance is 20Ω (max 25Ω), and logic inputs retain TTL/CMOS compatibility with VIN_H = 2.0V and VIN_L = 0.8V thresholds-ensuring robust interface with 3.3V microcontrollers and FPGAs without external level translation.
What is the maximum off-leakage current of the MAX4615ESD at elevated temperature?
The MAX4615ESD specifies a maximum off-leakage current of 6nA at TA = +85°C for both NO/NC and COM terminals, verified across production lots. This ultra-low leakage prevents voltage error buildup in high-impedance sample-and-hold circuits, sensor interfaces, and battery-monitoring applications where even picoamp-level currents degrade accuracy over time.
MAX4615ESD Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 10Ohm
- Channel-to-Channel Matching (ΔRon):
- 200mOhm
- Voltage - Supply, Single (V+):
- 2V ~ 5.5V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 12ns, 10ns
- -3db Bandwidth:
- 70MHz
- Charge Injection:
- 6.5pC
- Channel Capacitance (CS(off), CD(off)):
- 5pF, 5pF
- Current - Leakage (IS(off)) (Max):
- 1nA
- Crosstalk:
- -96dB @ 100kHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 14-SOIC
MAX4615ESD FAQ
1.How can I place an order for MAX4615ESD through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4615ESD on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4615ESD reliable?
The price and inventory of MAX4615ESD are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4615ESD is usually 5 days.
3.What payment methods are accepted for MAX4615ESD?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4615ESD transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4615ESD?
MAX4615ESD orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4615ESD order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4615ESD?
For technical support, including MAX4615ESD datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4615ESD requirements.
6.How does Aetrix verify that MAX4615ESD is sourced from the original manufacturer or authorized distributors?
All MAX4615ESD products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4615ESD meets industry standards.
7.What is the process for return or replacement of MAX4615ESD?
All MAX4615ESD units undergo pre-shipment inspection (PSI). If there is an issue with MAX4615ESD, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4615ESD part is unused and in its original packaging.
Return procedure for MAX4615ESD:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4615ESD Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
