My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4616CPD+
- Part No.:
- MAX4616CPD+
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 14-DIP (0.300", 7.62mm)
- Datasheet:
-
MAX4616CPD+.pdf
- Description:
- IC SW SPST-NO/NCX4 10OHM 14DIP
- Quantity:
- Payment:
- Shipping:
Inventory:599
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
The MAX4616CPD+ from Analog Devices is a quad SPST CMOS analog switch with two normally open (NO) and two normally closed (NC) channels, operating from +2V to +5.5V supply. It delivers 10Ω max on-resistance at +5V, 12ns turn-on time, rail-to-rail signal handling (0V to V+), and <6nA off-leakage at +85°C - ideal for low-voltage audio routing and battery-powered data-acquisition front-ends.
For engineers reviewing the MAX4616CPD+ datasheet, MAX4616CPD+ pinout, MAX4616CPD+ application, or MAX4616CPD+ equivalent, key selection criteria include channel configuration (2NO/2NC), DIP-14 package compatibility, guaranteed on-resistance matching (≤1Ω), flatness over signal range, and TTL/CMOS logic thresholds at single-supply operation.
Technical Context
The MAX4616CPD+ implements a CMOS transmission-gate architecture with independent digital control of four SPST switches. Its dual NO/NC topology enables bidirectional signal path selection without external inversion logic, supporting both pass-through and default-closed signal paths in the same package.
It features rail-to-rail analog signal handling (0V to V+), guaranteed on-resistance flatness ≤1Ω across the full input voltage range, and matched channel RON (≤1Ω max difference), enabling precision multiplexing in sample-and-hold and instrumentation amplifier front-ends.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Supply Voltage Range | +2V to +5.5V - supports direct integration into 3.3V and 5V systems without level-shifting. |
| On-Resistance (max) | 10Ω at +5V - ensures minimal signal attenuation and gain error in precision analog paths. |
| On-Resistance Match | ≤1Ω max between channels - critical for differential signal switching and ratiometric measurements. |
| Turn-On / Turn-Off Time | 12ns / 10ns at +5V - enables high-speed multiplexing in >10MHz sampling applications. |
| Off-Leakage Current | 6nA max at +85°C - preserves accuracy in high-impedance sensor interfaces and integrator circuits. |
| Analog Signal Range | 0V to V+ - allows full-rail signal routing without clipping in single-supply systems. |
| Logic Thresholds | VIN_H = +2.4V, VIN_L = +0.8V at +5V - ensures reliable TTL/CMOS compatibility without external translators. |
Pinout & Package
MAX4616CPD+ uses a 14-pin plastic DIP (dual in-line package) with 0.3-inch body width and through-hole mounting. Pin pitch is 0.1 inch; lead finish is matte tin.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 3, 8 | NO1, NO3 | Normally open analog terminals - conduct only when corresponding INx = HIGH; bidirectional signal path. |
| 11 | NC4 | Normally closed analog terminal - conducts when IN4 = LOW; provides fail-safe signal continuity. |
| 2, 4, 9, 10 | COM1–COM4 | Common analog terminals - connect to signal source/load; bidirectional and rail-to-rail capable. |
| 5, 6, 12, 13 | IN1–IN4 | Digital control inputs - TTL/CMOS compatible; drive internal switch gates directly. |
| 7 | GND | Analog/digital ground reference - must be low-impedance return for leakage-sensitive applications. |
| 14 | V+ | Positive supply - powers analog and digital sections; decoupling capacitor required near pin. |
Key Features
| Feature | Design Value |
|---|---|
| 2NO + 2NC channel configuration | Enables mixed-signal routing - e.g., active path selection plus default-closed safety path in one IC. |
| Rail-to-rail analog signal handling | Supports full 0V–V+ signal swing without distortion or clipping in single-supply data acquisition. |
| Guaranteed on-resistance flatness ≤1Ω | Maintains consistent gain and linearity across input voltage range - essential for precision ADC drivers. |
| 1Ω max on-resistance match between channels | Minimizes channel-to-channel gain mismatch in differential or multi-path measurement systems. |
| 6nA max off-leakage at +85°C | Preserves DC accuracy in high-Z sensor nodes and long-time-constant sample-and-hold circuits. |
Applications
| Audio Signal Routing | Low-Voltage Data Acquisition |
|---|---|
|
Use Scenario: Switching between multiple microphone inputs or headphone outputs in portable audio devices. IC Role / Device Role / Timing Role: Quad SPST analog switch providing bidirectional, low-distortion signal path selection with no DC bias shift. Use Value: 0.034% THD at 20Hz–20kHz and 70MHz bandwidth ensure transparent audio fidelity; 12ns switching avoids audible click artifacts. |
Use Scenario: Multiplexing sensor outputs (e.g., thermocouples, RTDs) into a shared ADC in handheld test equipment. IC Role / Device Role / Timing Role: Precision analog switch front-end with matched RON and ultra-low leakage to preserve measurement integrity. Use Value: ≤1Ω RON match and 6nA off-leakage at +85°C minimize channel-to-channel gain/offset errors and drift in high-resolution conversions. |
| Sample-and-Hold Circuits | Battery-Operated Equipment |
|
Use Scenario: Controlling hold capacitor charging path in precision S/H amplifiers for oscilloscopes or digitizers. IC Role / Device Role / Timing Role: Low-charge-injection (6.5pC) analog switch isolating hold capacitor during acquisition phase. Use Value: 6.5pC charge injection minimizes pedestal error and settling time; rail-to-rail operation supports full-scale input capture. |
Use Scenario: Power domain isolation and signal routing in medical wearables or IoT sensors powered by coin cells. IC Role / Device Role / Timing Role: Ultra-low quiescent current (≤1µA) analog switch enabling long battery life while maintaining signal integrity. Use Value: Sub-µA supply current and +2V minimum operation extend runtime; 10Ω RON prevents excessive voltage drop at µA-level sensor currents. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4614CPD+ | Four NO-only channels; identical package, pinout, and electrical specs except NC functionality. | Suitable where all paths require active-enable behavior; lacks default-closed capability. | Select MAX4614CPD+ when system design requires uniform NO behavior across all four switches. |
| ADG1419BRUZ | Single 2:1 mux (SPDT) in TSSOP-16; 1.5Ω RON, ±15V tolerant; higher performance but different topology and footprint. | Used in higher-precision industrial DAQ; not pin-compatible and requires PCB redesign. | Choose ADG1419BRUZ only when lower on-resistance and bipolar signal support justify layout change. |
Compared with MAX4616CPD+, MAX4614CPD+ offers identical form-factor and electrical behavior but omits NC functionality, while ADG1419BRUZ delivers superior RON and voltage range at the cost of topology change and non-drop-in replacement.
Availability
MAX4616CPD+ is available at Aetrix Electronics and suitable for battery-operated equipment, audio/video signal routing, low-voltage data-acquisition systems, and sample-and-hold circuits requiring stable component supply and long-term industrial availability.
Supply support for MAX4616CPD+ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices, Inc. is a global semiconductor leader specializing in high-performance analog, mixed-signal, and digital signal processing technologies for precision measurement and signal conditioning.
The MAX4614/MAX4615/MAX4616 family was designed for low-voltage, high-speed analog signal routing in space-constrained, power-sensitive applications - emphasizing rail-to-rail operation, tight RON matching, and robust logic interface compatibility.
FAQ
What is the maximum supply voltage rating for MAX4616CPD+?
The absolute maximum supply voltage for MAX4616CPD+ is +6V. However, the recommended operating range is +2V to +5.5V. Exceeding +6V may cause permanent damage. The device is fully specified at +5V, +3.3V, and +2.5V supplies, with on-resistance increasing predictably at lower voltages - e.g., 20Ω max at +3V and 60Ω max at +2.5V.
Does MAX4616CPD+ support rail-to-rail analog signal operation?
Yes, MAX4616CPD+ supports true rail-to-rail analog signal handling: the COM, NO, and NC terminals operate from 0V to V+ (e.g., 0V to +5V). This is enabled by its CMOS transmission-gate architecture and internal level-shifting circuitry. Signals beyond this range are clamped by internal diodes, so external protection is needed if overvoltage is possible.
How does the 2NO/2NC configuration of MAX4616CPD+ differ from MAX4614CPD+?
MAX4616CPD+ integrates two normally open (NO) switches (pins 1,3,8 and 11) and two normally closed (NC) switches (pins 3,11 and internal mapping per truth table), whereas MAX4614CPD+ contains four NO-only switches. This allows MAX4616CPD+ to implement fail-safe or default-closed signal paths - for example, maintaining sensor bias continuity during MCU reset - without adding discrete components.
What is the guaranteed on-resistance match specification for MAX4616CPD+?
MAX4616CPD+ guarantees on-resistance match of ≤1Ω maximum between any two channels at +25°C, and ≤1.2Ω over the full operating temperature range (0°C to +70°C for CPD+ grade). This is measured as ΔRON = RON(max) − RON(min) under identical conditions (V+ = 4.5V, ICOM = 10mA, VNO/VNC = 3V), ensuring predictable channel tracking in differential or multi-path systems.
Is MAX4616CPD+ pin-compatible with industry-standard analog switches?
Yes, MAX4616CPD+ is pin-compatible with the 74HC4066 and MAX4610 analog switches in the 14-pin DIP package. All share identical pin assignments for V+, GND, COMx, INx, NOx/NCx terminals. This enables drop-in replacement in legacy designs - though users must verify logic polarity (NO vs NC behavior) and timing margins, as MAX4616CPD+ offers faster tON/tOFF (12ns/10ns vs ~25ns typical for 74HC4066).
MAX4616CPD+ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Active
- Switch Circuit:
- SPST - NO/NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 10Ohm
- Channel-to-Channel Matching (ΔRon):
- 200mOhm
- Voltage - Supply, Single (V+):
- 2V ~ 5.5V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 12ns, 10ns
- -3db Bandwidth:
- 70MHz
- Charge Injection:
- 6.5pC
- Channel Capacitance (CS(off), CD(off)):
- 5pF, 5pF
- Current - Leakage (IS(off)) (Max):
- 1nA
- Crosstalk:
- -96dB @ 100kHz
- Operating Temperature:
- 0°C ~ 70°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- 14-PDIP
MAX4616CPD+ FAQ
1.How can I place an order for MAX4616CPD+ through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4616CPD+ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4616CPD+ reliable?
The price and inventory of MAX4616CPD+ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4616CPD+ is usually 5 days.
3.What payment methods are accepted for MAX4616CPD+?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4616CPD+ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4616CPD+?
MAX4616CPD+ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4616CPD+ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4616CPD+?
For technical support, including MAX4616CPD+ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4616CPD+ requirements.
6.How does Aetrix verify that MAX4616CPD+ is sourced from the original manufacturer or authorized distributors?
All MAX4616CPD+ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4616CPD+ meets industry standards.
7.What is the process for return or replacement of MAX4616CPD+?
All MAX4616CPD+ units undergo pre-shipment inspection (PSI). If there is an issue with MAX4616CPD+, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4616CPD+ part is unused and in its original packaging.
Return procedure for MAX4616CPD+:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4616CPD+ Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
