My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4636EUB
- Part No.:
- MAX4636EUB
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
- Datasheet:
-
MAX4636EUB.pdf
- Description:
- IC SWITCH SPDT X 2 4OHM 10UMAX
- Quantity:
- Payment:
- Shipping:
Inventory:2,459
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4636EUB from Maxim Integrated is a dual single-pole/double-throw (SPDT) CMOS analog switch with 4Ω max on-resistance at +5V, 14ns max turn-on time, and rail-to-rail signal handling from +1.8V to +5.5V supply. It features independent channel control, break-before-make switching, and low crosstalk (−67dB at 1MHz), making it suitable for audio routing and low-voltage data-acquisition systems.
For engineers reviewing the MAX4636EUB datasheet, MAX4636EUB pinout, MAX4636EUB application, or MAX4636EUB equivalent, key selection considerations include guaranteed on-resistance flatness (1Ω max), logic-level tolerance up to +5.5V regardless of V+, and µMAX package compatibility with space-constrained PCB layouts.
Technical Context
The MAX4636EUB implements two independently controlled SPDT switches using CMOS process technology, supporting bidirectional analog signal routing across the full supply rail range. Its break-before-make architecture prevents momentary shorting between NO and NC paths during state transitions.
Logic inputs accept 0V to +5.5V signals irrespective of V+ voltage, enabling direct interfacing with 5V logic while operating from +3.3V or +2.5V supplies. On-resistance remains stable over temperature and signal voltage, with flatness specified at 1Ω max under +5V conditions.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-resistance (max) | 4Ω at +5V supply - enables low-loss signal routing in precision analog paths |
| Turn-on time (max) | 14ns - supports high-speed multiplexing in sampling and communications circuits |
| Rail-to-rail operation | Signal range spans GND to V+ - preserves full dynamic range without clipping |
| Crosstalk | −67dB at 1MHz - minimizes interference between adjacent switched channels |
| Off-isolation | −65dB at 1MHz - ensures effective channel separation when off |
| Supply voltage range | +1.8V to +5.5V - compatible with battery-powered and mixed-voltage systems |
| Logic input tolerance | 0V to +5.5V - eliminates need for level shifters when interfacing with 5V controllers |
Pinout & Package
The MAX4636EUB is housed in a 10-pin µMAX package (3.0mm × 3.0mm × 0.8mm, no exposed pad), optimized for high-density PCB layouts. Pin numbering follows standard top-view orientation with Pin 1 marked by a dot or notch.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1 | Logic control input for Switch 1 | Active-high control: drives COM1 to NO1 when high, to NC1 when low |
| NO1 | Normally open terminal of Switch 1 | Connected to COM1 only when IN1 = high; isolated otherwise |
| GND | Ground reference | Return path for supply and logic; must be low-impedance for noise control |
| NO2 | Normally open terminal of Switch 2 | Connected to COM2 only when IN2 = high; isolated otherwise |
| IN2 | Logic control input for Switch 2 | Independent active-high control for second SPDT switch |
| COM2 | Common terminal of Switch 2 | Signal I/O node shared between NO2 and NC2 paths |
| NC2 | Normally closed terminal of Switch 2 | Connected to COM2 only when IN2 = low; isolated when high |
| V+ | Positive supply input | Single supply rail powering both analog and digital sections (+1.8V to +5.5V) |
| NC1 | Normally closed terminal of Switch 1 | Connected to COM1 only when IN1 = low; isolated when high |
| COM1 | Common terminal of Switch 1 | Signal I/O node shared between NO1 and NC1 paths |
Key Features
| Feature | Design Value |
|---|---|
| Guaranteed on-resistance match | 0.2Ω max between channels - ensures balanced signal path performance in differential or dual-channel applications |
| On-resistance flatness | 1Ω max over full signal range at +5V - maintains consistent gain and linearity across input voltage swing |
| Low charge injection | 2pC typical - reduces glitch energy in sample-and-hold and precision switching applications |
| Total harmonic distortion | 0.1% - preserves audio fidelity and signal integrity in analog routing |
| Break-before-make timing | 1ns min - prevents transient short-circuits during switching transitions |
Applications
| Audio Signal Routing | Low-Voltage Data Acquisition |
|---|---|
Use Scenario: Selecting between multiple microphone or line-level inputs in portable audio codecs. IC Role / Device Role / Timing Role: Dual SPDT analog switch routing audio signals with minimal THD and crosstalk. Use Value: 0.1% THD and −67dB crosstalk preserve stereo separation and signal clarity in battery-powered devices. | Use Scenario: Multiplexing sensor outputs (e.g., thermistors, RTDs) into a single ADC channel. IC Role / Device Role / Timing Role: Low-on-resistance, rail-to-rail analog switch enabling accurate DC-coupled measurements. Use Value: 4Ω max RON and 1Ω flatness minimize gain error and offset drift across temperature and signal range. |
| Relay Replacement | Sample-and-Hold Circuits |
Use Scenario: Replacing electromechanical relays in automated test equipment where fast, silent, and wear-free switching is required. IC Role / Device Role / Timing Role: Solid-state SPDT switch providing reliable, bounce-free signal path selection. Use Value: 14ns turn-on and break-before-make architecture eliminate contact arcing and settling delays inherent in mechanical relays. | Use Scenario: Capturing and holding analog sensor voltages prior to digitization in precision measurement systems. IC Role / Device Role / Timing Role: Low-charge-injection analog switch isolating hold capacitor during acquisition phase. Use Value: 2pC typical charge injection reduces pedestal error and improves hold-step accuracy in high-resolution SAR ADC front-ends. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4635EUB | Inverted logic control (IN_ low = connect to NO_; IN_ high = connect to NC_) | Same pinout and electrical specs, but requires complementary logic drive | Select when system logic naturally aligns with inverted control or when mixing with MAX4636EUB in same design requires polarity management |
| ADG723BRMZ | Higher on-resistance (6.5Ω typ), slower switching (25ns tON), different pinout (10-lead MSOP) | Compatible function but not drop-in; requires layout revision and recalibration for RON impact | Consider only if ADI ecosystem preference or long-term availability outweighs performance trade-offs |
Compared with MAX4635EUB, the MAX4636EUB offers non-inverted logic for simplified microcontroller interface; compared with ADG723BRMZ, it delivers faster switching, lower RON, and tighter matching-critical for high-fidelity audio and precision data acquisition where signal path consistency is essential.
Availability
MAX4636EUB is available at Aetrix Electronics and suitable for audio signal routing, low-voltage data-acquisition systems, and relay replacement applications requiring stable component supply, long-term lifecycle support, and traceable sourcing.
Supply support for MAX4636EUB includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs high-performance analog and mixed-signal ICs for industrial, communications, and consumer applications.
The MAX4635/MAX4636 product line targets low-voltage, high-speed analog signal routing in space-constrained, battery-operated, and precision measurement systems.
FAQ
What is the maximum supply voltage rating for the MAX4636EUB?
The MAX4636EUB has an absolute maximum supply voltage (V+) of +6V. Operation above +5.5V is not recommended, as the device is characterized and guaranteed for reliable performance from +1.8V to +5.5V. Exceeding +6V may cause permanent damage per the Absolute Maximum Ratings table in the datasheet.
Does the MAX4636EUB support rail-to-rail analog signal operation?
Yes, the MAX4636EUB supports true rail-to-rail analog signal handling: its analog inputs (COM_, NO_, NC_) operate from GND to V+ across the full specified supply range. This allows undistorted passage of signals spanning the entire supply voltage, critical for preserving dynamic range in audio and sensor interfaces.
How does the logic polarity of MAX4636EUB differ from MAX4635EUB?
The MAX4636EUB uses non-inverted logic: IN_ = high connects COM_ to NO_, and IN_ = low connects COM_ to NC_. In contrast, the MAX4635EUB uses inverted logic (IN_ = low → NO_, IN_ = high → NC_). Both share identical pinout and electrical specs except for this control polarity difference.
Can the MAX4636EUB interface directly with 5V logic while powered from a 3.3V supply?
Yes, the MAX4636EUB logic inputs (IN1, IN2) tolerate voltages up to +5.5V regardless of V+ level. When powered from +3.3V, it accepts standard 5V TTL/CMOS logic levels without external level shifters-enabling seamless integration with legacy or mixed-voltage controller systems.
What is the guaranteed on-resistance flatness specification for MAX4636EUB at +5V?
The MAX4636EUB guarantees on-resistance flatness of 1Ω maximum over the full analog signal range (GND to V+) when operated at +5V supply. This parameter reflects the peak-to-peak variation in RON across the signal swing and ensures consistent gain and linearity in precision analog paths.
MAX4636EUB Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Obsolete
- Switch Circuit:
- SPDT
- Multiplexer/Demultiplexer Circuit:
- 2:1
- Number of Circuits:
- 2
- On-State Resistance (Max):
- 4Ohm
- Channel-to-Channel Matching (ΔRon):
- 100mOhm
- Voltage - Supply, Single (V+):
- 1.8V ~ 5.5V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 14ns, 6ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 9pF
- Current - Leakage (IS(off)) (Max):
- 100pA
- Crosstalk:
- -67dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 10-uMAX/uSOP
MAX4636EUB FAQ
1.How can I place an order for MAX4636EUB through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4636EUB on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4636EUB reliable?
The price and inventory of MAX4636EUB are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4636EUB is usually 5 days.
3.What payment methods are accepted for MAX4636EUB?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4636EUB transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4636EUB?
MAX4636EUB orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4636EUB order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4636EUB?
For technical support, including MAX4636EUB datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4636EUB requirements.
6.How does Aetrix verify that MAX4636EUB is sourced from the original manufacturer or authorized distributors?
All MAX4636EUB products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4636EUB meets industry standards.
7.What is the process for return or replacement of MAX4636EUB?
All MAX4636EUB units undergo pre-shipment inspection (PSI). If there is an issue with MAX4636EUB, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4636EUB part is unused and in its original packaging.
Return procedure for MAX4636EUB:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4636EUB Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
