My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4665CSE+
- Part No.:
- MAX4665CSE+
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
MAX4665CSE+.pdf
- Description:
- IC SWITCH SPST-NOX4 4OHM 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:3,753
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4665CSE+ from Maxim Integrated is a quad single-pole single-throw (SPST) analog switch with four normally open (NO) channels, 5Ω maximum on-resistance, ±4.5V to ±20V dual-supply or +4.5V to +36V single-supply operation, and rail-to-rail analog signal handling - used in audio-signal routing, test equipment, and PBX systems where low distortion and mechanical relay replacement are required.
For engineers reviewing the MAX4665CSE+ datasheet, MAX4665CSE+ pinout, MAX4665CSE+ application, or MAX4665CSE+ equivalent, key selection criteria include guaranteed RON match (≤0.5Ω), off-leakage current (≤5nA at +85°C), TTL/CMOS-compatible logic thresholds, and SOIC-16 package compatibility with automated PCB assembly.
Technical Context
The MAX4665CSE+ implements CMOS-based SPST switching architecture with independent channel control, supporting break-before-make timing only in the MAX4666 variant - not applicable here. Its analog path operates across full supply rails, with matched on-resistance and flat RON (≤0.5Ω variation) over ±10V signal range.
Digital inputs feature fixed +0.8V/–+2.4V logic thresholds, ensuring interoperability with TTL/CMOS logic under ±15V or +12V supplies. Supply-independent leakage performance (≤5nA off-leakage at +85°C) and charge injection ≤300pC enable precision signal routing without DC offset accumulation.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-resistance (RON) | 5Ω max - ensures minimal voltage drop and power loss in signal paths up to ±10V. |
| RON match | 0.5Ω max between channels - critical for balanced gain/attenuation in multi-channel audio or instrumentation. |
| RON flatness | 0.5Ω max over signal range - preserves linearity and THD in rail-to-rail analog signals. |
| Off-leakage current | 5nA max at +85°C - prevents signal corruption in high-impedance sensor or bias networks. |
| Supply range | +4.5V to +36V single or ±4.5V to ±20V dual - supports industrial, telecom, and avionics power architectures. |
| Logic compatibility | TTL/CMOS thresholds (+0.8V low / +2.4V high) - eliminates level-shifting in mixed-voltage systems. |
| Turn-on/off time | 130ns/90ns typical (dual supply) - suitable for multiplexing up to ~1MHz without settling errors. |
Pinout & Package
MAX4665CSE+ is housed in a 16-pin narrow SOIC (SOIC-N) package, 3.9mm width, surface-mount compatible with standard reflow profiles and IPC-7351B land patterns.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 8, 9, 16 | IN1–IN4 | Independent digital control inputs; active-high logic turns corresponding NO switch ON. |
| 2, 7, 10, 15 | COM1–COM4 | Common analog terminals - bidirectional signal path connection points. |
| 3, 6, 11, 14 | NO1–NO4 | Normally open analog outputs - conduct only when associated INx = logic high. |
| 4 | V− | Negative analog supply rail; tie to GND for single-supply operation. |
| 5 | GND | Digital ground reference for logic inputs and VL supply return. |
| 12 | VL | Logic supply input - accepts +2.7V to +7V, independent of analog supply rails. |
| 13 | V+ | Positive analog supply rail - defines upper limit of rail-to-rail signal range. |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail signal handling | Supports analog signals from V− to V+ without clipping - enables full dynamic range in audio and sensor interfaces. |
| Guaranteed RON match | ≤0.5Ω max mismatch between any two channels - essential for channel-to-channel gain consistency in ATE and mux applications. |
| Low off-leakage (5nA) | Minimizes error voltage in high-Z circuits like photodiode amplifiers or precision voltage dividers at elevated temperature. |
| TTL/CMOS-compatible inputs | Fixed +0.8V/–+2.4V thresholds eliminate need for external level shifters when interfacing with FPGA or microcontroller GPIO. |
| ESD protection >2kV | HBM-rated per Method 3015.7 - reduces risk of field failure during handling and board-level integration. |
Applications
| Audio-Signal Routing | Automatic Test Equipment (ATE) |
|---|---|
|
Use Scenario: Switching line-level stereo signals between multiple DACs, ADCs, and headphone amplifiers in professional audio mixers. IC Role / Device Role / Timing Role: Quad SPST NO switch providing isolated analog path selection with <5Ω on-resistance and <0.5Ω channel matching. Use Value: Preserves signal fidelity (THD < –100dB) and avoids crosstalk-induced imaging artifacts due to >60dB off-isolation at 1MHz. |
Use Scenario: Multiplexing DUT stimulus and response signals in semiconductor functional testers with 16-bit DAC/ADC front-ends. IC Role / Device Role / Timing Role: Low-leakage, rail-to-rail analog switch enabling accurate DC-coupled measurements across ±10V ranges. Use Value: 5nA max off-leakage at +85°C prevents measurement drift in high-impedance probe circuits; fast 90ns tOFF supports 1MHz test sequencing. |
| PBX/PABX Systems | Avionics Signal Conditioning |
|
Use Scenario: Selecting between primary and backup voice codecs, ring-detection circuits, and hybrid transceivers in telecom switching matrices. IC Role / Device Role / Timing Role: Four independent NO switches replacing electromechanical relays to route tip/ring and signaling lines. Use Value: Eliminates relay wear-out and bounce; 5Ω RON ensures minimal insertion loss (<0.1dB) in 600Ω telecom impedance environments. |
Use Scenario: Configuring analog sensor inputs (e.g., RTD, thermocouple, pressure transducer) to shared signal-conditioning chains in flight control units. IC Role / Device Role / Timing Role: High-reliability analog switch operating from ±15V supplies with guaranteed performance across –40°C to +85°C. Use Value: Qualified for extended temperature range; 0.5Ω RON flatness maintains calibration accuracy across full ±10V sensor output span. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ADG1414BRUZ | 4-channel SPST, 1.8Ω RON, ±15V supply, but requires VL = VDD; no separate logic supply pin. | Better RON and bandwidth (170MHz), but lacks independent VL rail - limits flexibility in mixed-voltage systems. | Select ADG1414BRUZ when lowest on-resistance and higher-frequency performance (>10MHz) are prioritized over logic supply independence. |
| TS5A3157DCKR | Single-channel SPDT, 0.75Ω RON, +1.65V to +5.5V supply only - no dual-supply capability or rail-to-rail analog swing. | Optimized for low-voltage portable audio; unsuitable for ±15V or +24V industrial signal routing. | Choose TS5A3157DCKR only for battery-powered, single-supply <5.5V designs requiring ultra-low RON and minimal quiescent current. |
Compared with ADG1414BRUZ and TS5A3157DCKR, the MAX4665CSE+ uniquely supports independent logic supply (VL), dual ±20V operation, and guaranteed RON match - making it the preferred choice for industrial, telecom, and avionics systems demanding robust rail-to-rail analog switching with deterministic channel matching.
Availability
MAX4665CSE+ is available at Aetrix Electronics and suitable for automatic test equipment, PBX systems, and avionics signal conditioning requiring stable component supply, long-term lifecycle support, and traceable sourcing.
Supply support for MAX4665CSE+ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs precision analog, mixed-signal, and power management ICs for industrial, communications, and computing applications.
The MAX4665CSE+ belongs to Maxim's high-performance analog switch family engineered for low-distortion, rail-to-rail signal routing in mission-critical test, telecom, and aerospace systems.
FAQ
What is the maximum allowable supply voltage for MAX4665CSE+?
The MAX4665CSE+ supports absolute maximum ratings of V+ to GND = –0.3V to +44V and V− to GND = +0.3V to –44V. For reliable operation, use within specified ranges: +4.5V to +36V single supply or ±4.5V to ±20V dual supply. Exceeding these may cause permanent damage per Absolute Maximum Ratings table.
Does MAX4665CSE+ support rail-to-rail analog signal switching?
Yes, MAX4665CSE+ supports rail-to-rail analog signal handling - signals from V− to V+ pass through the switch with minimal distortion. This is confirmed in the General Description and Electrical Characteristics sections, where input voltage range is specified as V− to V+ under all conditions.
What is the logic configuration of MAX4665CSE+?
The MAX4665CSE+ implements four normally open (NO) SPST switches. When INx = logic high (≥+2.4V), the corresponding COMx–NOx path closes; when INx = logic low (≤+0.8V), the path remains open. This is explicitly defined in the General Description and Pin Description sections.
Is MAX4665CSE+ pin-compatible with MAX4664CSE+ or MAX4666CSE+?
No, MAX4665CSE+ is not pin-compatible with MAX4664CSE+ or MAX4666CSE+. While all three share the same 16-pin SOIC package and pinout numbering, their terminal functions differ: MAX4664 uses NC pins, MAX4665 uses NO pins, and MAX4666 mixes NC/NO with break-before-make logic - requiring distinct PCB layouts.
What is the guaranteed RON flatness specification for MAX4665CSE+?
The MAX4665CSE+ guarantees RON flatness of ≤0.5Ω maximum over the specified analog signal range (±10V), meaning the variation between minimum and maximum on-resistance across the full signal swing does not exceed 0.5Ω - critical for maintaining linearity in precision analog paths.
MAX4665CSE+ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Active
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 4Ohm
- Channel-to-Channel Matching (ΔRon):
- 200mOhm
- Voltage - Supply, Single (V+):
- 4.5V ~ 36V
- Voltage - Supply, Dual (V±):
- ±4.5V ~ 20V
- Switch Time (Ton, Toff) (Max):
- 275ns, 175ns
- -3db Bandwidth:
- -
- Charge Injection:
- 300pC
- Channel Capacitance (CS(off), CD(off)):
- 34pF, 34pF
- Current - Leakage (IS(off)) (Max):
- 500pA
- Crosstalk:
- -60dB @ 1MHz
- Operating Temperature:
- 0°C ~ 70°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
MAX4665CSE+ FAQ
1.How can I place an order for MAX4665CSE+ through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4665CSE+ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4665CSE+ reliable?
The price and inventory of MAX4665CSE+ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4665CSE+ is usually 5 days.
3.What payment methods are accepted for MAX4665CSE+?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4665CSE+ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4665CSE+?
MAX4665CSE+ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4665CSE+ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4665CSE+?
For technical support, including MAX4665CSE+ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4665CSE+ requirements.
6.How does Aetrix verify that MAX4665CSE+ is sourced from the original manufacturer or authorized distributors?
All MAX4665CSE+ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4665CSE+ meets industry standards.
7.What is the process for return or replacement of MAX4665CSE+?
All MAX4665CSE+ units undergo pre-shipment inspection (PSI). If there is an issue with MAX4665CSE+, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4665CSE+ part is unused and in its original packaging.
Return procedure for MAX4665CSE+:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4665CSE+ Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
