My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX4678EUE+T
- Part No.:
- MAX4678EUE+T
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-TSSOP (0.173", 4.40mm Width)
- Datasheet:
-
MAX4678EUE+T.pdf
- Description:
- IC SW SPST-NOX4 1.6OHM 16TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:1,407
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX4678EUE+T from Analog Devices is a quad, normally open (NO), single-pole single-throw (SPST) CMOS analog switch with 1.6Ω max on-resistance (RON), 0.3Ω max RON matching between channels, and rail-to-rail signal handling capability. It operates from dual ±2.7V to ±5.5V or single +2.7V to +11V supplies, features independent logic supply (VL), and delivers -65dB off-isolation at 1MHz - ideal for precision audio routing and automated test equipment signal paths.
For engineers reviewing the MAX4678EUE+T datasheet, MAX4678EUE+T pinout, MAX4678EUE+T application, or MAX4678EUE+T equivalent, key selection criteria include verified SPST NO configuration, TSSOP-16 package compatibility, guaranteed break-before-make absence (vs. MAX4679), and confirmed 66MHz -3dB bandwidth under dual-supply operation.
Technical Context
The MAX4678EUE+T implements four independent CMOS transmission gates controlled by TTL/CMOS-compatible logic inputs (IN1–IN4), each switching between COMx and NOx terminals. Its architecture ensures matched conduction characteristics across all channels, with flat on-resistance (0.4Ω max variation) over the full ±5V analog signal range.
It supports dual-supply operation (±2.7V to ±5.5V) and single-supply mode (+2.7V to +11V), with separate VL pin enabling logic-level independence from analog rails. No internal break-before-make timing is implemented - unlike the MAX4679 - making it suitable for static signal routing where simultaneous channel control is required.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-Resistance (RON) | 1.6Ω max at +25°C, dual ±5V supply - enables low insertion loss in precision signal paths. |
| RON Matching | 0.3Ω max between channels - critical for multi-channel instrumentation requiring gain/phase consistency. |
| -3dB Bandwidth | 66MHz under dual-supply conditions - supports high-fidelity audio and fast data-acquisition sampling. |
| Off-Isolation | -65dB at 1MHz - suppresses crosstalk between inactive channels in dense routing applications. |
| Supply Range | Dual ±2.7V to ±5.5V or single +2.7V to +11V - interoperable with legacy ±5V systems and modern 3.3V/5V logic domains. |
| Logic Supply (VL) | +2.7V to V+ - decouples digital interface voltage from analog rail, simplifying mixed-signal board design. |
| Charge Injection | 85pC - limits voltage glitch on sampled-hold nodes in ADC front-ends. |
Pinout & Package
MAX4678EUE+T is housed in a 16-pin TSSOP package (JEDEC MO-153, 5mm × 4.4mm, 0.65mm pitch), rated for -40°C to +85°C operation. Thermal resistance θJA = 175°C/W; derating is 5.7mW/°C above +70°C.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 8, 9, 16 | IN1–IN4 | Independent TTL/CMOS logic inputs controlling respective switches; active-high enables NO path. |
| 2, 7, 10, 15 | COM1–COM4 | Analog common terminals - bidirectional signal ports connected to load or source. |
| 3, 6, 11, 14 | NO1–NO4 | Normally open analog terminals - only conduct when corresponding INx = logic high. |
| 4 | V− | Negative supply input; tie to GND for single-supply operation. |
| 5 | GND | Ground reference for analog and logic sections; must be low-impedance return path. |
| 12 | VL | Separate logic supply input - sets VIH/VIL thresholds independently of V+/V−. |
| 13 | V+ | Positive supply input - defines upper analog rail and powers internal bias circuitry. |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail analog signal handling | Supports signals from V− to V+ without clipping - essential for ±5V op-amp interfaces and unipolar 0–10V sensor conditioning. |
| 0.4Ω max RON flatness | Ensures consistent gain and minimal THD across full input voltage swing - critical for audio line drivers. |
| -84dB crosstalk at 1MHz | Prevents signal bleed between adjacent switched channels in multi-input multiplexers or matrix routers. |
| Low 0.1nA off-leakage at +25°C | Maintains accuracy in high-impedance sensor front-ends and precision integrator circuits. |
| TTL/CMOS logic compatibility | Accepts standard 0.8V/2.4V thresholds with <1µA input leakage - eliminates level-shifter requirements in 3.3V/5V systems. |
Applications
| Automated Test Equipment (ATE) | Professional Audio Signal Routing |
|---|---|
Use Scenario: Multiplexing calibration reference signals to multiple DUT measurement channels in semiconductor ATE racks. IC Role / Device Role / Timing Role: Quad SPST NO switch isolating reference sources from DUT inputs during sequential testing cycles. Use Value: 1.6Ω RON minimizes reference voltage drop; 0.3Ω matching ensures identical path gain across all four test channels. |
Use Scenario: Selecting between microphone preamp outputs and analog-to-digital converter inputs in digital mixing consoles. IC Role / Device Role / Timing Role: Low-distortion analog switch routing balanced line-level audio without introducing switching artifacts. Use Value: Rail-to-rail support preserves full ±2.5V audio swing; -84dB crosstalk prevents channel bleed in multi-track recording. |
| Data-Acquisition Systems | Communications Baseband Switching |
Use Scenario: Channel selection in 16-bit SAR ADC front-end multiplexers for industrial process monitoring. IC Role / Device Role / Timing Role: Precision analog switch preceding programmable gain amplifier and anti-alias filter stages. Use Value: 85pC charge injection limits hold-step error; 0.1nA off-leakage avoids DC offset drift in high-Z sensor bridges. |
Use Scenario: Reconfiguring baseband filter paths in software-defined radio (SDR) transceivers supporting multiple modulation standards. IC Role / Device Role / Timing Role: Signal path selector enabling dynamic RF chain adaptation without mechanical relays. Use Value: 66MHz bandwidth accommodates wideband LTE/5G baseband signals; dual-supply operation matches ±5V DAC/ADC rails. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ADG1414BRUZ | Quad SPST NO, 1.3Ω RON, ±15V max supply, no VL pin - requires shared logic/analog supply. | Higher voltage rating suits industrial PLC I/O modules; lacks independent logic supply for mixed-voltage designs. | Select ADG1414BRUZ when operating beyond ±5.5V or when board space allows larger TSSOP-16 footprint with different thermal profile. |
| TS5A23157DCUR | Quad SPST NO, 0.9Ω RON, single 1.65–5.5V supply only, no dual-supply support. | Optimized for portable battery-powered gear; incompatible with ±5V legacy test equipment infrastructure. | Choose TS5A23157DCUR for cost-sensitive, low-voltage consumer audio products where dual-supply capability is unnecessary. |
Compared with ADG1414BRUZ and TS5A23157DCUR, the MAX4678EUE+T uniquely balances ultra-low RON matching (0.3Ω), dual-supply flexibility, and independent VL - making it the preferred choice for re-engineering relay-based ATE fixtures into compact, reliable solid-state signal matrices.
Availability
MAX4678EUE+T is available at Aetrix Electronics and suitable for automated test equipment, professional audio routing, data-acquisition systems, communications baseband switching, and avionics signal conditioning requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for MAX4678EUE+T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, serving industrial, automotive, communications, and healthcare markets since 1965.
The MAX4677/MAX4678/MAX4679 family was designed specifically for high-fidelity, low-distortion analog signal routing in automated test and precision instrumentation - emphasizing RON matching, rail-to-rail operation, and supply flexibility.
FAQ
What is the maximum supply voltage rating for MAX4678EUE+T?
The MAX4678EUE+T supports dual supplies up to ±5.5V (V+ ≤ +5.5V, V− ≥ −5.5V) or single supply up to +11V. Absolute maximum ratings specify V+ to GND ≤ +12V and V− to GND ≥ −12V, but functional operation is guaranteed only within the specified ranges. Exceeding ±5.5V or +11V may cause permanent damage or parametric shift in the MAX4678EUE+T.
Does MAX4678EUE+T support break-before-make switching?
No, the MAX4678EUE+T does not implement break-before-make timing. It is a pure normally open (NO) switch - each channel connects COMx to NOx only when its corresponding INx is logic high, with no guaranteed dead-time between disconnect and reconnect. For guaranteed break-before-make behavior, use the MAX4679EUE+T instead.
Can MAX4678EUE+T operate with different voltages on V+ and VL pins?
Yes - the MAX4678EUE+T explicitly supports independent logic and analog supplies: VL may range from +2.7V to V+, while V+ operates from +2.7V to +11V (single supply) or ±2.7V to ±5.5V (dual supply). This allows interfacing 3.3V microcontrollers with ±5V analog signal chains without level shifters in the MAX4678EUE+T design.
What is the typical off-isolation performance of MAX4678EUE+T at 10MHz?
While the MAX4678EUE+T guarantees -65dB off-isolation at 1MHz, measured data shows degradation to approximately -42dB at 10MHz under standard test conditions (RL = 50Ω, CL = 5pF). This frequency-dependent roll-off is inherent to capacitive coupling in CMOS switch structures and must be accounted for in wideband RF or high-speed digital routing applications using the MAX4678EUE+T.
Is MAX4678EUE+T pin-compatible with MAX4677EUE+T or MAX4679EUE+T?
Yes - all three variants (MAX4677EUE+T, MAX4678EUE+T, MAX4679EUE+T) share identical 16-pin TSSOP packaging and pinout. The only functional difference lies in internal switch configuration: MAX4677 is NC, MAX4678 is NO, and MAX4679 combines two NC and two NO with break-before-make. PCB layout can be reused across the family, but firmware logic must match the selected variant's switching behavior in the MAX4678EUE+T implementation.
MAX4678EUE+T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 1.6Ohm
- Channel-to-Channel Matching (ΔRon):
- 200mOhm
- Voltage - Supply, Single (V+):
- 2.7V ~ 11V
- Voltage - Supply, Dual (V±):
- ±2.7V ~ 5.5V
- Switch Time (Ton, Toff) (Max):
- 350ns, 150ns
- -3db Bandwidth:
- 66MHz
- Charge Injection:
- 85pC
- Channel Capacitance (CS(off), CD(off)):
- 85pF, 85pF
- Current - Leakage (IS(off)) (Max):
- 1nA
- Crosstalk:
- -84dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-TSSOP
MAX4678EUE+T FAQ
1.How can I place an order for MAX4678EUE+T through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX4678EUE+T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX4678EUE+T reliable?
The price and inventory of MAX4678EUE+T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX4678EUE+T is usually 5 days.
3.What payment methods are accepted for MAX4678EUE+T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX4678EUE+T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX4678EUE+T?
MAX4678EUE+T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX4678EUE+T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX4678EUE+T?
For technical support, including MAX4678EUE+T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX4678EUE+T requirements.
6.How does Aetrix verify that MAX4678EUE+T is sourced from the original manufacturer or authorized distributors?
All MAX4678EUE+T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX4678EUE+T meets industry standards.
7.What is the process for return or replacement of MAX4678EUE+T?
All MAX4678EUE+T units undergo pre-shipment inspection (PSI). If there is an issue with MAX4678EUE+T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX4678EUE+T part is unused and in its original packaging.
Return procedure for MAX4678EUE+T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX4678EUE+T Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
