My Inquiry
My Account
Analog Devices Inc./Maxim Integrated MAX6069CAAWS+T
- Part No.:
- MAX6069CAAWS+T
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Category:
- Voltage Reference
- Package:
- 4-WFBGA, WLBGA
- Datasheet:
-
MAX6069CAAWS+T.pdf
- Description:
- IC VREF SHUNT 0.2% 4WLP
- Quantity:
- Payment:
- Shipping:
Inventory:2,779
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MAX6069CAAWS+T from Analog Devices is a precision 2.500V, 0.2% initial accuracy, ultra-low-power shunt voltage reference in a 4-bump wafer-level package (WLP), operating from 1μA to 2mA with 20ppm/°C max temperature coefficient over –40°C to +85°C - ideal for portable sensors and high-precision A/D converters.
For engineers reviewing the MAX6069CAAWS+T datasheet, MAX6069CAAWS+T pinout, MAX6069CAAWS+T application, or MAX6069CAAWS+T equivalent, this page delivers verified electrical specs, WLP terminal mapping, real-world use cases, and validated alternative options for low-current, space-constrained analog signal chains.
Technical Context
The MAX6069CAAWS+T is a two-terminal shunt bandgap reference using on-chip laser-trimmed thin-film resistors to achieve 0.2% output voltage accuracy at 2.500V. It functions as a precision voltage node by sinking current through an external bias resistor, requiring no supply rail - only a pull-up to a higher potential.
Its design targets ultra-low quiescent current operation (min 0.5μA, typ 1.0μA), low-frequency noise (60µVp-p, 0.1Hz–10Hz), and stable dynamic impedance (2Ω, 1.2μA–2mA), enabling reliable performance in battery-powered sensor front-ends and loop-powered transmitters.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Voltage | 2.500V ±0.005V (0.2% initial accuracy) - sets precise reference level for 12-bit+ ADCs without calibration. |
| Temp Coefficient | 20ppm/°C max (–40°C to +85°C) - contributes ≤±0.5mV drift across industrial temp range. |
| Min Operating Current | 0.5μA - enables operation from microamp-level bias sources, e.g., high-impedance sensor interfaces. |
| Reverse Dynamic Impedance | 2Ω (1.2μA–2mA) - ensures stable regulation under varying load/supply conditions with minimal voltage shift. |
| Low-Frequency Noise | 60µVp-p (0.1Hz–10Hz) - supports high-resolution measurements in precision metering applications. |
| Operating Temp Range | –40°C to +125°C - qualified for extended industrial environments; specified accuracy applies to –40°C to +85°C. |
Pinout & Package
Package: 0.88mm × 1.16mm, 4-bump wafer-level package (WLP), RoHS-compliant, top mark +AQ.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A1 | OUT | Main output terminal; connects to bias resistor and load; requires ≥0.01µF bypass capacitor to GND. |
| A2 | GND | Ground reference; internally shorted to B2; forms return path for shunt current. |
| B1 | OUT | Redundant output terminal; internally shorted to A1 - improves current handling and thermal symmetry. |
| B2 | GND | Redundant ground terminal; internally shorted to A2 - reduces package inductance and improves PSRR. |
Key Features
| Feature | Design Value |
|---|---|
| Laser-trimmed thin-film resistors | Enables 0.2% initial accuracy at 2.500V without external calibration components. |
| Ultra-low minimum operating current | 0.5μA allows integration into energy-harvesting and coin-cell-powered systems. |
| 4-bump WLP footprint | 0.88mm × 1.16mm area saves >70% board space vs. SOT-23 shunt references. |
| Stable reverse dynamic impedance | 2Ω over 1.2μA–2mA ensures consistent regulation across wide load current variations. |
Applications
| Portable Sensors | Precision Regulators |
|---|---|
Use Scenario: Battery-powered environmental sensor node measuring temperature/humidity with 16-bit sigma-delta ADC. IC Role / Device Role / Timing Role: Shunt voltage reference providing stable 2.500V reference for ADC VREF input and sensor excitation. Use Value: 0.2% initial accuracy and 20ppm/°C TC ensure <±1 LSB error over –40°C to +85°C without recalibration. | Use Scenario: Low-noise LDO feedback network requiring sub-1mV reference stability. IC Role / Device Role / Timing Role: Precision shunt reference replacing Zener diode in adjustable LDO feedback divider. Use Value: 60µVp-p low-frequency noise minimizes output ripple; 2Ω dynamic impedance prevents loop instability. |
| A/D Converters | 4mA–20mA Loop-Powered Sensors |
Use Scenario: Industrial data acquisition module digitizing 4–20mA current loop signals via precision resistor and 24-bit ADC. IC Role / Device Role / Timing Role: Reference source for both ADC and DAC in isolated loop transmitter calibration path. Use Value: Matched 2.500V output enables ratiometric measurement; long-term drift <150ppm/1000h maintains calibration integrity. | Use Scenario: Two-wire 4–20mA transmitter powered directly from loop current, with onboard signal conditioning. IC Role / Device Role / Timing Role: Shunt reference establishing accurate 2.500V node for op-amp biasing and DAC reference in ultra-low-power mode. Use Value: 1.0μA typical operating current allows full functionality down to 3.5mA loop current, preserving headroom for sensor electronics. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar shunt voltage reference applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX6008AESA+ | Same 2.5V output, 0.2% accuracy, but SO-8 package (3.9mm × 4.9mm); 25ppm/°C TC; min current 10μA. | Requires larger PCB area; unsuitable for ultra-miniaturized designs; higher current draw limits battery life. | Select when board space permits and legacy SO-8 layout reuse is prioritized over size/power. |
| ADR3425ARJZ-R7 | 2.5V, 0.1% accuracy, 10ppm/°C TC, SOT-23-3; min current 100μA; 65µVp-p noise. | Higher accuracy and lower TC, but 100× higher min current; incompatible WLP footprint. | Select when ultimate precision outweighs power/size constraints and SOT-23 is acceptable. |
Compared with MAX6069CAAWS+T, MAX6008AESA+ trades miniaturization and ultra-low current for package familiarity, while ADR3425ARJZ-R7 offers tighter accuracy and TC at the cost of 100× higher minimum operating current - making MAX6069CAAWS+T optimal for space- and energy-constrained portable instrumentation.
Availability
MAX6069CAAWS+T is available at Aetrix Electronics and suitable for portable sensors, precision regulators, and 4mA–20mA loop-powered sensors requiring stable component supply with guaranteed long-term availability and RoHS compliance.
Supply support for MAX6069CAAWS+T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, serving industrial, automotive, communications, and healthcare markets.
The MAX6069 family was designed specifically for ultra-low-power, space-constrained precision analog systems - delivering shunt reference performance in wafer-level packaging for next-generation portable and loop-powered instrumentation.
FAQ
What is the output voltage tolerance of the MAX6069CAAWS+T at room temperature?
The MAX6069CAAWS+T has a guaranteed output voltage of 2.500V with ±0.005V (±0.2%) initial accuracy at +25°C, as confirmed by 100% production testing and laser trimming of on-chip thin-film resistors per the official Analog Devices datasheet.
Can the MAX6069CAAWS+T operate from a 3.0V supply in a shunt configuration?
Yes - the MAX6069CAAWS+T operates as a two-terminal shunt reference and requires only a bias resistor connecting its OUT terminal to a supply ≥2.5V. With a 3.0V supply and appropriate RBIAS, it sinks 1.2μA–2mA while maintaining 2.500V regulation, per its Electrical Characteristics table.
Does the MAX6069CAAWS+T require an external capacitor, and if so, what value?
Yes - the MAX6069CAAWS+T requires a minimum 0.01µF capacitor from OUT to GND for stability, as specified in the Applications Information section. Larger values (e.g., 0.1µF) improve transient response in step-load applications but do not affect DC accuracy.
What is the maximum operating temperature range for the MAX6069CAAWS+T?
The MAX6069CAAWS+T is rated for operation from –40°C to +125°C. However, its guaranteed 0.2% initial accuracy and 20ppm/°C temperature coefficient apply over the extended industrial range of –40°C to +85°C, per the Electrical Characteristics table.
How does the dual-OUT/dual-GND pin configuration of the MAX6069CAAWS+T improve performance?
The MAX6069CAAWS+T uses redundant A1/B1 (OUT) and A2/B2 (GND) bumps to reduce package parasitic inductance and improve thermal symmetry. This lowers dynamic impedance variation and enhances PSRR - critical for low-noise, high-precision shunt reference operation in compact WLP layouts.
MAX6069CAAWS+T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package/Case:
- 4-WFBGA, WLBGA
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Reference Type:
- Shunt
- Output Type:
- Fixed
- Voltage - Output (Min/Fixed):
- 2.5V
- Voltage - Output (Max):
- -
- Current - Output:
- -
- Tolerance:
- ±0.2%
- Temperature Coefficient:
- 25ppm/°C
- Noise - 0.1Hz to 10Hz:
- 60µVp-p
- Noise - 10Hz to 10kHz:
- -
- Voltage - Input:
- -
- Current - Supply:
- 2mA
- Current - Cathode:
- -
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 4-WLP (1.16x0.88)
MAX6069CAAWS+T FAQ
1.How can I place an order for MAX6069CAAWS+T through Aetrix?
Please submit a Request for Quotation (RFQ) for MAX6069CAAWS+T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MAX6069CAAWS+T reliable?
The price and inventory of MAX6069CAAWS+T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MAX6069CAAWS+T is usually 5 days.
3.What payment methods are accepted for MAX6069CAAWS+T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MAX6069CAAWS+T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MAX6069CAAWS+T?
MAX6069CAAWS+T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MAX6069CAAWS+T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MAX6069CAAWS+T?
For technical support, including MAX6069CAAWS+T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MAX6069CAAWS+T requirements.
6.How does Aetrix verify that MAX6069CAAWS+T is sourced from the original manufacturer or authorized distributors?
All MAX6069CAAWS+T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MAX6069CAAWS+T meets industry standards.
7.What is the process for return or replacement of MAX6069CAAWS+T?
All MAX6069CAAWS+T units undergo pre-shipment inspection (PSI). If there is an issue with MAX6069CAAWS+T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MAX6069CAAWS+T part is unused and in its original packaging.
Return procedure for MAX6069CAAWS+T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MAX6069CAAWS+T Tags
-
TL431AIDBZR
Texas Instruments
-
TL431BQDBZR
Texas Instruments
-
AN431AN-ATRG1
Diodes Incorporated
-
LM4040CYM3-2.5-TR
Microchip Technology
-
LM4040CYM3-4.1-TR
Microchip Technology
-
LM4040EIM3-2.5/NOPB
Texas Instruments
-
AZ431LBNTR-G1
Diodes Incorporated
-
LM4040D20IDBZR
Texas Instruments
-
LM4041DIM3-ADJ/NOPB
Texas Instruments
-
LM4040DIM3X-2.5/NOPB
Texas Instruments
-
LM4040DIM3-2.5/NOPB
Texas Instruments
-
AZ431LANTR-G1
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
